Counting matching models…
Pokemon - cookie cutter set 002 The file is about 60 mm tall and can cut up to 8 mm dough and can be printed with a 0,4 mm nozel and 0,2 layer height. Its a 2 piece item, one for cutting the cookie dough and one for modeling . Best to…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Working off of a design by @Jeroen P, I've had to remix…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is my 3rd Rendition in a series of locking carabiners I've designed. The…
Din rail with exact dimensions (screenshot shows them half). The files attached directly and shown in the images are 4TE (Teilungseinheiten, 1TE = 17,5mm) long. I attached a .zip with 1TE, 2TE, 4TE, 8TE and 12TE. Fusion 360 project file…
🐉🔥 WallArt – How to Train Your Dragon 002 Take to the skies and bring the magical world of How to Train Your Dragon to your wall! This detailed WallArt is inspired by the unforgettable world of dragons, Vikings and epic adventures. The…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** My wife asked me to print her a seed starter tray system that would fit in a…
Minimalist Filament Spool Holder with Bearing System (608ZZ Compatible) A simple, sturdy, and smooth-rolling filament spool holder designed for reliable everyday 3D printing. This design uses only 2 printed parts and features a tool-free…
A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly BMW 2002 Turbo. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended if…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This finely detailed bust captures the iconic look of Spider-Man from the cult movie era of the early 2000s. The model stands out for its fidelity to the original source material, from the characteristic raised lenses to the precise…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This model is compatible with the lego system.
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
This is a model for an end cap of a Thule Omnistor 5002 awning. Dies ist ein Modell für eine Endkappe einer Thule Omnistor 5002 Markise. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2…
I'm not a 3D Model designer but I really want a case for my Pi 5 which also uses Geekworm X1002 HAT with an NVME SSD. So I remixed the case model by @pyrho as I really like it and made it fit the Pi 5 with the bottom NVME HAT. I also…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I like this drybox, except I find that the slit for filament exit opens up the drybox too much to the environment and reduces the life/duration of the desiccant - and it stops working and needs to be renewed (the RH rises back to match…
Simple Case for the Whuzi ZK-1002T 2x100W Amplifier Print Settings Printer: Elegoo Neptune 4 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Filament: Elegoo Rapid PLA+ PLA Grey Category: Music
Together with his sister are my first attempts at making 3D sculptures, I checked as far as my knowledge goes to avoid errors, but I may have missed something, I used Blender 2.8 In the base I added my username and a number, just to keep…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
🐦✨ WallArt – Kolibri 002 Bring the incredible elegance and energy of the hummingbird to your walls with Kolibri 002! This detailed WallArt captures a hummingbird in flight with beautifully structured wings, delicate feather details and…
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Feel free to adjust the size however you like. Join my Patreon to support my work and unlock awesome perks: 🛠 Commercial Licenses: Get the rights to sell prints of my models. 🚀 Early Access: Download new designs before they go public. 💎…
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
Update 17-Apr-2024: For Dremel model 3000 I added a separte post, see NOTE below! When working on difficile parts with a Dremel grinder it is good idea to guide the part by hand rather than the machine. Although the Dremel is model 315…
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
Dimensions: L- 214mm, W- 66,38mm, H - 59mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the Discover. Create. FLEX collection. Visit the…
Ersatz Gummipuffer Heckklappe am Megane 2 Coupe Cabriolet. Da dieses seid Jahren schon nicht mehr bei Renault verfügbar ist, habe ich selber einen Designend. Die Montage ist etwas unentspannt, da die Aufnahme sehr eng ist. Mit etwas…
Welcome to The Low Poly Auto Show! This is a low-poly BMW 2002 Turbo. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size,…
6002 Bearing Standard 6002 bearing with rollers. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth Operation
Pot de fleur minimaliste, design. Facile à imprimer. Diamètre intérieur 19cm / Hauteur totale 16 cm. Design and minimalist flower pot. Easy to print. Inside diameter : 19 cm / total height 16 cm
Another Air purifier which should be used with some additional active carbon It can be used in 2 ways: Print only upper part, insert 6x3mm magnets and snap it on exisitng filtration fan Print everything and make a closed loop ventilation…
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
3D Model of toy hammer for children for 3D printing Dimensions: L- 67,64mm, W - 12,08mm, H - 11,53mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for selber…
I printed it on ordinary cr6 se with standard PLA. I have used 0.16 layer for better resolution of marks and numbers.
BMW 2002 Silhouette wall art
First version was very lightweight, also easy to install. This version more strong and more crush ready. Also some different design v002 and v003 difference only arms holes, v003 much wider to fits more arms variations. This is an…
Topdon TC001 and TC002 thermal camera lens mount Rasperry pi, left: with macro lens 76.2mm, right: without (both images scaled and cropped to show the approx. the same excerpt. The closest distance where the image was as sharp as possible…
This is a vintage iconic model dating ca 1970. The print from the cover picture was made with blue silk PLA. The other make was made with neon green translucent PLA and variable height + adaptive cubic infill (hence the stripes)… I'm…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Inspired by an idea from @3DBrooklyn, I came up with this design that is easy to…
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
Attach 6.5 and 6.75 speakers to a 6x9 factory Toyota/Lexus mount. Category: Automotive
🐱 WallArt – Cat Door 002 Add a playful little surprise to your doorway with this cute Cat Door WallArt! This design makes it look like a curious cat is hanging around your door, turning an ordinary doorway into a fun and eye-catching part…
Build plate is held at 45 degrees on roll and 15 in pitch, so the dripping is faster. No supports when printing. Category: 3D Printer Accessories
Ball joint split into two parts, hold together with screws. Like this the ball can easily be inserted to the joint and the grip / friction can be fine tuned. Slides on the original metal part which is glued to the glas and interfaces the…
I printed it with the following settings: 0,4 mm nozzle 0,2 mm Quality PLA No support Infill 15% cubic 3 Perimeter Printing time with these settings 37 minutes on a MK3S+.
Slides in the holes on the bottom of 18V Ryobi battery chargers (Model PCG002 [the one that specifies there are 114mm between the mount holes - see photo] and possibly others) so they can be mounted on pegboard. My print settings (you may…
Highly articulated 3d-printable action figure. The SUBSTRATUM Enid figure is utilizing the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different figures. As the second…
Here are replacement drive gears for Athearn and also for Walters Life-Like Proto 2000 HO scale locomotives. There are 2 files for the gears: The "Original" file is the same exact total length as the Athearn gears, part # ATH60024. The…
A stylized low poly Ivysaur, evolving from Bulbasaur. A great addition for Pokémon collectors and 3D printing fans.
The part number of the w639 glove storage compartment is A6396800291 You can buy a replacement compartment for roughly 120€ from ali express sellers or 250€ by amazon sellers. But we are here for nifty DIY solutions, right? This Repair…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
RSH-002 Cigarette Case (Curved) Curved cigarette case for regular (10 pcs.) and slim (12 pcs.) cigarettes. Each is available in several variations. Update from 12/25/2025 I added another type of decor. Updated February 3, 2026 Added a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've tried a few of the bit holsters out there but none seem to have worked for…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
As my next installment of birdhouse, I thought I'd go with a modern mid-century look and incorporate planters into it! So here it is! Print it! It's neat! Printing Instructions : Included are two versions of the roof. One without a…
This is an add-on for the Creality LD-002r resin printer to help drain the resin from the build plate (and model) after a print. UPDATE: I haven't personally tried it, but others in the comments have said that it also works for the…
Current logo of the American Football Team Pittsburgh Steelers
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A gridfinity tray for the Wurth AS 4 electric screwdriver 5701300024 Should also fit the bosch go screwdriver!
Mit dem Adapter kann man den Schlauch des Dewalt DXVCS002 Vorabscheiders direkt in den Parkside PPWD 30 B2 stecken. Der Schlauch des Parkside PPWD 30 B2 Staubsaugers kann direkt ohne Adapter auf den Eingang des Dewalt Vorabscheiders…
Included a copy of the OEM clip that requires supports and a simplified version that can be printed without support. Used 3 perimeters and solid infill Recommend PETG or ASA in order to better tolerate the heat.
Female locomotive driver originally designed for 009 narrow gauge model railways in 1:76. Re-scale if desired. Used colours: AMMO: Warm skin tone, Vallejo: Oxford blue, Sky grey, Red, black grey, Pale sand More free STL figurines to…
Upgrade your Subaru Impreza GD (2002) with this custom Side Marker Air Intake Cover . This 3D printable part replaces the stock side marker and adds an integrated hole to channel cool outside air directly toward your cold air intake.…
A coluna de som do meu carro avariou tive de fazer um adaptador Espero que gostem Se imprimir este objeto, por favor partilhe a sua impressão 3D ----- English version ( translate google )--- The speaker of my car broke down I had to make…
I lost mine and decided to recreate it, I got to the v3 version and it's practically ready even if I'm using glue to glue it properly, the interlocking system is not reproduced very faithfully because I don't have the original piece in my…
No screws required, 2 clamps are used instead to hold the 2 enclosure parts together and also serve as feet. Steps to assemble: 1. Place the board into the bottom of the enclosure. 2. Place the top of the enclosure over the bottom one. 3.…
Unleash the legendary terror of the deep with this 3D printable STL model of The Kraken. This highly detailed octopus sculpt is perfect for adding a formidable and awe-inspiring presence to your fantasy displays, tabletop adventures, or…
Greetings, Commanders! 🤖✨ It's time to take your 3D printing to the next level! Get ready for "The Ironclad Sentinel," a formidable robot design that seamlessly blends classic style with modern flair. This model is the latest creation…
Explore this modern and aesthetically pleasing 3D planter model from thangs.com, a top-notch platform for original 3D designs by creative designers. This model titled 'Modern Planter 002' is a design by Bearded Printer, it offers a unique…
Print 1 and 2. The join in the middle is on an angle, to prevent light leaks. The lid itself is quite thin and fits perfectly. File "full" is included just for reference. Category: 3D Printer Accessories
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A grease gun is a great tool for any workshop, and the Dualco Handheld Grease Gun (700231) is the tool for the job. Unfortunately, when placed upright on the workbench bench they tend to topple over as they are very top-heavy. So I…
Remixed from LH cover / endcap! RH cover / endcaps for Thule Omnistor 5002. Warning 2 different types included. Print with ABS, support yes (tree type), infill 30%, resolution 0.2.
Printed in PETG needs Supports on Outside Use only painted support ! !!no call supports only on Build Plate becouse you get also Support inside!!
Simple resin vat cover (in two pieces for now) for the Creality LD-002R SLA Printer. Print the part twice! Whole single piece version is included for remix purposes (wont fit due to clamps as is). Category: 3D Printer Accessories
This is a set of blocks that can be used to recreate the Ice Planet - Male , Ice Planet - Female (Doctor Kelvin) , and Ice Planet Chief (Commander Cold) figures at 500% scale. These were part of the Ice Planet 2002 subtheme under Classic…
Requirements: 'ZK-1002T' board * 1 M3x10 (or M3x5) Bolt * 4 Assembly: Remove bottom panel on 'ZK-1002T' board (keeping on screws) Use the four screws to put the board into the case. Optional: Multi material prints for 'Front Panel' and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. Tested in PETG 0.15 layer height…
So this is a RC CAR body version of my BMW 2002 toy-car with a 208 mm wheelbase which is exactly to scale to the original car. I'm also working on a RC chassis which will use this body; when ready the link will be here. If you have…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I use a Wyze vacuum to help keep my work (and 3D printing) area clean. This…
The X-Files - Special Agent Fox Mulder - 1993-2002
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
A wrench that you can use for your Hayward CL200 Series Chlorinator, make it's much easier to remove the cap. I printed this with PLA on a printer with a 300mm x 300mm bed. I had to rotate the print 45 degrees to get it to fit the bed. I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Monopoly organizer tray/inlay except with Avengers logos and labeling - fun! Summary of features from my Monopoly model: The design is intended to be used during game play as well as packed up inside the box after play. Just take the tray…
modelo escala generado con IA de un ford ka modelo 2002
A replacement battery cover for the Marantz RC002PMCD Amplifier remote. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Infill: 100% Notes: The overhangs are small enough to get away with no supports.…
A model of an East German firetruck knows as the lo its an robur 2002. The model is not 100% accurate but it's close enough. The wheel are not really turning so its just for looks and presenting. To assemble it u need 2 front wheels and 2…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) I have a Ridgid R4514 Pro 10 in. Jobsite Table Saw, on which I broke the little springed sliding retaining fingers off the fence slide while removing…
Recirculate the air inside the chamber using more activated carbon pellets than what came with the Creality LD002R resin printer. The original setup of the fan blows the fume out into the room which doesn't make a lick of sense. This…
![#0022 [Remix] Spool Holder and Drybox for Enclosure V2 - with alternate filament exit ports](https://media.printables.com/media/prints/198823/images/2017437_6c3f2b55-1b8e-4cef-a443-c683df1a5573/drybox-mod-assy.jpg)
![Display Stand for LEGO City Passenger Airplane 60367 / 60262 / 60104 / 60022 [last update 7.10.2023]](https://media.printables.com/media/prints/606587/images/4822115_a6e78fc1-c2a2-4011-bdf4-8805c8ccdeb6_e156ec04-83f1-4f46-b5e5-fd288b717e49/60367-5.jpg)
![KRIT YAMSASO [20250823002]](https://media.printables.com/media/prints/dcdc1888-3b97-4755-b33c-a3a68e6d5b1c/images/10513205_f0e149b6-dc74-4a1f-aa7d-d1caa88da711_c94e074d-013a-4696-ba34-f5ff86f9b036/002-1.png)
![#0028 [Remix] Monopoly Organizer Tray/Inlay - Avengers Edition "Shield HQ"](https://media.printables.com/media/prints/224949/images/2054328_8fda0b71-207e-4b25-81fc-e272366b050b/avengers-monopoly-1.jpg)
