936 models
This is a replacement motor mount for the HobbyZone Apprentice S 2 1.2m RC plane. It is not an exact match for the original part due to some changes I made to strengthen it and make it print better, but it fits perfectly, and seems plenty…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Designed for RC-Plane Aeroscout, fits on wheels with approx 76mm diameter and 20mm width. Mounted on wheel, held in place with rubber rings. No disassemble of wheel needed. I printed in PETG with supports.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
Inserts for you Hobbyzone drawers for module https://www.hobbyzone.pl/en/modular-workshop-system/42-om02a-drawers-module-x-3.html and module https://www.hobbyzone.pl/en/modular-workshop-system/108-om02b-drawers-module-x-2.html
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Da wir das Gerät nur bei Gebrauch aufstellen, nervte mich auf Dauer das Kabel. Ich habe eine einfach anzusteckende “Kabeltrommel” entworfen, damit endlich Ordnung bei Nichtgebrauch entsteht.
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
An extended magazine for the Dart Zone Dictator. You can load darts from either side, as many as you can fit. There are two versions: a single length version for printing on large format printers, and a two-half version with a binder…
Print approx. €5.04–€6.15 excl. taxPreliminary estimate for one variant
WARZONE Keychain + your NICKNAME / TEXT Below are videos on how to edit the TEXT on the back of the keychain and make color layer change. How to ADD any Text to your STL file (keychain) in PrusaSlicer. How to use Layer Change to make…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
100x160mm sign, with art of a fat, happy toad. We put ours up by the garage door where the 2lb Toad of Doom hangs out. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
This model is part of the Monthly Email Collection’s Welcome Pack from 3D Toy Zone. Get more models like this direct to your inbox, free of charge on my web site A fun articulated dragon, my version of one of the most popular toys for 3D…
(its left arm didnt print properly ;-; i suggest cutting it off in slicer and printing separately too) Im printing the model like this to save time and filament^ Use color painting (or equivalent), or print white and paint. I printed the…
Update 20240718: added HD version. Tips: It stands pretty well when printed with 20% or higher infill density! This is the fan art of Sharkboo from Zenless Zone Zero. The item is .stl files for the figure, designed for 3d printing. I…
To build this - you will need one of each of these parts that are included (Choose one of the cylinders that is included) - along with a Bic Pencil spring (the ones that are hexagonal and look like this:) , and a toy screw or 4-40 x 3/8in…
Once in a great while, I have the time to take an afternoon nap. Unfortunately this somehow encourages other family members to start making more noise when they see dad sleeping in the afternoon! So as a joke, I created this sign to let…
A grip I modeled after the Nerf Raider/Rampage that attaches to picatinny rail. It's not an exact 100% one to one of the grip but it's as close as I can get, and it feels the same in the hand. It's my favorite pump grip Nerf has made, and…
This needs 2x M3x6mm SHCS and 2x M3 nuts, print all parts without supports. Press the M3 nuts into the inside of the stock point, then screw the SHCS through the picatinny, through the stock point and into the nuts. This attaches to the…
takes a few pieces of .125 in rod for support. split for smaller printers(or any printer for that matter). can hinge on the "eye" but don't necessary recommend it for stability purposes. Category: Props
This is a printable replacement magazine built mainly for the Diana, but it also has notches for the Worker Nightingale, and the Firerat (untested, also an uncommon blaster). It gravity drops from the Diana, but not the Nightingale. These…
A miniature "sandwich-board" or "A-frame" style sidewalk sign that reads "Disney ZONE". Print-in-place, hinged at the top and support arm in the middle. Easy print, should work decently on just about any well tuned FDM printer. Print…
This design is a modified version of the case shown in the video that I made. A lot of people requested a case without the PC component mounts inside, so here is the plain storage container version! This model has even functional…
These are drop in replacements for the top most red plates on the Dart Zone Outlaw. To remove your stock plates, undo the 3 screws, and then you will need to pull them out. There is a clip towards the back of the plates near the rear iron…
This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel. Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the…
To install, start by butterflying the shell. Remove the original frontend. Drop in the new frontend and then button up the shell. For printing, I like to print with the front on the build plate, with some supports for the larger…
Hi Josh, Here is my collection of killzone weapons. As always still lots ta do on my projects list. But maybe there is something here worthy of your project. I'll upload Armour and helmets in due course. Do check the sizing suits your…
Would you like your Dart Zone Max Outlaw to be more accurate, and look awesome while doing it?? Look no further than this drop-in replacement part that uses the “Ex” BCAR design by Epicxxx. This is installed just like the rest of…
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
This is a drop in replacement for stock red faux-picatinny that is on the Dart Zone Max Outlaw. To install, remove the stock panels (save the screws) and press in the new panels you have chosen. Insert the screws into the screw ports. You…
"Get out of here stalker." This is a set of parts to build 28mm miniatures suitable for skirmish games such as Zona Alfa and This Is Not a Test. They are scaled by default to Stargrave miniatures. Warhammer 40k miniatures will likely be…
Update 27Dec2022-All files have been updated; more Detail for both spring and elastic versions. Spring version clearances updated. Both require one 7/8" 4-40 screw or similar. Spring release requires one 3/8" 4-40 screw. Update…
In order to protect the builtin OLED screens from sunlight as well as the lenses from scratches in the case, this thing fits over the lenses of the Skyzone SKY04X FPV goggles. I haven't found a solution to clamp to anything in order to…
To print these, stand them up on the “back” of them (where the flat bit is) and have supports running up them where the letters are. I heavily recommend tree support. Be careful when removing the supports, as the “a” letter is fragile. To…
This is a complete set of safety zone parts with barrier, attachable to the Carrera tracks with these red connectors (check my other designs if you want to print some of these:…
A simple funny sign, maybe for a man cave or wc or where ever you like... Designed to be printed in 4 colors using filament changes. Slice at 0.2 mm. Size is 14cm width by 21cm Print instructions Category: Signs & Logos Print Settings…
To install this spring spacer, open up the blaster and remove the spring/plunger guide peg. Slide the spacer over the peg, replace peg into blaster, then close up the blaster. Closing the blaster may be a pain as the parts have a tendency…
Gamer Zone Schild/ Gamer Zone Sign - print the gamer sign with multimaterial or a single extruder with manual color changing. Have fun with the Gamer Zone Sign! Follow us on: https://www.instagram.com/3dpoesie/…
Mutated zombie stalker from the Zone, wearing tactical gear, perfect for dark sci-fi and post-apocalyptic scenes.
Materials: - body - black PLA (any brand) - letters - transparent PETG (any brand - whiter better) - Bluetooth LED strip - magnets dia. 5, length 5 - glossy silver/chrome tape (back of the lid - distributes light better) - super glue -…
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
Tinkercad link: https://www.tinkercad.com/things/0kRpBS4Cg1W?sharecode=6kN3a2g34ayUWGJo7YCtOi2dTgR2xReh_tc8fQjRNHo Noncomercial use only. Feel free to remix/adjust as needed.
A command zone with room for a standard size commander and a manual two digit life counter. The stl has tolerances big enough to print with a Davinci Jr. 1.0 with 0,4 mm nozzle (and some for the cover) The number rotors are a dumbed down…
Walksnail VRX adapter for Skyzone O4X goggle. Also include exhaust without mount for remix to other adapter
This is a fan art of Hoshimi Miyabi Chibi from Zenless Zone Zero. Let me know if you spot any issues, and I would love to see your print! Contact me: Twitter @ CHCH1818
Came across this outstanding graphic and decided it needed to be turned into a fridge magnet. Design Loaded the artwork (I believe I originally found it on MyStickerMania ) as a PNG into Adobe Illustrator, traced it, exported it as an…
Print both the left and right sides, this is installed by opening the blaster and pushing the left safety delete into the safety hole until it bottoms out. The left safety delete goes into the left side of the blaster if you were looking…
Skyzone 04x V2/Pro Fan Cover GoPro Mount Features: Designed to mount a GoPro “Unicorn” style on the Skyzone 04x series Goggles M5 screws and nuts needed Mount tilt: 60° upwards Print Settings Printer: Creality Ender 3 Filament material:…
I highly recommend that you watch the full build video before attempting to build this! Check out the video here: You do not need threaded inserts for any parts of this build, even though you see it in the video, the design is changed so…
BLASTER OVERVIEW The VP-S (or the "Venom Pro, Streamlined") kit for the Dart Zone Venom Pro is a kit that evens out the proportions of the blaster while also extending the battery compartment and allowing the use of Acro P2 mount pistol…
Dart Zone Max Solo Picatinny Dart Holder and Sight
Basic overview: This is a drop in replacement barrel for the Dart Zone Solo Pro that is designed to allow it to fire mega darts, but I designed the model in a way that it can not only also still fire half darts, but fire rival ammo too!…
This is a cover for the Skyzone Steadyview X receiver with screen and jog wheel that fits the HDZero goggles analog module bay. There are two versions, one with fan mount and one without. The Skyzone receiver comes with a fan but none of…
A chain-pistol conversion for the Dart Zone Outlaw! This customizable-length chain and the matching rotation mech serve to increase the capacity of the Dart Zone Outlaw from 6 to 12, or up to 18. A piece of filament in each link's hinge…
Thank you MiGarro! Parkside X20V battery to Ferrex/Workzone Titanium tools (LY770XS-Li-20V-F battery) assembly info (original project): https://www.printables.com/model/329087-parkside-x20v-team-battery-in-ferrex-tool-battery-
Add a stock to your MatrixFire by removing the orange sling point. Update 27Dec2022: Split files for printing in two pieces. Gives an uglier print, but is MUCH stronger than the single piece. Requires 3x 7/8" 4-40 screws to attach.…
Buffer Plate Sling Mount for the Nexus Pro hardware needed: 1 5mm x 20 mm bolt, with a head no wider than 8.5mm 1 5mm nut with 8mm wrench flats don't overtighten, your buffer tube is made of plastic Update: uploaded a .step file of the…
A Simple drop in replacement barrel for the dart zone solo, still folds up neatly. The barrels need to be indexed manually but they have a little clicky stopper inside to make sure you dont stop halfway. Needs an O-Ring (Size #9, if that…
This is an overstable approach disc similar to a Discraft Zone, or MVP Entropy. Prints well in PLA, but for best results and durability, print in TPU.
This is a drop in replacement for the max stryker 2.0. It is not compatible with the stock barrel. Thanks to OOD for providing the Blaster to design for! Don't have a printer? Order from OOD! Affiliate link !
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…
New version V2 available here: https://www.printables.com/model/1437390-mtg-commandzone-stand-v2/file Introduction Introducing the MTG Commandzone Smartphone Stand – the essential accessory for multiplayer Magic: The Gathering games. This…
This is an accurate dummy model of the Dart Zone SCAR barrel, used to help designers add proper clearance and tolerancing to their printed blaster designs. To be abundantly clear : This model is not a SCAR for you to print and use on your…
This cowl is meant to be a replacement one for Parkzone's P-51 Gunfighter. Things to tinker with: wall thickness There are three files, one with a wall thickness of 0.8mm, another one with 0.4mm and one solid one for you to experiment…
A hair trigger for the Nexus Pro and other similar platforms, since I felt that the stock trigger pull had a sloppy feeling. Added bonus in the trigger lock removal, that now enables You to safely de-prime the blaster. The safety is still…
This is a working replica (and a remix of a Clockspring design) of the Mystic Seer from the original Twilight Zone series https://en.wikipedia.org/wiki/Nick_of_Time_%28The_Twilight_Zone%29 Print instructions Here is a link to the Seer in…
Remixed from https://thangs.com/designer/Mender/3d-model/skyzone04xPLATE.stl-929465 . This is a simple hexagon fan grill cover for the secondary VRX slot on skyzone's 04o pro and 04x pro goggles. I wanted to remove the unnecessary SMA…
These accessories are designed to fit the Workzone or Parkside Pegboards from Aldi and Lidl they may fit other pegboards which have the teardrop shape (see photos) The Pegs are 8.5mm diameter with a 4.5mm slot behind it to hold it in…
Imagine keeping a SPRING SPACER under a paywall. Should've taken the $20 Available in 10, 15, and 20mm. Give your Stryker 2.0 an extra boost of power for FREE . Print it yourself, your siblings, your friends, or have a buddy print them…
A foregrip for the Dart Zone Venom that holds a mag
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
Just a simple Command zone tray for playing commander in Magic the Gathering.
Three railing compatible with Zone Mortalis platforms (4mm). 48mm long single 48mm long with some tubes 68mm long single I printed theses with a resin printer. They are too thin for filament printers.
Modeled the best girl's weapon from ZZZ. split for smaller printer with tabs for assembly, may need glue or sanding for them. had one part that took a bit for force to go in place, check out the v2 model for an update to that. Category:…
https://paypal.me/radicalreel The reinforced version is not tested... but should work too. You have to print it on the reinforced side though.
modeled this up at popular request. takes a 1/2 inch rod for support and assembly. Category: Props
Dart Zone (Adventure Force) Nexus Pro shotgun-like pump foregrip kinda a hybrid pump grip / angled foregrip note, the roll bar up front is a thumb rest. meant to be held with thumb angled upwards like a 'traditional' rifle grip, not…
(This shell of this model probably has a decent amount of inaccuracies and a whole lot of incompletion, use with caution) Should work for the O4 X,L, and O. The electronics are simplified but accurate dimensionally. The shell... was the…
"Gamer Zone" and "Do Not Disturb" Door Sign for Room Just under 40 gr. PLA. The last image has the measurements.
Replacement Dart Pusher for the Dart Zone MK3 flywheel blaster. Designed to correct problems with Jamming, and Double-Feeding. in stock form on release**, the MK3 has problems with jamming when using Talon magazines as well as problems…
Das ist eine modifizierte Version der originalen Separatoren, allerdings teilt er den Schub in 6 Fächer auf. Es handelt sich dabei ein teil welches ohne Support o.ä. gedruckt werden kann. Die Trenner sitzen relativ eng - je nachdem wie…
It's finally here! Introducing the Shrub Cylinder - a replacement cylinder for the Dart Zone Outlaw that uses very little hardware and improves performance! This model is designed to be easily printed and use minimal hardware, and can use…
This is a remix of some of the Zone Mortalis walls by Eberleg found here: https://www.thingiverse.com/thing:2609090 Not all files have been fixed, only the ones I needed. The only adjustment made is that I have made them solid. This…
This is a remix of the double doorway with bulkhead by Eberleg found here: https://www.thingiverse.com/thing:2609112 The doors have had the aquila removed for use with Horus Heresy / 30k but are otherwise unchanged. The double bulkhead…
The Repeater Pro Extended Stock is a 3D-printed upgraded stock for the Dart Zone Max Nitroshot+ Repeater Pro. With a similar design to the original, this replacement increases the stock length for a more comfortable shouldering experience…
Si te han roto el corazón, puedes darte revancha con esta sorpresa amarga…
Keychain Warzone armor plate. Rozměry 24x6x33mm. Zvolil jsem materiál ABS kvůli větší odolnosti a poškození od klíčů. Tisk bez podpor. Doporučuji zapnout možnost “límec” pro větší stabilitu tisku.
The Trivictus PCAR spirals in the DartZone SCAR dummy model. 4 walls 100% infill
Default size is 50mm diameter and 10m height
Castellano Llavero del juego Zenless Zone Zero Este llavero representa el logo del juego Zenless Zone Zero. Está diseñado en Fusion 360 y cuenta con un agujero para la anilla en la parte superior. Dimensiones Alto: 36 mm Ancho: 31 mm…
A theatre building remix for a generic SciFi setting, at 6mm scale. (Funnily enough, CaptainFathom just re-uploaded these. I've been working on repairing a few of these to make them suitable for 3D printing.) I've added extra detail and…
MAKE IT YOURSELF - OZONE GENERATOR! When I saw the prices for assembled ozone generators that range from $35 to $50, I thought it would be much cheaper to make it myself. So I bought an ozone generator (10g/h, 220V) on Aliexpress for…
A quick remix of Red Cowl's excellent extended muzzle for the Dart Zone Outlaw foam dart blaster, which incorporates either 3 or 4 vertical cuts to resemble a muzzle brake. Visual inspiration comes from the muzzle brake on the Desert…
These models are for changing the grip size of Yonex Ezone 100 racquets. They may work for other Yonex models, I can't say. Yonex is particularly challenging because the original pallets are fused onto the carbon fiber body (hairpin) of…
Multipart or AMS Print files for Tabletop Deployment Zone Markers. There are some variants with or without Text, just try what fits your needs. You could allways add Text or Color in your Slicer. Best printed with an AMS and oriented Text…
A Shortened Magazine Release for the Nexus Pro, Max Stryker, and Dart Zone Pro MK3 When primarily using half-darts with the magwell adapter, the main magazine release is not used. So I reduced its size to get it out of my way. prints…
Sunshade for Mybo Ten Zone scope. You only need a rubber band to hold it in place Pare-soleil pour scope Mybo Ten Zone . Vous avez seulement besoin d'un élastique pour le faire tenir en place Print Settings Printer Brand: Alfawise…
A Long Hall exhibition building for use in table-top wargaming in a generic SciFi setting, played at 6mm scale (true scale). I've added extra detail and scaled this specifically for 6mm scale. Other Designs. This model set is intended to…
This has a threaded front end so you are able to use this with the “ex” bearing centering and rifling devices. It is important all of these parts are printed at a .12 layer height. The female threads do not like to print at higher layer…
made the weapon of the best girl. takes 1/4 in dowels/rods for reinforcement and a 1/8 in pin for the saw blade. split for smaller printing. Category: Props
prints optimized in 0,3 layer at 10min Have fun paint as you like DRYbrush PLEASE see all the other FREE stuff in my account
I loved the Vallejo Paint rack and wanted to swap out my HobbyZone holder. I changed the base model to have left and right sides that add up to 300mm. The new rack holds 110 paints where the HZ rack held 45 in the same space. When…
