Counting matching models…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
rotated the honeycomb pattern to make it easier to print
Hi. This is a remix of the original model. I hope you will like it. #### Changelog ####: Updated v.2 : different spatula holder (the hotend cleaning tools don't fit!!!!!) Updated v.3 : moved and fixed the unclog hotend cleaning tools…
I wanted to mount the sensor to the underside of a self, and the included magnetic mount doesn't allow it to rotate close enough to horizontal. So I designed this clip, which has allowances for the top button and the USB-C socket on the…
EN: This stand allows you to place the Sonoff SNZB-06P presence sensor on flat surfaces like shelves or cupboards without wall mounting. Uses the included magnetic plate for secure hold Slot for easy routing of the USB cable Recommended…
I've purchased a couple Sonoff SNZB-06P mmwave Zigbee sensors, but I didn't like that the size of the sensor was so large with the magnetic base. So I designed this back cover to make the device much smaller. It is possible to stick it…
🚀 Bring Your Sovol SV06 Series to 2025 Standards! This is a work-in-progress upgrade using the Zero Toolhead – the same one used on the Sovol Zero and SV08 MAX – adapted to fit the SV06 , SV06+ , and SV06 Ace . It’s lighter, cleaner, and…
I was replacing a Tuya sensor with a Sonoff SNZB-06P. I wanted to mount the sensor in ceiling, using the existing hole made by for the Tuya. This mount both accepts the Sonoff SNZB-06P, and cleanly uses the existing hole for the Tuya. If…
Print with a support for the USB hole. Requires a bit of glue to connect the two pieces.
This model is a free-hanging X axis camera mount for the Logitech C270 webcam on the SV06 and SV06 plus. It may be compatible with other printers but I have not tested it. You do need one screw bolt or dowel (personally I just used a…
Remix with added 2mm thickness to base layer.
^ Title! Category: Electronics
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for TL-SG108(PE) / SF1006P This bracket is designed specifically for the TL-SG108(PE) / SF1006P switch, offering a clean and secure fit in your 10-inch…
This is a remix to attach a Sonoff SNZB-06P Zigbee Human Presence Sensor to IKEA Skadis pegboards.
USE AT YOUR OWN RISK, STILL A WORK IN PROGRESS This is the first adapter to allow a sprite pro extruder to be installed on a Sovol sv06 plus. It may work for other such as sv06 reg. This adapter allows a sprite extruder to be added to the…
I printed the original but found it flexed too much under hand when being pressed, so I added a couple of support pillars to give rigidity. Prints nicely with 30% infill and will need supports. Align short end towards the bed.
This is the lower part of a Vortex V2 mounting bracket which allows the installation of a Sovol “ SV06Plus Vortex” parts cooling solution on a regular “ SV06” that is equipped with a “ SV06Plus Hotend” . I remixed that bracket to add a…
I wanted an unobtrusive right-angle mount for the Sonoff SNZB-06P presence sensor that kept some of the nice properties of the original included mount (magnetically adjustable), but could easily be attached at right-angles to the forward…
Flush mount adapter for the Sonoff SNZB-06P presence sensor designed for the Gira System 55 switch system. The design consists of: a modified Gira System 55 blind cover a slotted sensor sleeve with integrated cable routing The cable slot…
### The Problem The Sonoff SNZB-06P sits flat on its magnetic mount when placed on a shelf. In that position it can barely be tilted downwards, and it covers the room poorly. ### The Solution This stand holds the original magnetic mount…
In der Box des Sonoff SNZB-06P Präsenzmelders waren 3 Kabelhalterungen mit angebrachtem Klebestreifen enthalten. Da mir diese zu wenig waren, habe ich diese rekonstruiert.
Double mosfet board holder with ridges for holding the board in and also a couple of holes for cable ties, was just a quick remix of a single version for my needs but maybe handy if someone else wants to use it. These Mosfet control…
Holder (header jamb) for SNZB-06P I made a mount for the sensor because I was tired of using adhesive tape. Supports = Yes
Modèle 3d identique à celui d'origine de MWC6106PCB
Holder (header jamb) for SNZB-06P I made a mount for the sensor because I was tired of using adhesive tape. Supports = Yes
I was replacing a Tuya sensor with a Sonoff SNZB-06P. I wanted to mount the sensor in ceiling, using the existing hole made by for the Tuya. This mount both accepts the Sonoff SNZB-06P, and cleanly uses the existing hole for the Tuya. If…
I wanted an unobtrusive right-angle mount for the Sonoff SNZB-06P presence sensor that kept some of the nice properties of the original included mount (magnetically adjustable), but could easily be attached at right-angles to the forward…
Designed for the random banana connectors i had laying around. The stem is 5.8mm wide, I made the holes 6.2mm wide. The f3d file is included if yours are different. After printing it for the first time, the top broke of like the original…
This discrete, low-profile mount securely holds the Gledopto GL-C-006P Mini controller. It is specifically designed to ensure full, unobstructed access to all wiring terminals and control buttons while the unit is mounted. This model is…
Just purchased this https://www.shuter.com.tw/tw/product/oa/a4-106p The internal space is around 310x225x35, so your A4 drawer may just fit. The
During a remodel of my soldering area one thing led to another and rather than reinvent the soup plate i designed to remix Bryans DIN rail clip to add on a zigbee control unit in a slim configuration. To improve the usability and save…
A bike mount for the Ewa A106 Pro speaker. The smaller side where you mount it onto the bike is 35mm, feel free to ask for more sizes. Printing: 0.2 layer height 3-4 walls 100% infill No supports Skirt Hardware: 25mm wide velcro Assembly:…
