Counting matching models…
Plug to hold the cassette together along with the lockring. Can be used front either end. This model is designed for Sram/Shimano/Sunrace 11spd. Will work with 10spd but may be loose.
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
english home battery case design for sjrc f11s is compatible with other f11 models, i recommend printing the main body vertically and the side flaps putting print holders is the only place needed project for those who want to mount their…
This is a replacement steerin drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Steering Bracket Roller - PVXH011SA This is #12 on this diagram…
This is a replacement part for Hayward PVXH011SA. Would recommend using ASA or ABS, and since this is a tall and skinny print, would recommend printing with a brim as well as printing slowly especially as the top part is printing things…
As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function perfect and is easy to install and print. I used M3x16 screws to mount the holder and the shock tower to the body. For…
Wanted a place to keep both the brush and the remote for my Eufy RoboVac 11s since I use them almost every day. It could be mounted to a wall with command strips, or drill some holes in it to hang it on nails. Print instructions Category:…
Remixed for 11-speed from the original by CinciJeff : Jockey wheel scraper for Shimano 12-speed chain
Our Eufy 11s vacuum needed a sweeper gear. There are a few models already, but they use a different gear pitch with 46 teeth. Ours needed 38 teeth so I designed a new one. I printed with a 0.2 mm nozzle with PLA+. Other nozzles should…
Each wheel is printed in two parts from PA or POM (original part material) and glued/bonded to one another with a help of screws tapped into the opposite part. Each wheel requires 606 bearing (17x6x6(h)). Please check exact pocket…
für unser lokales DRK haben wir einen Halter entwickelt, welcher Frontblitzer im Kühlergrill fixiert. Wichtig Hiebei ist ein sicherer halt und eine einfache Montage ohne Fachkentnisse. Verwendetes Material Prusament PETG mit 30% infill.…
Put your eufy 11s remote on your skadis pegbord
A wall charger for the Eufy 11S stick vacuum cleaner. Needs two tension springs ~45mm x 5mmØ. Also a pair of m3 x 8mm and m3 x 12mm bolts, and a square nut and an m3 x 8mm for the cable cover.
This is a bracket to hold a 60x25mm fan on top of the CPU heatsink on a Supermicro M11SDV-8C-LN4F motherboard (or any similar model with the same heatsink dimensions). This is designed so that the fan is "floating" above the heatsink, and…
Eufy Robo Vac 11s Rollengetriebe
This design is a fish finder mount on a Hobbie iTrek 11 or Mirage i11s ( old name) it's design to for a Garmin STRIKER 5cv but can work with any Garmin fish finder GT20-TM For other fish finder, you just need to design a different…
The Supermicro M11SDV-8C-LN4F motherboard has a low-power 30W EPYC 3201 and ships with a passive heatsink, but under load the heatsink does get uncomfortably hot. Adding even a tiny 40mm Noctua Fan is enough to keep the temperatures under…
Code used: Hairizer 1.2 By Magonegro (04-NOV-2020) from thingiverse. The code was used to generate the bristles. This file isn't perfect, but it is usable. I have uploaded some minor improvements, definitely more to do. Updated this file…
Pictured with filter door printed with PLA and gasket with TPU. Helpful to use minimal support along hidge edge.
The front wheel of my Eufy Robovac broke. After trying and failing other fixes, I designed this replacement. It doesn't rotate, but the Eufy glides without problems on this new piece. THE MODEL: The model is designed to be the same height…
I purchased a SuperMicro X11SAE-F from eBay that came without the io shield. I found a model for the SuperMicro X11SAE on MakerWorld and remixed it to accommodate my needs. Printed in PETG-HF with a .6mm HF nozzle.
IO Shield - Supermicro SC510-203B - X11SCM-F
This is a replacement screen holder adapter for the FeelWORLD LUT11S monitor . I lost one of the original adapters, so I designed a replacement myself. The part was measured from the remaining original (black) adapter and modeled in…
I have printed and install it but with an earlier version, I use nylon but petg work probably fine just need to add support at the bottom and need to remove the already existed support made in freecad
This is a dial guard for the Baofeng G11S GMRS hand held radio. Print as oriented. I printed in TPU with default settings and glued in place with thick/gap filling super glue. This is designed to have space for gloves as well to actuate…
I purchased a SuperMicro X11SAE-F from eBay that came without the io shield. I found a model for the SuperMicro X11SAE on MakerWorld and remixed it to accommodate my needs. Printed in PETG-HF with a .6mm HF nozzle.
Remixed for 11-speed from the original by CinciJeff : Jockey wheel scraper for Shimano 12-speed chain
A very basic design that converts an empty 2DIN/Double DIN frame into a useful storage cubby. This was designed to be installed without a metal radio cage in place, purely just the black dash trim. It has a hole in the corner of each…
This is a heatsink fan clip that can be used with the Supermicro X11SDV Xeon D passive heatsink with a Noctua 80mm fan and a standard 80mm fan grill. Print instructions Printed with ASA, 20% infill, and draft shield
