422 models
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
The 3D printed mount is designed to perfectly fit the Sonoff SNZB-03 Zigbee motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnets, this…
Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…
A case for fitting the Raspberry Pi4 with Sonoff Zigbee V3 Stick . Needs: 4x Brass Inserts M3 x D4,6 x L3,0 4x Brass Inserts M3 x D4,6 x L5,6 4x BHS 3x6mm 4x ISO 7380-1 3x8mm Build should be selfexplaining, but: The 4 shorter Brass…
The switch was difficult to find on the bedside table at night, simply because it is so small. The switch also slips around quite a bit on a smooth surface. So I designed two different bases to make the switch more prominent. The V2 is a…
Tired of having to change the puny coin cell battery so much? Well go big or go home! With this case and a tiny bit of soldering you can now wait much, much longer to swap batteries! Takes just over an hour to print. No supports. I just…
I replaced my hallway lights with smart bulbs (Zigbee), but wanted the switches to still be functional. Most existing options wouldn't work because my hallway lights are set up as a 4-way switch with no neutral wire. I bought Sonoff…
Introduction and Use Case I am replacing some of my wall light switches with Zigbee scene controllers. One of the controllers I use is a “ Tuya ZigBee Smart Home Button Scene Switch Smart Linkage Smart Switch Battery Powered with Smart…
This 3D model showcases a modern, sleek design, perfectly suited for contemporary interiors. The model is holding the Tuya ZigBee Smart/WiFi Room Thermometer Hygrometer with an air of sophistication and technological prowess. Its…
**En français :** "Support d'Antenne Zigbee Sonoff : Installation Discrète et Optimisée !" Améliorez la performance de votre antenne Zigbee Sonoff avec ce support innovant et esthétiquement plaisant ! Conçu pour s'intégrer parfaitement…
This is a Holder for the Sonoff Zigbee 3.0 Dongle Plus that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the Sonoff Zigbee 3.0 Dongle Plus with WiFi Explorer Pro. (this one is for a thicker screen)…
This is a Holder for the Sonoff Zigbee 3.0 Dongle Plus that sits on a MAC M2 Laptop screen. Designed so you don't break the USB connector when using the Sonoff Zigbee 3.0 Dongle Plus with WiFi Explorer Pro. Will print without supports.…
Vidéo tuto :
This is a simple wall mount for the Sonoff Zigbee 3.0 USB Dongle. It is mounted on the wall using 4mm screws. It fits with almost any antenna you want to use because the included antenna is pretty bad. Be careful when removing the support…
Simple wall mounts for the Sonoff Zigbee 3.0 USB Dongle Plus and Plus-E. For use with home automation gear. Prints solid. Back side down. No supports. Dongle slides in from the end. lul.. Has space for a USB extension cable. Can be…
Wall mount for Sonoff Zigbee 3.0 USB Dongle Plus. I would advice printing regular version. With USB connected Dongle won't fall out even if there are some play. Printed it in PETG and PLA. PETG works great with regular version, but there…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
It's better printed vertically, with the flat side facing the bed. Insert dongle from the open side with aerial facing the flat side.
Update 2026: Das Ersatzteil wurde nochmal überarbeitet in der Version 1.2 mit nur 4 Schlitze. 4 Schlitze reichen aus um den Gewindering auf das Ersatzteil zu schlieben. Jetzt sollte das Ersatzteil um einiges stabiler sein. Außerdem wurde…
the sensor is from aliexpress: (20x25x71 mm) https://de.aliexpress.com/item/1005006008193742.html the two parts just snap together I would only print this in white :) Other colors including black will heat up more in the sun! printed with…
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
My another version of AAA battery case for Xiaomi Bluetooth/Zigbee thermometer. This variant arranges batteries on the sides so the whole thing has a slimmer shape better suitable for wall mounting. The case is designed to be printed…
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
Small holder to mount your Sonoff zigbee brindge on wall or another place. It is possible to use some of the prepared holes having a diameter of 2 mm for mounting. The second option is, for example, the use of double-sided adhesive tape…
A simple holder for Tuya tempeature / humidity sensors. It is designed to be hanged with one screw (see pictures). The sensor fits easily in the holder and is hold by gravity. Print in PLA or PETG.
Wer noch die alten Danfoss Adapter hat kennt wohl das Problem. Die beigelegten Adapter von den Hersteller sind einfach schlecht und können sich ganz leicht lösen. Habe dann teure Metall Adapter gekauft die man mit 4 Madenschrauben fixiert…
Držák adaptéru Sonoff Zigbee 3.0. Pro připevnění na polici nebo na zeď pomocí dvou šroubů. Adaptér je zajištěn v držáku zasunutým USB konektorem a našroubovanou anténou na druhé straně. Tiskárna: Longer LK5Pro Materiál: PETG, C-Tech,…
A simple case for a Raspberry Pi and the Sonoff ZBdongle-E, not ZBdongle-P! Pay attention, they are almost the same dimensions and look the same. I think all -E models have the label “Zigbee 2.0 USB Dongle Plus ” on them while the -P…
Those little Bluetooth thermometers from Xiaomi can be flashed with custom firmware to turn them into Zigbee devices. But Zigbee implementation consumes a bit more power and a small CR2032 battery may not last too long. This model…
Thanks to @CPS_Systems_639833 for the improved remix. The friction bumps are working great. I wanted to screw and not glue the holder to a shelf, so I added 2 mounting holes. The holder works for the P- and E-version of the dongle.
Based on whocares333's Sonoff Zigbee 3.0 Dongle Mount. I added two hooks to mount this sideways on a Skadis peg board. Printing needs some supports for the holding brackets and the Skadis hooks.
This is a wall mount designed for the smlight SLZB-06 PoE Zigbee coordinator. It might work for some other smlight models as well. The units have screw keyholes, but I lost the included screws and all the screws in my collection were too…
Same as the original model, but instead of the big logo-hole, it has neat ventilation stripes.
Quick and easy wall mount for sonoff zigbe bridge ( LINK ). You can use one or two screws to mount it. Printing instructions: no supports needed print in vertical position as on pictures I prefer PETG but other materials can be ok too…
Need 2 self-screws 2.9x13 or two hot-melt nuts M2 and two screws M2, for a better look use the handle as in the photo from here <3
I modified the original model to increase the size so it would accommodate larger zigbee temperature and humidity sensors like the ones from Tuya and Sonoff. I have also added a column off the back of it that includes a mounting hole so…
Sonoff Universal Zigbee 3.0 USB Dongle mount with 25x8x2mm magnet slots. I made this to mount my dongle externally to my rack for better signal.
Added recess for Command Strip (small poster) mount. Added hole for mounting. Flattened section to create a “bottom” for alternate orientation while printing. Added friction “bumps” to the side to add grip for dongle. Note: Using this…
This is a server rack mount bracket for an smlight SLZB-06 PoE Zigbee coordinator. You will need a couple of M3 heat set inserts and a couple short M3 machine screws in addition to whatever screws actually connect the bracket to the sides…
I use the Ikea Skadis Pegboard as a panel to hold all my home automation and networking devices. I designed this so I can fix my Sonoff RF Bridge on this pegboard. Prints in around 2:30. Support is needed for the pegboard pins. If you…
This mount can be used if you want to mount the USB stick somewhere not directly in the USB port (which is very much recommended due to interference). It has two small holes in the back for screws but I just taped it to the wall. It holds…
The original had two small parts holding the Sonoff that easily snapped. I widened them and connected them to the main body of the model to solve this problem. I used organic supports to print this on a cheap (and silent) Artillery Hornet.
As these sensors use batteries, I wanted a mount where I can remove the sensor, replace battery and mount it again without the need to replace the double sided tape. This collection includes the following mounts for: SNZB-03 PIR sensor…
With this model a ZigBee mini smart switch type WHD02 can be installed on a DIN rail.
A DIN rail mount for a mini Zigbee switch. You will need to print a tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab It can be found at*…
A simple holder for this cool SilverCrest Zigbee power strip. No supports needed, it can be printed with PLA or PETG
A holder for the Xiaomi Motion Sensor Zigbee You will need 2 m3 screws and 2 m3 washer
Holder for temperature sensor Zigbee, Tuya, Smartlife. The temperature sensor dimention: dia 40mm, height 12mm. The temperature sensor with remote control: d: 60mm, h: 20mm Printed flat with supports.
I wanted a rain gauge to plug into my Home Assistant for use with an irrigation system and found this guide: https://community.home-assistant.io/t/diy-zigbee-rain-gauge/255379/25 I didn't want to wait for the gauge body being delivered so…
A resetter for the mijia thermometer after convert from bluetooth to zigbee With this tool you can easily resett the device and bring in to pairing more Just use a little piece of wire
Very basic case for the SONOFF Zigbee Mini smart switch. Use M3 screws.
Bracket for mounting a SMLight SLZB-06 Zigbee coordinator Should fit snug when your printer is calibrated well, so the bracket can be used in any orientation. Bracket allows the device to be removed with the cable still attached. Should…
Different variants cases for the cod.m ZigBee Coordinator (CZC-1.0). Currently the default one for desktop use and a wall mount variant. Print the wall mount version with support for the mounting hole. Otherwise there are no supports…
Wall holder with two holes for magnets, you needs magnets 10 x 10 x 4 mm. Attention! this is the sensor with rounded corners In this case you need glue to glue it together Magnets:…
Wall holder with two holes for magnets, you needs magnets 10 x 10 x 4 mm. In this case you need glue to glue it together Magnets: https://www.amazon.de/gp/product/B06X41SRG2/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Pozwala wygodnie zamocować kontaktron Sonoff SNZB-04 ZigBee na oknach PCV.
I replaced the clips from the original model with mounting ears, so it can be mounted on a wall or shelf.
This is a small stand for a ZG-204Z/ZG-204ZL Zigbee PIR motion detector ( like these ) with a ball joint so you can position it just right.
I had issues with the original baseplate only fitting very small screws due to very little clearance for the batteries. I wanted to be able to use some generic 3mm wood screws which are very easy to come by, so I designed a new baseplate…
Adapter for ZigBee Door/Window Sensors to use as a window or door handle. This adapter is inspired by the eq3/HomeMatic HM-Sec-RHS [1] and the thing:4735627 [2]. Advantage/Disadvantage over HM-Sec-RHS [1]: (+) uses ZigBee (+) the window…
I remixed the model to be able to attach it to my 10" netwrok rack
LaskaKit ESP32-C6-DEVKit WiFi 6, Bluetooth 5, Zigbee 3D model vývojového kitu LaskaKit ESP32-C6-DEVKit WiFi 6, Bluetooth 5, Zigbee Stránka produktu: https://www.laskakit.cz/laskakit-esp32-c6-devkit-wifi-6--bluetooth-5--zigbee Github:…
This is cool invisible mount for the Sonoff Zigbee 3.0 USB Dongle Plus. Fit very well for E versions. Does not fit for P versions (P versions bigger) No supports needed!
The stand provided with the Tuya Zigbee temperature and humidity sensor was wobbly and in an angle. I prefer a more sturdy and vertical stand. I spent some time in Fusion360 and came up with this stand. Posting a make and liking the model…
- Box / holder for a small smart socket. (most often Tuya socket but more or less all versions and brands sold on aliexpress, amazon, temu etc have the same dimensions 42x42x22) - My use was mainly for the Voron V0 printer. - I don't have…
It the simplest holder i could come up with. May add a ball-joint to the back, in case i want to mount in a differnt one, depends, how well it will function.
A weatherproof (probably - use at your own risk) enclosure for the Third Reality zigbee contact sensor. I made this so I can mount it onto an outside gate. This is the sensor in question. EDIT: Added another version of the magnet holder…
Aqara Door and Window Sensor Weatherproof Enclosure - Use your Aqara sensors Outside This enclosure helps keep your sensor dry when using it outdoors. For a complete weatherproof kit—including the enclosure for the Magnet, spacers, and…
Since the adhesive version of the back plate of the Tuya temperature / humidity sensor (zigbee model TS0201 / MIR-TE100-TY) did not seem optimal in many places, I designed a compatible spare part for the back plate and based on this a…
I bought this little Zigbee hub gateway to add smart devices to my home, and it was laying around without a proper place. I've decided to create a simple support to allow me to stick it to a wall. So, I've printed mine in white PETG, with…
Einfacher Wandhalter für den SONOFF SNZB-02 Zigbee Temperatur/Luftfeuchtigkeit Sensor Ich habe hier eine einfachen, schnell zu druckenden Halter für einen SONOFF SNZB-02 Zigbee Temperatur/Luftfeuchtigkeit Sensor entworfen. Er wird mit…
Wanted to include the low-cost but nice Aqara Opple Zigbee Switch in my household. I am using the Gira 55 System, which is quite common in Germany. As the Opple Switch is to big to fit a frame I made my own. This Version is a Frame for…
A simple stand for the Tuya Zigbee temperature / humidity sensor. Print it in PLA or PETG. 15% inffill, no supports needed.
Back plate for Tuya TS0201 Temperature and humidity sensor (zigbee wifi) The hole is marking “top” because top and bottom slots are not the same size. SNUG FIT
Allows using a Zigbee contact sensor on a garage door. Designed to be attached with double sided tape.
I picked up this Newgoal Zigbee Tuya Smart 4 Channel Relay on amazon (https://www.amazon.com/dp/B0B978T5FT) I wanted to make an enclosure for it, a simple rectangle would've worked just fine but i wanted to make sure the buttons were…
Used to mount a ThirdReality motion sensor in a corner. https://www.amazon.com/dp/B09MVKWBFF ? Category: Household
Just a little resizing for holding this sensor
This project uses a XIAO esp32c6 as a zigbee endpoint device. It shows up as a switch in smartthings allowing you to toggle on and off a blast gate. For testing purposes, pressing the button on the board also activates the servo on and…
You will need: 2x M4 screws to wall 2x M3x20 screw 2x M3x5 screw 4x M3 nuts
Adapter for Zigbee-Thermostat/Radiator Thermostat from M30x1.5 to M28x1.5. Bought it HERE - including 6 adapters which are crap… ZIgbee2MQTT recognizes it as a Tuya TS0601. The original mounting thread has a size of M30x1.5 and I needed…
This is a round LED Lamp, including holders for a Powerbrick and a gledopto zigbee controller. You can use a whole 5 meter LED strip. There are two parts for testing the connection between the base and the center part. Print them first,…
Simple print to mount Tuya smart buttons wherever you want but also be able to easily remove them. They could have more than one use, when you need to change the battery or need to reset it. I use them with Home Assistant. I'll provide a…
⚠ Safety Warning ⚠ This project involves working with High Voltage (110V/240V) . Only attempt this if you are competent with electrical wiring. Ensure cables are secured properly between the provided strain relief nubbins to prevent…
Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)
This custom-designed part serves as an adapter between a SMART thermostat “ Tuya ZigBee Radiator Actuator Thermostat Smart TRV Thermostatic Valve Temperature Controller Support Alexa Google Home Smart Lif ” and the pre-existing heating…
A am using few Aqara Temperature Humidity Sensor sensors. But I was not satisfied with original CR2032 button as power source, therefore I made holder for 2x LR4(AA) combined with sun radiation shield. Aqara Temperature Humidity Sensor…
I would like to use my square zigbee hygrometer and thermometer in my AMS. This is a remix of the Silica dry box. Use it if you have square zigbee thermometer/hygrometer like ZY-ZTH02 or ZTH05 for example. Use support for the overhang.…
Has cutouts below the model to mount ~6mm rubber feet. Can be printed without support.
A slightly over engineered mount for a TuYa TS0203 Zigbee door sensor - optimized to be mounted with screws (in my case, outdoors, on my fence gates). The top snaps onto the body, but is ultimately designed to work with screws. BOM A TuYa…
Sonoff ZigBee Bridge Ultra Hub
Simple vertical stand for ZM-35ZH-Q PIR motion sensor from Tuya. Just print and press fit the device inside the plastic
For English please visit: https://wiki.permejdal.dk/TRÅDFRI_wall_switch Hvis du ønsker at købe delene, se: https://wiki.permejdal.dk/ZigBee_til_FUGA_kontakter For hjælp, se den tilhørende Facebook gruppe:…
Alternative housing for Sonoff Zigbee motion sensor.
I have designed a holder for the Tuya Zigbee motion sensor, available in two versions: Version with nuts V2: This version uses M3 nuts and M3x16 screws to ensure a stable attachment. Version without nuts V1: In this version, the screw is…
Corner and flat mounts for Aqara sensors - The corners are overly large as to cover / match the anchors of existing sensor mounts I had. Print instructions Prints without supports. Each type requires a sensor 'cup' to be printed with it,…
This dongle is based on the previous designs for the dongle. I have made some cosmetic changes to the corners and rounded the edges. Also I have included a mounting bracket so I can mount the dongle independently from my Raspberry pi. You…
Wall holder (hanger) for Tuya TS0201 Temperature Sensor. Use double sided tape.
A case for the Aideepen Zigbee CC2531 Sniffer USB stick, it might fit other models as well. With button access.
I bought a few of those standard-size temperature / humidity sensors and wanted to put them outside, too. To allow for this, I created the housing that will take one sensor and provides wall mount holes for two m4 bolts, spaced apart 38…
![Halter SONOFF SNZB-02 Zigbee Temperatur/Luftfeuchtigkeit Sensor [Holder SONOFF SNZB-02 Zigbee temperature/humidity sensor]](https://media.printables.com/media/prints/629178/images/4985457_f304ef28-adfc-4b7d-8e8c-93f9f1efc433_ee66351f-ad5c-4333-83ac-390003d84f66/img_20231028_130456.jpg)
![SONOFF Zigbee Smart Switch Enclosure [ZBMINIR2]](https://media.printables.com/media/prints/ff84d055-45a3-469b-bdf2-07a968dac712/images/11345809_780ebf93-1652-4545-8908-31bd31da8bf5_3e78a5af-9187-42a6-95fd-7fc8d6ead7a4/gemini_generated_image_vylb2yvylb2yvylb.png)
