Yzomandias Funko Pop
Funko pop figure as famous czech rapper Yzomandias
- Downloads
- 20
- Likes
- 4
- Rating
- 0
85 models
Funko pop figure as famous czech rapper Yzomandias
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
In order to protect the builtin OLED screens from sunlight as well as the lenses from scratches in the case, this thing fits over the lenses of the Skyzone SKY04X FPV goggles. I haven't found a solution to clamp to anything in order to…
Walksnail VRX adapter for Skyzone O4X goggle. Also include exhaust without mount for remix to other adapter
Skyzone 04x V2/Pro Fan Cover GoPro Mount Features: Designed to mount a GoPro “Unicorn” style on the Skyzone 04x series Goggles M5 screws and nuts needed Mount tilt: 60° upwards Print Settings Printer: Creality Ender 3 Filament material:…
This is a cover for the Skyzone Steadyview X receiver with screen and jog wheel that fits the HDZero goggles analog module bay. There are two versions, one with fan mount and one without. The Skyzone receiver comes with a fan but none of…
Remixed from https://thangs.com/designer/Mender/3d-model/skyzone04xPLATE.stl-929465 . This is a simple hexagon fan grill cover for the secondary VRX slot on skyzone's 04o pro and 04x pro goggles. I wanted to remove the unnecessary SMA…
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
(This shell of this model probably has a decent amount of inaccuracies and a whole lot of incompletion, use with caution) Should work for the O4 X,L, and O. The electronics are simplified but accurate dimensionally. The shell... was the…
I loved the Vallejo Paint rack and wanted to swap out my HobbyZone holder. I changed the base model to have left and right sides that add up to 300mm. The new rack holds 110 paints where the HZ rack held 45 in the same space. When…
This is a replacement motor mount for the HobbyZone Apprentice S 2 1.2m RC plane. It is not an exact match for the original part due to some changes I made to strengthen it and make it print better, but it fits perfectly, and seems plenty…
This 3D print file is a Walksnail VRX holder designed for easy attachment of the Walksnail VRX to Skyzone goggles. It offers a flexible mounting solution, allowing you to securely fasten the VRX to your goggles. Additionally, with the…
2S battery holder for the Skyzone goggles with a velcro strap mount to secure the cells. Print in PLA / PETG.
WIP Update 1 Only modeled the tallest IC's for now, but that should give an idea of the min clearance needed. Standby for more details when I have the time as well as the SKY04L module bay cover (I'm wondering if it's the same as 04X?).…
Nice for transport when not being used. Print in TPU.
Fan cover holder with antenna triple feed clamp mount on SK04O Sky04L Sky04X and EV300o
The new Fusion Board for the V3.3 Steadyview receiver in an ELRS version is a bit longer than the regular one. The standard cover doesn't fit. This is a custom made cover that fits the new ELRS Fusion Board.
It's a mix of 2 things. 4946834 + 5039701 = this remix (5196877) ===update/add==== 01.17.22 : add stl for TBS fusion VRX Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter Supports: Yes Resolution: 0.12…
Fed up with cables hanging off your face? Worried about the HD-Zero power cable frying? want to be able to easy switch between analogue and digital? This is my design for a module to fit into existing googles that you can feed power in…
I found on Tinkercad a 2S 18650 battery holder using the “skyzone” keyword. I liked the fact that it was designed for a back-of-head position and also for 2 18650 cells (not so heavy for the head). I made some modifications in order to be…
Printed settings PLA Support everywhere Use rubber band to hold any antenna of your choice. Followed Albert Kim's idea to secure the rubber band on the notches (see pic)
Designed for RC-Plane Aeroscout, fits on wheels with approx 76mm diameter and 20mm width. Mounted on wheel, held in place with rubber rings. No disassemble of wheel needed. I printed in PETG with supports.
This cover is designed to fit the Cobra X goggles to cover a SpeedyBee receiver. I printed PLA at 20% infill. I'm sure it would work with other filaments as well.
A quick remix of https://www.thingiverse.com/thing:4830132 I needed to fix my 7 turn helicals antennas a little up to balance better the google in my face.
Printed this model in PLA+ but any other filament should work as well. I used M2.5*12mm screws to secure vrx and M3*40mm to connect two parts.
* Update 1/22/22 * Added a stretched version of the fs_buddy design so stubby antenna can fit on the sharkbyte vrx and not interfere. * Update 1/17/22 * Added file fs_buddyfor04xwcap. This file is the fan cap, with an fs buddy attached to…
I several small modifications to make it more sturdy less prone to breaking the clips and some changes for V2
This is a replacement for the stock front landing gear support for HobbyZone Apprentice S 2 1.2m, but is not an exact copy of the original. This one should be a bit stronger than the stock one, fits well, and is a quick print. If you ever…
I attempted to create a softer tire for the carbon cub to minimize bouncing when landing on hard surfaces. This is definitely softer than the stock tire, but the jury is out on whether or not it minimizes bouncing. It is a small bit…
Idea from here: http://fishpepper.de/2016/09/04/fatshark-skyzone-fpv-goggle-diy-battery-pack-using-18650-cells/ Housing to fit the Skyzone googles. Take long cables, so you can wear the housing on the back side of the head. It also fits…
Hey everyone, this model is super easy to print, needs supports only for VRX mount, to complete the assembly u will need one 4.5x3mm m3 threaded insert and one m3 bolt.
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA / TPU
I bought two Floureon Lipos for my Skyzone FPV Goggles. To easy change and hold the lipo on the googlestraps, i designed this lipo holder. Install: clip the lipo holder on the googles straps. You can leave it there. to swap lipo, just…
This is a copy of the the foam which is being provided with the Skyzone SKY04X bundle. This is for the smaller, more narrow face plates.
I want to use a FuriousFPV V4 module with my SkyZone Sky02X goggles, so I made this external module bay to fit the goggles design. I'm still waiting my module to delivery, that's why I don't have any final photo. I'll put some updates…
Inserts for you Hobbyzone drawers for module https://www.hobbyzone.pl/en/modular-workshop-system/42-om02a-drawers-module-x-3.html and module https://www.hobbyzone.pl/en/modular-workshop-system/108-om02b-drawers-module-x-2.html
Remix of paired lens cover for SkyZone SKY04X.
Just a simple handle with a perfect snug fit for Hobbyzone drawers. Makes them look a bit nicer. Very easy and fast print.
Liroy scyzoryk Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.12 Infill: 15 **Filament:** Spectrum PLA Polar white Category: Keychains
SpeedyBee Receiver 5.8GHz Adapter for Skyzone 04X Pro Modular Bay This is a custom-designed adapter that allows you to mount the SpeedyBee Receiver 5.8GHz into the standard modular bay of Skyzone 04X Pro goggles . It ensures a secure fit…
Cover is holding by foam light blocker. Typically they should be installed.
This is a remix from https://www.thingiverse.com/thing:2922203 I made it 1mm thinner so it is fits on SKY01 now. And it is more flexible you can print with PLA and it will not break when you bend it during installation. It has a hole to…
I want to use a True-D V4 receiver on my Sky04X, so I decided to try to fit it. The board of True-D needs to be a little sanded to fit perfectly inside the bay, but it fits. This cover uses the original bolts and fits from True-D v4.…
Ink and metal paint holder addon for Hobbyzone paint rack. Can hold up to six ink bottles from liquitex or Vallejo metal color(35,5mm) and two standard dropper bottles. Holes for metal colors are not as deep as for the inks so you are…
Model This is a remix for a Skyzone SteadyView, make sure to look online for instructions on how to do this mod and double check everything before powering it on. Parts needed 1x 5V 500ma plus step down converter that can accept 11.1 to…
MADE BY SCRAYZOR FPV O4 Mega5 Antenna and Camera Mount by SCRAYZOR FPV Description: This TPU mount is specifically designed for the Foxeer Mega 5 frame, providing a secure and flexible solution for installing DJI O4 cameras and antennas.…
This is a 2S battery setup for my Skyzone Cobra FPV goggles. I've mounted it to the back of the standard head strap, which I've found to be the most comfortable arrangement. The battery case is designed with a groove for easy attachment.…
The 2 Files allow you to mod your Skyzone V01 Goggles to use external RX Moudlues instead of the internal diversity. This is a reupload of my original files i posted on thingyverse some time back… Here is the Manual on how to do the mod…
HDZero Goggle + SkyZoneSteadyviewX cover (Extended for stackable pins)
After a lot of hours of trying I've finally created this thing. The goal was to have a Fan and a on/off Switch on my Skyzone without modifing my goggles itself and without loosing warranty. Every button is still usable (even better then…
Tamiya Cement Holder for Hobbyzone Paint Station. Screw it on to the paint rack to keep it securely in place. The fit is very snug, to make it impossible to knock the gule bottle over. If the "manual" is still wrapped around your bottle…
Replacement element for mounting shelves in rodent cages. They are often bitten by animals :-) Element zamienny do mocowania półek w klatkach dla gryzoni. Często są obgryzane przez zwierzaki :-)
skyzone cobra sd sun protector
i wanted to mount the Fatshark Faceplate on the Skyzone. So i designed a clip and printed it with my Mendel90 3D Printer. You can buy it here: http://bit.ly/skyzone\_clip Here you can the the article about that mod on my blog (german) On…
Skyzone Cobra X v4 Lens Protector + Case/Box: PETG Layer height 0.24 9h Shaft diameter 1.6mm Magnete 5*3
Print at the angle, like on the image, so it has some strength along the loop too
Paint bottle placment sign for HobbyZone paint hanger https://www.hobbyzone.pl/en/stands-racks-and-hangers-for-paints/99-paint-hanger-36mm.html You can print it whit a color change to get at frame around the “sampel area”. Attach i with…
I tried to order corrective Lenses for my DJI FPV Drone (…
metalnow made a great attachment for the 9xR transmitter mount. I needed it to fit my slightly differently shaped SkyZone SKY-700D. The screw holes on the back don't do anything, but the screw hole on the bottom holds a 1/4" bolt and it's…
print the model twice. I recommend TPU. If you don't have TPU maybe scale it up by 1% so the tolerances work
There are 2 versions: light (1 prong, see photo) and sturdy (3 prongs). Both work with O4X and RunCam WifiLink 2 VRX. Use an M3 screw and a nut to secure. See the zip archive for the FreeCad source project. Fit is perfect printed in…
Friend broke the wheel hub on his carbon cub 1.3m. I designed and printed replacements for them. I recommend printing out of PETG. Glue using standard CA. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Supports:…
simpel sheet, 0.4 mm thick. Use simpel gluestick to adhere it to her end of your HobbyZone setup.
I created this super simple clip for SKY02S to keep them always quickly accessible on my backpack. It's made to fit 20mm wide strap. It may not survive running and rolling on ground, but for calm walk between spots it served me great.…
Set of faction-inspired badge models designed for clean dual-color 3D printing. These badges are stylistically inspired by fictional factions from the Czech game Grayzone Warfare, but are original fan creations and are not official…
I crashed my Flyzone Gee bee and destroyed the motor box. I designed this to replace it. I removed the steel balls that were there for weight. instead you can ether print this with more infill, or use stick on wheel weights inside the…
i just fixed the version of diepie and added some radii The model not in the right dimensions and also broken But thanks for the design! really usefull Please upload a photo of your make. This design is not for commercial use or selling!…
IMPORTANT - Must Read! One of the things that makes the Lymow unique is it's blades, however I have made this conversion template for anyone looking to convert theirs to the razor blade style as shown in the pictures. You can print this…
"Wedge" to provide a flat surface for mounting an external receiver module using double sided 3M sticky pad between the module and the wedge. Uses the original goggle SMA connector with nut over it to hold wedge in place, other end hooks…
Simple watertight water pot that fits perfectly into a large HobbyZone portable station container.
Special thanks to my model, Blizzard the Hillstream. Also it is the near the exact dimensions of a Gastromyzon hillstream loach, so it has come it is pretty helpful if you're weird like me and you like to measure your fish.
21700 powerbank case for skyzone. modeling by me. use 2x 21700 battery and 2s type-c charge module
A one-piece mount that puts a Skyzone M5 FPV monitor on top of a HelloRadioSky V12, with the M5 screen facing you, so you can see the monitor and the radio's own screen at the same time. It doesn't modify the radio at all. It hooks over…
A lightweight, 3D-printable servo cover designed for the Hobbyzone Super Cub S 2 RC airplane. The cover protects the servo area while maintaining the original appearance of the aircraft. Installation The cover is attached using a thin…
Add an adjustable 3 point head strap off AliExpress for ~$25 to your SkyZone 04X Pro googles! For the price this is an amazing piece of head gear. Very comfortable and the top strap is a must. It also gives the option to use DJI…
With this backplate the draco ground unit is mountable on this Sky04x Mount: https://www.printables.com/model/854805-skyzone-04x-walksnail-vrx-mount You need a M3x8mm screw
This is a 2S battery setup for my Skyzone Cobra FPV goggles. I've mounted it to the back of the standard head strap, which I've found to be the most comfortable arrangement. The battery case is designed with a groove for easy attachment.…
Print at the angle, like on the image, so it has some strength along the loop too
Cover is holding by foam light blocker. Typically they should be installed.
Set of faction-inspired badge models designed for clean dual-color 3D printing. These badges are stylistically inspired by fictional factions from the Czech game Grayzone Warfare, but are original fan creations and are not official…
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
This is a model of an insect like creature from the now open source, french MMO "The Saga Of Ryzom" ( http://www.ryzom.com ), you can find this and other models in the public repository at https://github.com/ryzom/ryzomcore-assets I…