Counting matching models…
A simple stand to display any of the 3 versions of the Lego Back to the Future DeLorean. I printed the stand with PETG to prevent sagging over time. PLA might do fine as well.
Update : 7 May 2024 : Added V2.1, 20mm extra length to reach Bambu rear screw rod 14 April 2024 : Added 2 Caps ! V2.0 : A Simple Screw Rods Adapter for the Superlube 21030 Tube Fit all the 8mm OD 2mm spacing rods Easy to print without…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
Lego 10300 (Back to Future) stand, the individual parts must be glued together.
Requires 2 x Lego Connector Peg/Cross Axles and connects to the wall via a single screw. Prints in current orientation with no supports. Please note the layer lines are running in the direction of the stress forces so print with a strong…
Model should be printed in specified orientation without supports. Requires 2 x Lego Connector Peg/Cross Axles and requires 2 x screws to attach to a wall The storage easily fits all extra parts for the model Please note the layer lines…
Lego Back to the Future Delorean (10300) Stand This stand works better with LED kits by grabbing the outer portion of the rails. Also works well if you don't have an LED kit of course. 15 degree forward tilt, 5 degree side tilt Forward…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
This model is compatible with the lego system.
2023-01-03 Update: Ich habe eine 25,4 mm Version hinzugefügt. 2019-01-10 Update: Ich habe jetzt noch eine 35 mm Version hochgeladen. Das ist eine Fahrrad Halterung für das Garmin Edge 1030. Es muss nur noch die mitgelieferte…
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
I was looking for a way to just use a nozzle to grease carriages while still on the linear rail. Lots that allow you to grease round bearings, like the one that this was remixed from. So the smaller one fits in the hole, in a linear rail,…
This model is compatible with the lego system.
Bližší informace o modelu na stránkách Lega nebo v aplikaci LEGO Builder. Zkompletováno z různých zdrojů na internetu, popřípadě navrženo ve FreeCadu.
This model is compatible with the lego system.
This model is compatible with the lego system.
A project inspired by this forum topic , it allows you to use a standard USB power source with a Garmin Flush Out-front mount, Triathlon mount and probably also mounts from other brands that are compatible with the Garmin Flush Out-front…
I bought a used GPU for my arcade build at a price that I couldn't pass up. The only issue is that is was missing the Low Profile Bracket with it. Fits this GPU Graphics Card: BTO GeForce GT 1030 2GB GDDR5 Low Profile Graphics Card This…
Print in PETG using lots of walls and strong infill patterns. Then do a stress test trying to break the mount. If it doesn't budge, carefully use it on a bike.
This case I design houses the Aurora Lily58 from splitkb.com and has space for a 103040 Li-Po battery with 1200mAh. You will need 12mm standoff from the Plate, through the PCB to have enough space to clear the battery. I attached the…
I made a template insert for the Pelican 1030 case. Mocked up in Tinkercad, please modify for you own use. I use my Pelican 1030 for my darts storage, so I will be lopping off much of this template and adding holes in the side to put my…
These are the End Caps I created for the aluminum fence extrusion I used on my mitersaw bench. They are a nice tight fit so they won't fall out. This extrusion is 1" x 3" and it is available from the following link…
The male mount of my Garmin Edge 1030 broke after some years and it did not hold it securely anymore. This is an adapter that goes over the original mount. I used PLA and some 3D glue to bond it together good.
Created an insert that would fit a Pelican 1030 micro case to contain drugs securely. I made a couple of versions - one where the 10ml vials are laying flat and another where they stand vertically.
Lego 10300 (Back to Future) stand. I printed the stand with PETG to prevent sagging over time.
I remixed RevHazlett famous lead screw greaser to accommodate my printers 10mm lead screws, instead of the regular 8mm, since I couldn't find one. this is designed to fit the superlube 21030 3oz squeeze bottle The cap is the same as the…
Custom wheels and tires for the 10304 Lego Camaro Z28 to replace the stock ones with a period correct setup. You have a choice of either unmarked or lettered tires with the "Goodyear Eagle" insignia. It's a staggered tire setup with a…
The Technoline WL1030 air quality monitor just has a table stand. But we wanted to hang it to the wall near the power plug. So I designed this wall holder. The holder consists of 2 parts: a wall plate and a wall holder. The wall plate can…
I made this in TinkerCAD for a project car I used to have before I lost it to a flood. I made these in TPU to get the hood back flush. GM no longer makes these and you can find some third party versions that may or may not work. I just…
Because i need to store adapters apart from grease tube… This part has the same screw thread as the 21030 Superlube tube and can be used to plug accessories for storage. (Adapter for the xl coupler is for illustration only).…
The tie-down on my O'Connor 1030 does not reach the bottom thread when used with the Dana Dolly. This is an alternative tie-down. There's no need to use the bottom dana dolly washer. You just need an M10 x 1.5 nut. I used 15% detail and…
Das Problem Der originale Feststellknopf des De'Longhi CGH1030D Grills hat eine bekannte Schwachstelle: Die kleinen Ecken des Rastmechanismus nutzen sich mit der Zeit ab ("werden dull") oder die Schraubdome im Inneren brechen. Das…
To test fit electronics in enclosure, but please note size might not be 100% correct so don't blame me if anything goes wrong. OpenScad model included, should be easily change-able for other similar enclosures. Not meant for printing,…
You need 4 pcs M3x4x4 heat-set inserts and 4 pcs M3x6mm countersunk screws. PS: added version for 103048 battery and Baofeng UV-5R clip/
I wanted to use the YR-1030 internal resistance measuring tool with my LiPo batteries. For this you need to access the cells directly, which is impossible using the small balancer connector. Therefore i designed this adapter. You can then…
Pelican 1030 Cover Narcan Holder with retention
The official assembly instructions make you solder the battery directly to the PCB. This wasn't ideal in my opinion so I designed a little thingamajig that lets you connect the battery via the original terminals. It also has the upside…
Print recommendations (all should be included in the .3mf file): Prusament PLA Jet Black Print with the aesthetic face up Use organic supports as they come off very well
Meinem Nachbarn bricht regelmäßig der Griff von seinem Heki-Rollo im Wohnwagen ab. Das Teil gibt es wohl kaum irgendwo zu kaufen und wenn, dann nur für recht viel Geld in einem Teileset, von dem man nur den Griff braucht. Ich habe schnell…
I had a GT210 but only had a Low Profile bracket for it, So I made this.
4-Fluoro-1,3-dihydroxybenzene (C6H5FO2, CAS 103068-41-3) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. A one-colour…
I remixed RevHazlett famous lead screw greaser to accommodate my printers 10mm lead screws, instead of the regular 8mm, since I couldn't find one. this is designed to fit the superlube 21030 3oz squeeze bottle The cap is the same as the…
Das Problem Der originale Feststellknopf des De'Longhi CGH1030D Grills hat eine bekannte Schwachstelle: Die kleinen Ecken des Rastmechanismus nutzen sich mit der Zeit ab ("werden dull") oder die Schraubdome im Inneren brechen. Das…
A somewhat old piece for Playmobil (we were missing one for a farm). The model can be found and copied here: https://cad.onshape.com/documents/fed9438538f03a55f9077c82/w/6368ac5b076544e8b73ea047/e/ab14dce5e4496b1a0e742951
Measuring a large batch of 18650 cells for a powerwall or battery pack project can be tedious. Holding the probes manually often leads to inconsistent readings due to varying hand pressure and shaky contacts. I designed this fixture to…
Self holding ESC support for slim F5J motors. 4.5 grams! Please print with ASA, GreenTecPro or PC for thermal ressistance!
This model is compatible with the lego system.
![Garmin Edge 1030 Bike Mount [Fahrrad Halterung]](https://media.printables.com/media/prints/10390/images/86293_44a7b17c-f483-4dda-a10c-7fea02d85520/unbenannt1_10390.jpg)
