Counting matching models…
Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
Anglegrinder holder for the modular wallmount. 2 pieces, you'll need m4x15 screws to put it together. Baseplate and description: https://www.printables.com/model/202771-modular-wallmount-system-for-various-powertools
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant
Adds around 25mm to the height of your couch to allow a Roomba to fit under it. Pla will deform over time. petg/abs
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
115mm Angle grinder dust cover Bosch GWS
Made for my Ryobi 115mm cordless angle grinder but I imagine it should work with most 115mm or smaller grinders. I've also made extra parts to hold the handle and the wrench. All parts mounted with 10G x 30mm wood screws into standard…
What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…
I wanted a holder for some cutoff discs for my angle grinder. I couldn't find a container that would fit on my print bed (125mmx125mm) despite the fact that my angle grinder takes 115mm discs. So I had to design one. To reduce the size,…
to glue on the baseplate of the anglegrinder holder from my modular wallmount system for Powertools. https://www.printables.com/social/130907-godnamedthor/collections/168689
Proposed Print layout and support
Proper elipse guides are still very expensive and hard to find. So I decided to design and make my own. Idealy you want to print them in transparent filament to help you position the elipses better, but it works even with non-transparent…
A simple measuring gauge for European lobster, designed according to the Norwegian regulations introduced for the 2026 lobster season. Measure the carapace from the rear edge of the eye socket to the rear edge of the carapace along the…
Duschwannenablaufdeckel 115mm mit 3 Punktbefestigung. Der Deckel wir wegen der Belastung mit mindestens 50% Füllung gedruckt
This remix has a wide opening so it doesn't need any support, and the mounting bracket is wider to make it easier to screw to the wall.
Rapidevolution is line of printable 1S FPV frames. The Re-115 Lite is a printable, 3", 1S Toothpick frame, focused on lightweight performance, and "take what you can get" durability. With a clean build, it should fly nicely on Betaflight…
This model can hold a 125mm duct screen on an JasMiner X16Q.
Die Absauganlage besitzt einen Rohrinnendurchmesser von 100 mm und der Dickenhobel von 115 mm. Der Adapter ist so konisch konzipiert, das kleinere Durchmesserdifferenzen ausgeglichen werden und somit ein perfekter Sitz gewährleistet ist.…
Rapidevolution is line of printable 1S FPV frames. The Re-115 is a printable, 3", 1S Toothpick frame, focused on lightweight performance, and "take what you can get" durability. With a clean build, it should fly nicely on Betaflight…
Rapidevolution is line of printable 1S FPV frames. The Re-115 Lite EX is a printable, 3", 1S Toothpick frame, focused on lightweight performance, and "take what you can get" durability. It weighs the same or less than the 1.5mm thick…
True to the name, Rapidevolution, here is v2, right on the heels of the original. The Re115 v2 is true improvement on the previous version, with a more aerodynamic beam design for the arms that is also noticibly stiffer, resulting in…
Damit die Schleifpapierrollen nicht immer offen rumliegen und ständig die Kanten Beschädigt sind habe ich mir diese Box gedruckt um meine rollen sauber verstauen zu können.
Store Make ups or skin cares 115mm x 25mm x 240mm
Hier stelle ich ein Filtergehäuse für einen Aktivkohlefilter für den Elegoo Centauri Carbon zur Verfügung. Der Aktivkohlefilter hat die Maße: 115mm x 115mm x 20mm. Das Gehäuse habe ich 1mm größer konstruiert. Der Link für den Filter ist…
This is designed for a Medusa with a Z spacing of 115mm. Feel free to chop it up and make it yours however you see fit.
swift rowing hatch cover 115mm, I will add photos later sorry
Angle grinder 115mm holder/mount. Printed in abs Infill 20% Print with supports 1h30 print Print the spacers only if you need more depth.
My spools (3DJake) are approx. 70mm wide, so I changed the design from 60mm (with 2 turns) to 2.5 turns. The SHORT version is 160mm long instead of 200mm. The 100mm and 115mm version have the middle of the groove (aka the inner flank of…
For this print you need to use a slow speed at the begining,after a few cm you can raise the speed,i use brim and support
As I was searching for a display mount I found this Voron Displaymount for 5 inch . I realized I liked it very much but the mounting hole spacing wasn't the same as my display. so I split the model, extended the middle part and here's a…
A bowl holder for pet food bowls. Sits on raised feet. One of the models has built-in supports. Designed for 4.5in wide bowls (115mm). Category: Pets
This model works with Rick Tucker's system and is primarily a remix of Joshua Wentworth's Window Seal for 3-Inch Exhaust Duct. I made the funnel / throat portion take up much less depth. 35mm total from the face of the filler board, vs 90…
Die Aufsteckhilfe kann mit dem Griff, oder ohne auch an eine Wand geschraubt werden und eine ohne mehrere Scheiben aufnehmen. Drucker Prusa MK4 Material PLA Infill 15% The attaching aid can be screwed to a wall with the handle or without…
The Trak Racer TR80 DD mount does not fit 115mm sized servo motors. This adapter allows a 115mm motor to be mounted securely with a 150mm motor bolt pattern. Designed for SEM HR115 servo motors. Press fits into the opening of the TR80…
This is a small case to provide some protection to a small solar panel that measures 70x115mm. I figured I'd upload it in case it's useful to others. You can hot glue, or use double sided tape to secure the panel inside. If your panel is…
🔵Picture Frame🔵 The frame can be set in portrait or landscape, photo size is 150x115mm but there is a small deviation of 0.15, so that the photo fits everyone there. Regardless of the material. ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for…
To be printed on its side If you will print this model, please post a make. Thanks! P.S. Thinner remix exist to fit US Skadis: https://www.printables.com/model/975385-skadis-hook-115mm-na-skadis
This is designed for a Medusa with a Z spacing of 115mm. Feel free to chop it up and make it yours however you see fit.
swift rowing hatch cover 115mm, I will add photos later sorry
Mounting for 10lb or 4.5" diameter fire extinguishers. The extinguisher snaps into the top clip and rests on the base. Print Settings Supports: No Notes: Print the bottom fairly solid near the wall as that is what is doing most of the…
Stepper Motor Nema 23 length 41-115mm shaft D8
Luftgitter für Belüftung 115mm --------------- ENGLISH -------------- Air grid ventilation 115mm Print Settings: Printer : Anycubic i3 Mega S Print time : 5 h 20 min. Filament : PLA or ABS Resolution: 0.2 mm Infill: 15% Brim : No Rafts:…
Sovol SV05 - Power Supply Cover for Standard 215mm x 115mm x 50mm power supply I had trouble with my printer reaching 245 degrees so I replaced the power supply with a 480W. The original power supply is thinner than most that are readily…
When you drop your wife's favorite mirror swivel stand and break it, print her a new one.
Update 2023-12-10: I added a nice 3-fold stand to this storage system. It has the same bayonet closure as the jars, so that they stand securely. Please download here . This is the 115mm jar of my new “ Stackable Jars ” storage system. You…
This is a filtering cover for a 115x115mm square drain. Print instructions Use 100% infill or enough horizontal layers to make it solid.
This extended version offers a clamping length of 115mm and can be used for flour and sugar bags. Prints nicely in PETG.
A little fix to the original model to work with North American Skadis boards. For some reason the original model was set to 5.2mm width which would not fit the Skadis without adjusting it. This model is sized correctly for the North…
