514 models
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
A replacement zipper pull I made when the one on my backpack broke, and I couldn't find a satisfying replacement. I've used it daily for over a month now, and have no complaints. When slicing the base, please orient it hole-down for best…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). *2 x “12mm” wiggly eyes. Super glue (for the eyes and magnets). *If you do not have…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Hier habe ich 2 Varianten für Plastik-Spiralreißverschlüsse konstruiert; zum Einen die Variante PC5 für 6mm sowie die Variante PC7 für 7mm breite Reißverschlüsse. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This remix of N00P's zipper pull should be a tad stronger. I liked the design, but it kept wearing out. Please iterate on this one and make it even better! I encourage you to use your Slicer of choice to scale both pieces in thickness…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
Hier habe ich Slider u.a. für 2-Wege-Plastikreißverschlüsse 5mm konstruiert. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten eingehakt und dann vorsichtig nach unten gedrückt -…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
Constantine St. Benedict Zippo Stash Box.
Print approx. €22.50–€27.50 excl. taxPreliminary estimate for one variant
In diesem formschönen Halter finden 4 kleine und 4 große Zippo-Feuerzeuge Platz. Die Ausschnitte sind 33 x 13 mm bzw. 40 x 15 mm groß. Da das Modell nicht besonders stabil sein muss, habe ich im Prusa Slicer je 3 Perimeter vertikal und…
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for PETGSource material: PET
Der Reißverschluss ist ein unentbehrliches Zubehör für Bekleidung, Taschen und andere Gegenstände. Diese Zughilfe aus PLA bewegt den Öffnungs- und Schließmechanismus des Reißverschlusses. Ein qualitativ hochwertiger Zipper zeichnet sich…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Another design from the 3D printing emoji collection. Whether it will be magnet badges, pins or something else, there are many possibilities and can be customized by yourself. The emojis contain several parts and have to be put together.…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
How could a zipper pull not have a zip tie as a part of the design? I broke all of my zipper pulls on my jacket and had to replace them so I have made this zipper pulls that utilizes a zip tie. I have made two versions, one is the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Items you need: 2 x “4mm x 30cm” paracord. 4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). Super glue (for components and magnets). Suggested print settings: Layer height 0.2mm…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). Super glue (for magnets). *If you do not have magnets, I have included a 3D printed…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
ZippFizz tubes come in a box much too large to store efficiently. I printed out a few of these to keep all of our flavors organized. They can stack and are very robust. I selected 20% infill without supports.
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant
Dieser formschöne Halter bietet Platz für 8 Zippo-Feuerzeuge. Die Ausschnitte sind 40 x 15 mm für große Zippos. Die kleinen Zippos können mit dem beigefügten Adapter 33 x 13 mm präsentiert werden. Da das Modell nicht besonders stabil sein…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Yeep Phone zipper
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
This clip is actually a working zipper with rows of little fingers to cinch your bag shut. It does require some assembly. OK, the work required for this bag clip is way more than any bag clip should require, but once assembled, you'll…
Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…
Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…
This takes about an hour or so to print. It is a fidget toy made to look like a Zippo Lighter. I do not want this model to be copied but I do want people to remix this and modify it, but you have to credit my design. Like for example you…
Ever wanted to play with a Zippo lighter, but without wasting the flint and fuel? Now you can! This is a magnetic fidget toy that resembles a Zippo lighter. It makes a similar sound as the spark wheel of a lighter. For it to work, you'll…
If you liked my Zippy Bag Clip , but don't want to clip bags, here is a remix that's just the zipper. I also made it a little shorter so it prints faster. Printing The Zipper piece consists of a base and two rows of pivoting teeth, which…
A jig to hold a zipper slide while threading bulk zipper tape through the slide. There are two options, with and without a weighted base. Fusion 360 file included for your convenience. Note: the weight cavity and weight filling hole…
Did your zipper tear off while searching for Bigfoot? No worries, I got your back! This easy-to-print zipper can be printed within 5 minutes and will stand up to Bigfoot himself! Try it out if you don't believe me! * Bigfoot roars in the…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
There were more than a few complaints that my original zipper was a #%$&*!# pain to assemble. This one, blissfully, prints in place with almost no assembly. (Just close it, push the slider on, and then shove the locking key in the zipper…
28 mm paper clip is used as a base 🖇. Simple design made in fusion 360. Instead of a paper clip, you can use a piece of wire. When assembling, use glue 💧 It is better to place the paperclip so that its ends face the inside of the hexagon…
A completely printable and functional zipper. As a replacement or for your own e.g. cases, bags or cosplay projects. It's not the final version yet more of a proof of concept. But it holds together stable in all directions (as long as you…
This zipper pull print can add a custom decorative flair to an otherwise boring bag, backpack, or jacket. However, it's use is not limited to just zipper pulls. It can also be used as a: Keychain Pull chain finial Luggage charm Low-effort…
Looking for something unique, yet familiar, to accessorize your wardrobe? Make a statement that no one quite knows what it is. This necklace is a hack on my print-in-place zipper . It prints in several pre-assembled sections that then get…
Intro This keyring whistle is small but loud. Print a few of them and give it to your friends as emergency whistle. Why you'll love it? Small, ideal size for your keyring Really loud for its size A good gift for your friends - and…
Following the example set by nemokeine the holes in these have been enlarged from 3mm to 4mm for an easier time getting the 95 paracord through armourcraft's models. 95 paracord is thinner than the more widely know 550 paracord. Shown…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== 3D printable replacement parts for a standard…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== 3D printable replacement parts for a standard…
Originally wanted to make a rigid chain, but the zipper was just around the corner, so this is why this exists. Printed in PLA. You do need a 2 drops of glue to assemble the slider. Here the Onshape link for the native files
The 3mf file has been colored for printing on Bambulab with AMS. The Mickey Keychain LayerHeights file has the colors at different layer heights so you can filament swap for multi color. It makes a great zipper pull for backpacks.
Minnie Mouse Keychain/Zipper Pull. It makes a great zipper pull for backpacks. I've included a regular stl as well as two colored files for Bambu Lab AMS (one flat).
I loved LoboCNC's zipper bag clip but I wanted it to look more like a standard zipper. This will also work with LoboCNC's Zipper Fidget. I scaled a model from David Naoum on MyMiniFactory till it looked good and cut of the crown and pull.…
Uses 1.75mm filament for a hinge pin. It is better printed with resin as FDM broke too much. I will add a step and fusion 360 file for modifications.
Two models have been provided, print at 0.20mm layer height: “double_sided” - print 2 of these and glue together (CA glue is fine) for a nice two-sided keychain; bonus if different colors for squid body are used! Color changes at the…
Mickey Mouse Hand Keychain/Zipper Pull. It makes a great zipper pull for backpacks.
Multiple versions, also with all letters of english alphabet. Extra version for single paracord strand. I use lighter and pliers to fuse both ends of paracord and hide connection inside opening at bottom. No supports needed, print in…
Remix of op00's Zipper Pull . I needed a couple of new zipper pulls for a laptop bag that sees daily professional use in the field. It has a really fat zipper with quite a heavy pull. The original design by op00 was great, but far too…
This remix is 1.5mm high (half of original), has improved fit and added small lip to help with lifting it up to fill your Zippo with fluid. Print with TPU (I used Creality CR-TPU), standard settings, there will be no infill whatsoever so…
Zipper Pull which is easy to assemble. All you need is super glue.
This sled ensures that the lighter is placed properly in the cutting space. I also included a .svg template for you to use when making engraving designs! This item is parametric, meaning you can change how many slots it has, the border…
I designed this zippo holder originally for my chest pouch that I wear while I'm working on forest fire, you can see a picture of the chest pouch above. I needed some way to carry my zippo that was quick and easy to get to but yet would I…
I needed a zipper pull that could use a larger paperclip than the ones I was finding. I measured my clip and built a parametrized design based on the paperclip measurements. I haven't tried it with other clip sizes, but if you have a…
Simple to print Need Supports at the hinges The Pin is no need to print. Use some Filament instead.
The opening mechanism works and feels almost exactly like a real zippo. The spring for the latch can be replaced easily. The wheel is clicky and feels like striking a flint. The inside comes out when pressing on the little hole in the…
imagine a situation where somebody cut himself and he ask you to fetch the FirstAid kit in a backpack. WHERE? most backpacks have 5pockets+ and hiding places. you cannot afford to waste time in an emergency situation! here is the…
Also check out my parametric model where you can fully modify it https://www.printables.com/model/1021535-runner-zipper-slider-onshape-fully-parametric I've included a fusion 360 file, if you want to modify dimensions your self. I've…
The model is designed in such a way that it can be put on a zipper without unsewn the ends for the easiest possible installation. Therefore, it consists of several parts. I printed this with ABS, I think PETG would work just as well. But…
Printed with PLA, 10% infill, no supports
Shows one banknote for decorative gifts. Printing information Layer height: 0.20mm Infill: 10% Support: none Color changes: Start with Blue At layer #12 (2.4mm) swap to Beige At layer #22 (4.4mm) swap to Dark Grey At layer #37 (7.4mm)…
I loved the version @Pippa made but wanted to also give the option to pull a zipper if needed, so I added a hook on the other end. It's sturdy enough that I could pull up my jean zipper (sorry about that POV) lol. I wouldn't go yanking on…
I created a Zippo lighter case for the standard size lighter. It was inspired by https://www.thingiverse.com/thing:4222731 but I started from scratch to make it fit better. It uses a piece of 1.75mm filament (or similar) for a hinge pin.…
Pictured print is 50 mm wide in Geeetech Silk PLA Filament Metallic Gold: https://www.amazon.com/dp/B07RBSGZBM?ref=ppx_yo2ov_dt_b_fed_asin_title From the costume she wears in “Golden”
A zippo lighter stand for gridfinity. has choice of putting magnets in the bottom to help guide light into place but doesn't need them. Uses standard 6x2mm gridfinity magnets.
Made to replace the retainer box (a.k.a. pin box) on the bottom of my hoodie's zipper. Printed successfully on a Sovol SV06 with a 0.1 layer height. Note that it should be printed with the openings on top, so that you don't have to deal…
My design of a spinning toy with a geared puller. Step and STL file for "Spinner Body" thread is provided if you want to make your own version :) Print instructions Category: Mechanical Toys Summary My design of a spinning toy with a…
My beloved Golden Gate Park Tai Chi hoodie zipper pull broke off in the washing machine this week. I threaded a paper clip onto to the slider but it did not seem all that comfortable to use. A quick two sketch FreeCAD design and a 30mm…
Please visit the project web site for more information.
Holder for a ‘classic’ (1 ½'' x ½'' / 38mm x 13mm) Zippo lighter on an IKEA Skadis pegboard. Step files available for modification. No supports!
Wanted a better zip for a bag, so it could be locked shut. This enables that. I love the original design ! Tried to keep it close to the original in terms of style, I think I did that pretty successfully. The chamfer around the edge, and…
Two zippers where broken from my loved backpack. So it was not usable anymore. After plenty of testing i managed to get a working design. I the design only make sense on large zippers… The zipper pull is from here:…
This model is an organizer for multiple zippo type lighters (original and similar clones), from 2 to 5 spaces in a row to save space. Perfect for placing in organizer boxes or adapting to EDC organizers. Feel free to download the model…
Replicated a faulty old zipper foot and fixed it.
Zipper Jig for YKK coil size #3 and #5 (non locking) zippers. This tool makes instalation of the zipper sliders super easy. Works with most other brands as well. Video: https://youtu.be/cqvXgczWDz8 Requires: 1x M3 insert nut 1x M3x8mm…
A non melt/glue version with a clamping lock can be found here cord-stopper .
This is a awesome triple zipper fidget! you can use any filament(I used PLA) no supports and please print it with 0.15mm layer thickness when using a 0.20mm nozzel
The print file is set to swap colors for the top of the paw. Use the microcord of the length you want. Heat its ends with a lighter so that it forms a ball that fits perfectly into the print.
Whether you have many Zippos, or one you don't use anymore, repurpose it with this extremely simple print. It is a very quick and easy print and the size dimensions fit perfectly into a zippo with the insert removed. Would be great for…
I don't have any Zippo's so can't test fit it. But i will research it.
Yet another zipper pull designed to be used with a paperclip. Please check paperclip size on the attached image. It does not need any support to be printed. Please press both parts firmly with pliers. Happy using!
Print in place in PLA without supports, push the paper clip inside as shown. Thats all. I used cheap paper clip from Tedi.
While contemplating the Zippy model I printed, I thought it would be nice to be able to see the meshing and unmeshing of the zipper teeth, so I modified the original zipper slider to expose the merging action of the two zipper halves.…
Had a few Zippo lighters scattered about the desk space, so made a simple display stand that can hold up to 6 lighters while taking up only a smallish footprint and still being easy to access.
Zippo belt clip with lock to prevent the lighter from falling.
I made this replacement zipper pull for a jacket. It's easy to grip and fits standard zippers. Printing material: TPU (90A/40D is fine) layer height: 0.2 mm infill: 100 % Never printed TPU/Flexibles before? See this guide by Prusa . Use…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== 3D printable replacement parts for a reverse bale…
I created a funnel to suck the air out of the filament zipper bags. It fits on Dyson V10 or newer vacuum cleaner. The release mechanism is a little bit stiff. I think this will be better than a lax fit. Happy printing ;-) Print…
A tool that allows you to pass the slider in a zipper by meter.
Stand for classic Zippo lighter. Display your lighter in a modern way.
This is a little jig for better handling with zippers. If you are a tailor this is a must have for you! You can build the zippers easy like shown in the pictures. Just clamp the jig to a table. ( clamp wide 12mm, thickness 3mm) But this…
This two piece item joins the two ends of a cord - simply tuck the two ends of the cord into the inner piece and click it into place within the outer hood - now you have a handy thumb tab - great for zips on outdoor gear where you need…
The EZ Zipper Pull is a solution to the common problem of broken or missing zipper pulls. Its a simple two-part design consists of a inner and outer part, which can be easily printed using a standard 3D printer. The design is simple yet…
Sewing machine presser foot for zippers. Print with sufficient detail in something that will give you good bridging and little stringing, optimised to need no supports. Keep in mind that the attachment bar is not metal so don't just drop…
This is a template to print an zipper onto a egg. Print instructions Category: 2D Art Summary This is a template to print an zipper onto a egg.
Loved the original design but wanted to add the Zippo logo to it. Same print instructions as original.
Mickey hands heart key chain/zipper pull
Easily insert cables into clamshell sleeves with this zipper tool! Feed your wires through the funnel, and the rounded part through the sleeve, then pull! The zipper will easily nest the cables inside of the sleeve. I intend to made more…
I found a few of these bomb beads for paracord, but they just didn't print nicely or work well as zipper pulls/toggles. After a few goes at designing , I cam up with something that worked, looked good, and printed easy. I like that it…
Ersatz-Reißverschluss-Halterung Unsere hochwertige Ersatz-Reißverschluss-Halterung ist eine perfekte Lösung für kaputte oder abgenutzte Reißverschlüsse. Das Set besteht aus zwei Teilen, die sich durch einen ausgezeichneten Grip…
Tired of struggling to insert or add cables inside cable sleeve? This 3D printed tool makes it a breeze! Simply insert your cable into the tool, slide into the sleeve, and pull. Print Settings: Walls: 3+, making it completely solid Use a…
![Zippo Sled/Frame for Laser Engraving [Parametric]](https://media.printables.com/media/prints/37596/images/371404_766640a4-15f9-47ac-a829-ef304d70ca54/61786212252__20a5fd51-6daf-430c-bd81-ff0c759441ea.jpg)
