Counting matching models…
After printing two of the Light Lotus Lamps remixed by Mou, i wanted to have two more smaller ones from glow in the dark filament. This remix scales the 175% Mou and Kim Andersen remix by 60% back to 105% of the Cheesus original. I found…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
08/2025: Updated 3D models for the screw and the center piece. The screw is now hollow! With this parts you can convert your empty Prusament spool to a Masterspool. I tested several other Prusament to Masterspool adaptors, but none of…
Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant
Remix for the Silica gel spool container from gdrag. https://www.prusaprinters.org/de/prints/65922-silica-gel-spool-container I realy like his design, It looks cool, is easy to print and fits nicely into a 750g / 800g spool (his 50mm…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
This is a hopper extension that fits Breville Barista espresso machines. I always found it annoying that I could not fit a full bag in my machine and have to constantly fill the hopper. This hopper is designed to extend the built in…
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
I made a model of the known BMW GS Commercial. You can customize it, make a Keychain , 3D Sticker or Badge. This is why i didn't put a hole for the keyring If you need the Stepfile just let me know.
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
Print 5 pieces of slats out in PETG or higher temperature resistant material (there are 5 on the plate in the .stl) and clip them together. It should be pretty obvious how they go together. Look at the photos if you can't figure it out.…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Abgewinkelter Trichter für das Vorschubgetriebe der Bernardo P600G. Ein O-Ring mit Innendurchmesser 17 mm und Schnurstärke 2,5 mm ist nicht unbedingt notwendig, hält den Trichter aber besser im Einfülloch bzw dichtet dieses ab. Ich habe…
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
Modified the original “Last Meters Mini-Spool” of AlexStinson to be even more small and improved some features. You have only a little bit left on the big 1kg spool and want to save space? This is for you! You have some 50g filaments…
This is an adaptor to fit smaller spools in my Bambu Lab AMS. I wanted something that didn't use up a lot of filament. Video of how to install: https://youtube.com/shorts/zUIok2ksIUY?feature=share Printer: Bambu Lab X1-Carbon Speed:…
This is a schwimming pool chlorine floater/dispenser for those big 200g pills. The print has two parts. No support needed. I used ABS and PETG, but Josef Prusa recommends ASA (better UV & chlorine resistance). 20230525: Uploaded V3 -…
Summary This is a model of a Mitsubishi 3000GT / GTO VR4 (Z16A / Gen 1) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts and spoiler ;-) After printing, the model can be assembled with…
500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…
the main k10 spool holder is a little fragile and often brakes with the use of the printer and taking it off the printer is a pain in the bullocks, so i made this spool holder to solve this problem. use the 3mf file if you have a k10 but…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … For (nearly?) all 200/250g spools Only two parts…
This adds weight to your spools so they stay in place when there is little filament left. Tested with many brands of filament spools like Prusa, Raise3d, Sunlu, Eryone, BambuLab, Wanhao, Flsun, Geeetech… Some spools like Geeetech need…
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.
The pool floater from @tstoegi_22008 is nice but I've a small pool and needed to limit the flow through the floater so I've simply added a ring which closes the holes. Printed with 0.3 layers and seam-aligned makes it “snappy”. See the…
Größe angepasst auf Deckelgröße 2023 (500g) Rundung 5mm eingefügt Radius eingefügt, sodass ein Drucken ohne Support möglich ist 250g Variante hinzugefügt, danke @ jot-entdecken.de
The boxer engine in the BMW R1200GS (and other models with the 1200 boxor motor, 1250 and maybe even the 1150) requires a special tool to open. I decided to draw this up and share it for others that may be missing the special tool…
Broke the right handguard bracket of my 2007 BMW R1200GS Didn't want to pay more shipping than the piece costs, so designed one myself. I've printed it horizontally where the single hole is situated. Printing it slow and warm. This…
Die Deckel sitzen fest auf der Dose. Druckvorschlag: 20% Infill, 0,2 mm Layer. Stützen werden nicht benötigt. Facebook: 3D Druck für praktische und nützliche Dinge
I required a tool to help flush the brake-fluid in my 2005 BMW R1200GS, without introducing air into the servo-assisted circuits. And I did not want to spend lots of money and time waiting for it to arrive. As far as I know, this funnel…
Oil Filter Wrench Removal Tool for Hiflo HF164/HF165/HF184 & BMW R1200 GS/Adventure - Chiave a tazza per filtro HIFLO HF 164 Bmw Gs R1200gs/Adventure Suitable for: HIFLO HF164 / HF165 / HF184 oil filter / Mahle OC306 Inner Diameter 76mm…
For over a year now, I've been signed up for Proto-Pasta's Endless Pastabilities which sends three 100g spools of Filaments every couple of months. I absolutely LOVE Proto-Pasta and look forward to getting these unique filament colors…
Remix designed from scratch using ideas from Billie Palmer and fredck. It works with the smaller 200g spools and saves on material and print time. See Billie Palmer's video on how to install…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … You need: 6 M3x30 screws 4 608 ball bearings 1 PC4-M10 quick…
UPDATED real size and sliced parts Dimention is real scale. I printed. i will wrap with carbon fiber All measurements are prepared with the real model. You can combine ready for printing. Wing Cap Added !!! 0.2 - 0.32 mm layer height PLA…
This is a remix based on the two models https://www.thingiverse.com/thing:3440524 (base for the thread) https://www.prusaprinters.org/de/prints/32359-prusa-lubricant-lm8uu-adaptor-bearing-pacifier (adaptor) For a detailed instruction for…
Tool holder for Slender Ball Pein Hammer 300 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 43.02mm H -…
Lid for can of dog food BRIT 400g & 800g Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Spectrum PETG Category: Pets
This is a remix of an easy to print sample spool. This is one of the spools out there with threads that have a bit of a steep overhang but still print cleanly. Changes include: thickened sides as they felt thin/breakable widened spool to…
Use it with the 100g mini spool ! Want to get the filament onto the spool quickly? Just grab your electric screwdriver and follow the instructions: Take your 100g mini spool. Look for the vertical line mark. Take the screw part with the…
I couldn't find any lids for larger Nutella jars online, so I made this one out of OuterSilent's one I found on Thingiverse by adjusting the size and threads. I wanted a tight fit so I can store kimchi and other liquids in the 680 and…
A simple adapter for a 500g weight to be held inside of a Bambu Labs reusable spool while in the AMS. The additional weight helps the AMS retract filament reliably when the spool gets light on filament. Here is a link to the weight used…
This model consists of three parts: case body, lid and lightguides. BOM The following items are needed for one case: 1x printed body 1 x printed lid 2x lightguides 2x M4x10 hexagon socket head cap screw(DIN 912) 1x SP11 Panel Mount…
My personal favorite car, the Mitsubishi GTO was the underdog sport-coupe of the 90s japanese car scene. With Honda, Mazda, Nissan, and Toyota all releasing their flagship sportscars, Mitsubishi needed to stick their foot into the door…
The lightest spare filament spool you can find online! All other versions take 100-150 grams of filament to make. TESTED PRINT PLUS THIS SPOOL NEEDS NO SCREWS OR GLUE TO CONNECT TWO PARTS . It has locking "mechanism" designed inside of…
Ich habe das ursprünglich auf Thingiverse von ChrisPHL veröffentlichte Modell etwas verändert: Die Orientierung wurde geändert und der Deckel wurde 1mm dünner gemacht, damit er flexibler ist. Ich habe den Deckel aus PP (Polypropylen)…
500gr version 200gr version here : https://www.printables.com/model/597230-solder-wire-spool-holder It doesn’t need support or anything else
Držák filamentu pro malé cívky 250g většinou flexi materiál. Určitě se bude hodit i na vzorky filamentů. Najde využití hlavně u tiskáren typu prusamini. Už mě nebavilo nasazovat špulku na vařečku. Držák se skládá z podstavce a stojánku,…
Simple low-profile one-piece wall mount for Lego Technic BMW R1200GS Motorbike kit. Needs two short Lego Technic Axles and one Lego Technic Pin (3673), which fix the model to the mount in three locations. No mods required to the model…
Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…
Bmw R1200GS - Keychain - Portachiavi - Porte Clès - 钥匙链 -Schlüsselanhänger Update 23/08/2025: added REV1 Versions Update 09/09/2025: added REV2 Versions Update 05/02/2026: added BMW R1200GS Keychain Type C Resize to adjust dimension If…
Community tested as I don't have the right spool and have designed this on request! “Scale to 99.95%” Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage…
Stereo brackets for mounting single or double din head units in the 1991-1999 3000GT/GTO. Designed to be printed flat with no supports. Supports will make your holes a bit more clean. Suggest you print these with a higher temp material as…
The lid can be printed in PLA. However, it is better to print the lids in a more temperature-resistant plastic, e.g. PETG. Lids made of PETG are more flexible and can be cleaned with hot water. Cleaning at reduced temperature (40°C) in…
3D Printing Guide: Decorative 1000g Gold Bar Introduction: This guide describes the 3D printing of a decorative 1000g gold bar, intended solely for decoration purposes. It's recommended to use a gold-colored filament to achieve a…
You can find 1 File Step and F3d fusion to modify or the two stl. I hope you like it
HOW TO THANK A DESIGNER? Post a make! If you like "universal" printer stuff, check out my printer stand/drawer system here: ⚙ Key Features of the spool adapter Sorry the first photo is messy, dang AI photo generator. But look at the other…
Hi, this is my first design of a tablet holder on a motorcycle. After several tries with the original crosscall support and having lost the tablet several times in the mud and the road XD I designed my own. Quite easy to print, just put…
Tool holder for Slender Ball Pein Hammer 500 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 120mm W - 45,02mm H -…
Innenmaße 11,6 x 11,6 x 5 cm Wandstärke 2 mm Dose und Deckel beschriftet Variante: Deckel beschriftet mit Löchern Dose für die Aufbewahrung angebrochener Nassfutterschalen (max. 300g). Geruchsschutz und Haltbarkeitsverlängerung. Dose und…
This model will fit a WD-40 300g bottle Printed on the Bambu Lab X1C. 0.4 nozzle No supports needed Prints in just over an hour Modelled in On Shape
Habe mir hier eine Pooldüse inkl. Chlortablettenhalter Konstruiert für 200g tabletten. Gedruckt wurde mit Asa Filament
The original file doesn't fit without sanding it down, so I shortened it. All of the accessories will still fit. Category: Vehicles
NO Supports Required. Print and go, I suggest petg to allow for a little flexibility. Print then insert 400g MAPP Gas bottle.
Coronal brain matrix for slicing brains of 300-600g rats -- If you'd like to support my work https://www.buymeacoffee.com/bitn
I recently bought a Sunlu refill set (4 x 500 grams) and couldn't find a reusable spool for it. So here's one. :) It's important that it's printed with (at least) PETG, not PLA. Otherwise, it won't be stable enough and will warp or break…
Ersatz Zahnrad für das originale Doppel-Zahnrad mit 120 - 127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Da man das originale Doppelzahnrad 120-127 nur für zöllige Gewinde benötigt, genügt das 120…
Its a big box of desiccant that fits into the Sunlu S4 filament dryer. Fits about 500g of desiccant. printed the small in PC CF and the big in PETG CF.
09.11.23: Version 2 veröffentlicht: mit Lasche zum einfacheren Öffnen und Schließen. Auch wenn diese Alu-Schalen nur 100g haben, unsere Katze frisst trotzdem nicht immer alles auf, weshalb sie immer eine halbe Schale bekommt. Damit der…
Frame for Samsung Active 3D Glasses Frame SSG-5100GB. No support. Just put glasses in the frame.
Tool holder for Slender Ball Pein Hammer 100 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 93mm W - 47,78mm H -…
Also added the STEP File
This is a bigger headlight dust cap for a BMW R1200GS 2004 model (confirmed but it should fit newer models as well) for LED conversion. Due to a heatsink or a mini-fan usually found on these types of bulbs, the original cap (part number…
The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…
This fits on the headlamp body of F700GS and F800GS. If you installed aftermarket LED bulbs that has a heatsink in the back these caps extend to allow room for them. High beam and Low beam caps are different. The fit on the High beam is…
3000GT Spoiler Lip Wing You can slice with 3D printer Slicer. Print Settings Rafts: Yes Category: Automotive
Adapter made with Fusion360 thinking on calibrated weights usage for the Bambu Labs AMS based on the adapter from elmaker Design This helps avoiding rewinding issues when finish printing or changing color putting more weight on the spool…
Bmw R1300GS Type R - Collection - Key chain - Portachiavi - Porte Clès - 钥匙链 - llavero Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets All trademarks, logos and brand names are the…
Attached is my interpretation of how the signal switch replacement. I lost mine over the night in January 2022. Determined, I designed out in maybe 3 hours with 4 iterations. I have been riding with this for over half a year, still not…
Mehrwegdeckel für 500g Joghurtbecher gut in TPU oder PC zu drucken kein Support nötig
Stand rest BMW for F800GS 2015 Print instructions I made it on 15 quick print with 50-60% and PLA.
500g Silica Gel box with sliding lid from mosave Two versions: 1. box as a single object 2. box apart to print it flat and glue together. Printer brand: Creality Printer: CR-10 Mini Rafts: No Support: No Resolution: 0.4 Infill: ~~…
Spacers to make it work for 500g spools
Kaychain for F800GS riders.
A small case for small SPDT switch SS12D00G3. No supports required, integrated sacrificial layer and built in clip.
I designed a non-destructive easy to mount phone holder for the 3S platform.YOU WILL NEED A MAGNETIC PHONE HOLDER TO MOUNT TO THE 3D PRINTED PART. The one in the image is a scosche one from Amazon. As always my files are completely free…
silhouette Mitsubishi 3000GT VR-4 + Logos los cuales componen de unas medidas de 51cm x 13cm x 3cm del coche, 5 x 4.2 x 2.5 el logotipo de Mitsubishi y de 15 x 4 x 2.5 el de 3000GT Para imprimir el coche es necesario cortarlo a la medida…
Mitsubishi 3000GT keychain Also works for Mitsubishi GTO, Dodge Stealth
Fill a Nutella Jar with water and a small amount of hydroponic nutrients. Fill the hole in the lid with a hydroponic growth medium (coconut coir, mineral wool, etc). It's also a good idea to let a small strip of cotton hang from the…
The holder is attached like a clamp to the factory reinforcement for mounting navigation on a BMW r1200GS motorcycle or any other tube with a diameter of 16 mm. By screwing in the M8 screw, we clamp the phone in the holder. The screw…
I wanted to create a full size, AMS compatible spool that doesn't need supports. Capacity wasn't an issue. Holds 500-600 grams of filament easily. *** If you use in AMS roll it this way to fit in the guide! ***
Protector para el faro principal de las BMW R1000GS con sus casquillos necesarios para el montaje. Subir el relleno bastante para que aunque sea flexible proteja de posibles impactos. Necesitarías para ensamblarlo: 1 tornillo superior…
We offer you a free adapter model for our 200-gram spools compatible with the Bambu Lab AMS. Oferujemy Państwu darmowy model adaptera pod nasze 200 gramowe szpule do Bambu Lab AMS.
I created this support to use my 2300gr (30 cm diameter) spools with my 3d printers. The spool that I use is from Formfutura but it is compatible with many others. Tested with many Bowden and Direct prints and it works great. It is…
I bought a BMW R1200GS and a Carpuride 702B Pro Carplay Display. The R1200GS was missing the BMW accessory mount so I could not use that. It also turns out that the Carpuride 702(B) Pro uses the mount for the BMW bracket or alternatively…
its a simple load cell holder to test your loadcell. This is for the 100 gram load cell.
slide-on cover for a 500g quark from Aldi South (Milsani) Printed in PLA and PETG without any brim or supports
Yes, yet another sample spool. I've tried many and liked the Proto-Pasta one best: Small inner diameter, to easily slip on the sample spools from my Proto-Pasta subscription. Large enough for 100g samples Works great with the roller-style…
Tool holder for Claw Hammer 600 Grams We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 120mm W - 45.02mm H - 48mm We design…
3000GT/STEALTH RHEOSTAT SURROUND Category: 3D Printing
Small spool for 100g filament. No glue required, just snap on.
Bmw R1300GS Old Style Logo - Key chain - Portachiavi - Porte Clès - 钥匙链 Type R2 Type R2A Type R3 Type R3A Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets 15/06/2024 added: Bmw…
FDM Printer settings ABS Filament 245c hotend 80c heatbed 65% to 100% in fill 65mms print speed this is a prototype and will get updated as more testing is done V3 now Available thickened the collar that centers the cultch and and the pin…
Bmw R1300GS - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…
Mitsubishi & Dodge 3000GT Stealt Lifter remover tool DXF thichness .065" or 1.3mm Category: Automotive
A wall mount for the BMW Vario top case Not a perfect model, but seems to fit. Will likely make additional changes if mine falls off the wall at some point. Scanned case using JMStudio and a Seal 3D. Wasn't a great scan, but got the job…
