Counting matching models…
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed. label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one,…
This is a 3x4 gridfinity usb cable organzier for 12 x cables . The diameter per cable is approx. 12mm. Have fun and don't forget to post your makes :-) Check out my other designs and follow me for more.
I needed a game case holder for 14 PS4 cases but only found designs to hold 10/12 cases on here & Thingiverse. I didn't want to print multiples or consume the time/material required for existing case designs, so I made my own. This holder…
I removed the gap in the switch cap, so it's easy to print upside down.
Search the web, and could not find a functional bearing with this dimensions. So I create one in a simple way and for fast print. The bearing has no rolls inside. The inner ring has a tap, so it could not fall out. I printed the bearing…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
I got tired of my bits rolling around everywhere, so I designed this simple storage box. It holds 60 bits in a 12×5 layout and keeps them neat, secure, and easy to grab. Prints in place – no assembly or extra hardware needed Nice snug fit…
Simple M12x1,5 Cable Holder for Umbilical with Can-Bus. BOM: 1x M3x20 SHCS 1x M3x8 SHCS 2x Heat-Set Insert M3x5x4
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…
I liked the idea of using these mushroom shelves to use as fridge magnets, but I prefer to use 12x3mm magnets, so I modeled some. I used the origional models as a starting point, repaired, reoriented them, then added the holes. The holes…
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
I finally learned how to make proper knurling. I plan to make multiple sizes just because I enjoy making them. This actually make great and silent fidgets. :) After a test print, I decided to take the knurling all the way to a point.…
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
M12x1.5 nut M12 cable glands need a 17mm wrench for the nut and a 15mm wrench for the gland itself. If you're operating in a tight space, a 15mm nut might help! If you need a specific size and you're not into FreeCAD that much, let me…
Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props and more!Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props, the…
Holds 12x AA batteries. Prints upside down (load batteries from top) without supports. Note: this will NOT fit Duracell AA batteries. If you want to use Duracell (or similar), you'll have to scale the X and Y down to 97%, but not the Z.…
1U 12x Keystone ports with or without shelf to match the Modular 10" inch server rack project I recommend printing the test piece first to ensure your keystone modules fit well, as this was designed to fit a CCS brand module.
I needed to keep several SD Cards and Micro SD Card adapters at hand, so I came up with this little holder with 12 slots. The slanted side of the SD cards goes towards the chamfered side.
Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
This spacer is designed to maximize airflow with minimal noise impact, almost no added noise compared to running the fan unrestricted. I recommend using at least the 20mm version to ensure enough clearance for optimal airflow. 120mm: •…
A Gridfinity USB Stick holder that holds 12 USB-A sticks and is 1x2 bins big. It doesn't have any magnet or screw holes as I don't use them and it makes printing easier and faster.
Case to store 30ml bacteriostatic water 12 spots
CanBus Umbilical m12X1.5 for SB2040 EBB36 Holder for cable gland M12x1.5 use m3x20
Requested by a grad student inspired by the Romero Lab at UCSD.
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
Model of the Noctua A12x25 Model for folk wanting to enter the Major Hardware Fan Show Down. STL, STEP and F3D files are included.
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
Prints upside down (load batteries from top) without supports. So far confirmed to fit the following batteries without modification: Amazon Basics Eneloop Duracell ProCell
A 1x1 Gridfinity module that holds 12 LR44 batteries.
printed using 100% infill
Need a base plate but don’t want to go full size? This smaller LEGO DUPLO-compatible version might be just what you’re looking for. Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 %…
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
These covers can be used to make the beige Noctua-AF12x25 fans blend better into a custom pc build. There are versions for a single fan a full cover for radiators using 120 mm fans - the design is modular a front cover for radiators using…
Leave a comment if you'd like another file type for this model.
Sharpie recommends storing paint pens tip-up. Fits Sharpie, Decocolor, and the pens I got from AliExpress.
Einfacher Ständer für externe USB Festplatten. Unten am Boden kann man kleine Plättchen aus Gummi oder Filz anbringen. Für eine maximale Festplattengröße von 110 mm Länge und 22mm Dicke. Versionen, für 4, 5 oder 6 Festplatten. Gedruckt…
Tlumič výstřelu s vnitřním závitem M12x1
This is a remixed version of the original simple & lightweight design with primary focus to minimize print time & material consumption through optimized geometry. The width of each slot has been reduced by approx. 2 mm for the slightly…
Pictures are of V1 STL files. I've printed but still need to solder the V2 STLs based lamp. V2 lamp uses 5-12 LED strips placed horizontally on the lamp - significantly reduces the amount of soldering! As well, the button has been moved…
A mini sized shift knob I designed for use in my Toyota MR2 roadster. This should be compatible with most older Toyotas and cars without a reverse lift mechanism on the shifter. Only exception I know of should be the GT86 / BRZ. This…
Perfect fit for Neodymium 12x2mm magnets https://www.amazon.es/gp/product/B008U9SDI4 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Animals
Collection of screws (ISO 4762 / DIN 912) including : M12x 12, 16, 20, 25, 30, ,35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
I needed a simple way to mount 12mm pushbutton for a recent project ( foot switch ), so I made this. There are 2 versions (with 2 screw holes and 4 screw holes), each for m1.6 , m2 and m3 screws. I printed mine out of PLA and didn’t have…
4 Shift Knob variants with various textures. All M12x1.5 threading. Tested fitment on my MK3 Jetta and MK1 Jetta. May need adjustment or different threads for other vehicles. Print in ABS or another filament that can stand temperatures.…
Several years back, I built a modified golf cart with an ATV drivetrain/suspension and I originally used a Hurst pistol grip shift knob I had on my Mustang. I wanted to change it up to something more comfortable for the seating position…
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
Baseplates for Gridfinity, with that satisfying magnetic snap, significantly thinner and cheaper than traditional magnet bases. Based on the proven Gridfinity Extended “Efficient Magnetic Base”, with a number of improvements: Uses 5x1mm…
Venturi nozzle for compressor adapter with M12x1.25 threading I was able to print it without supports on a MK3S+.
Collection of set screws (ISO 4028 / DIN 916) including : M12x 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Hello, I have built a new version of my hard disk shelf. First of all I would like to thank @JorySharr_2146962 for the idea and the constructive criticism during the design. A total of 12 hard disks can now be installed. These are locked…
Simple 12x12 Multiplication chart. I haven't printed it but I have a 10x10 that its printed already. it can be printed in 2 colors. 10x10 Multiplication chart https://www.prusaprinters.org/prints/26628
Simple stand for up to 12 darts. There are two versions included: All-in-one: Just one part printed with a material of your choice. Two part version with a bottom part printed with TPU (or any other flexible filament of your choice) and a…
If you like my work please consider buying me a coffee! This is a showstand for 8 or 12 Gameboy cartridges. Gameboy, Gameboy Color and Gameboy Advance games will fit. The 12x version won't fit on my printer so i have only tested the 8x…
Simple holder for lathe tools 12x12mm and torx keys
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
The original stubby mount for an M12 cable gland has an M12x1.75mm pitch. The CNLinko connectors have M12x1.25mm pitch so I re-modelled the mount to have an M12x1.25 thread. CNLinko waterproof connectors in various pin configurations can…
This is a remixed version of the original simple & lightweight design with primary focus to minimize print time & material consumption through optimized geometry. It's a longer variant that allows for lengthwise storage and is more…
PC Intake turbo compresor alternative turbine for Noctua A12x25 made for MajorHardvare's fan competition, the exhaust pipes are for better spreed of air in test radiator, they are not intended to use in pc only the turbine and front cover…
I made a sturdy rack to hold 144 prismacolor pencils while protecting them a bit too. Doesn't use too much filament.
Needed adapters for my new gravel bike. Already had them for my boost spacing mountain bike. PETG for temperature and exposure 100% infill print upside down
Use heated inserts (on motor side) to mount this adapter to your motor with 16x16 moutingholes and mount it to your frame with 12x12mm mountingholes. I used M2 inserts and screws to mount everything to the frame and M3 screws for mounting…
This is a remix from Doupem on Thingiverse https://www.thingiverse.com/thing:3545704
Electric motor fan, ventilator 12x105mm
Installed a weighted round shift knob. If you have a lift up reverse lockout ring this adapter will clean up the transition between your new round shift knob and your OEM lift up ring. After several models I found the M12x1.25 hole was…
Lightweight baseplate for Gridfinity to use with one 12x2 mm magnet. Printed with a 0.6mm nozzle at 0.3mm layers. The fusion file is included so you can make the grid as big as you want, I included a few that I made for personal use. Here…
Simple shiftknob to use in any vehicle/sim racing setup with M12x1.5 threads. Print with as many walls as possible to make it stiff and with the threaded hole towards the bed. If you want it to be havy you can add infill.
Collection of screws (ISO 10642 / DIN 7991) including : M12x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Zweite Auflage, da die erste recht gut ankam. Anhänger zum beschriften mit DYMO Klebestreifen (12 mm breite) um Schlüssel oder andere Sachen zu kennzeichnen. Ich habe die Außenkontur etwas verrundet und 2 weitere Größen hinzugefügt (20 u.…
This is an adapter for Quick Release forks to Thru Axle mounts. I have Kuat Dirtbag Thru Axle mount that I use with my Disc brake bikes. I wanted to be able to mount a Quick Release bike so I made this adapter that fits inside the Thru…
Govee Hygrometer (H5075) Magnetic Mount (12x3mm Magnets) For mounting Bluetooth connected Hygrometer in printer, drybox, etc. H5075 keeps history so you can keep track of dry box humidity and temperatures over time. No support Press the…
Fan mount for a 120mm fan above the psu/graphics card.
Object Description: This suction nozzle fits a Dyson vacuum cleaner hose. Outer diameter of the tip: 12mm, Tip length: appr. 75mm. Connection outer diameter to the suction hose: 34mm. If you need a nozzle with different sizes, don't…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
Easy to print. Added two versions with 12 pieces in two different sizes. 6.5 and 6.6 indicates the distance between the flat sides of the bit. Means 6.5 is a tighter fit than 6.6. As an addon to : Container box, 80x120x20mm, V2, pallet…
casing for generic 12mm x 12mm tactile switch. requires hot glue to secure two parts of casing.
Awesomatix A12X Fan holder. Perfekt sit with IP 8800 Lipo
Gridfinity Battery bin, can store 12 AAA and 6 AA Batteries! Switch colour at Layer 104 if you want to colour code Created with kennetek's awesome openSCAD remodel https://github.com/kennetek/gridfinity-rebuilt-openscad Gridfinity by Zack…
The fitting takes 6mm tubing but the F360 model can be modified to take any tubing. Print with 0.1mm layers, 0.4mm nozzle, supports, and fill the entire model with all walls. (6 walls can work)
This is a great design but needed different sizes. This model will fit the Grizzly G4003 12x36 and should fit the 14x40 gearhead lathe as well. There are 2 models available as the lathe comes with 2 chuck keys. One measures 16mm diameter…
Jonsbo N6 Nas Case Front Fan Mount For 120x15 Fan 25 Percent Infill, ( Tested with 15 and it was still plenty strong ) Needed Parts 4 m3x12 Bolts 4 m3 Nuts 2 Magnets And Screws From Old Front Plate 2 120mm by 15mm Thick Fans 8 Course…
This is an adapter to mount a noctua 120mm fan (each version should, e.g. for me NF-A12x25 fan) to a minisforum um 790 pro. This allows for super silent operation. For the assembly first unplug the power supply on your minisforum. Then…
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
This is a drawer I designed for small parts like screws and electrical components for arduino It has various configurations of boxes for your needs ( with 9,6,3,2 and 1 compartments) Needs no supports 112x112x29mm inner box size takes…
This is a remixed version of the original simple & lightweight design with primary focus to minimize print time & material consumption through optimized geometry. The width of each slot has been reduced by approx. 2 mm for the slightly…
Repair Lock Pin for Honda Transalp 650 M12x45mm This 3D model is a direct replacement for the original fairing locking pins used on the Honda Transalp 650. It is specifically designed to repair or replace the side panel fasteners, which…
This is my design for a 91mm tall by 84mm diameter hexagon patterned WS2812B RGB LED array, touch controlled, lamp. The LED array is 5 horizontal strips of 12 WS2812B RGB LEDs at 60 LEDs/m. I've used vase mode printing on the outer shell…
This thing is a quick-release (or snap-on) adapter to mount a Bushnell 12x25 foldable binocular to a standard quarter inch tripod mount. For a binocular with a 12x magnification it makes a huge difference to prevent it from shaking by…
Onshape model: https://cad.onshape.com/documents/6c72eb96eae109c4e6a20f9a/w/54eec85b32cf1de8af3d20ba/e/653f98a3a91ca070ed2c61d3?renderMode=0&uiState=65edd96511629276fdd494db
A simple holder to store your lathe tools including the following. 12mm Boring Bars 8mm Boring Bars 12x12 Lathe Tooling 16x16 Boring Bar Sleeve Carbide Tooling Wrenches
You can organize your cutlery.
Buttons that fits in Voron's hexagonal skirt holes. 12x12mm through hole buttons are used. I think I used these . Connect them to free GPIO pins. The Raspberry Pi usually have a few free ones if the control board is maxed out. One cable…
Kiste für 12x AA Batterie - Maße: 65x45x25mm Diese Version ist neu gezeichnet und für 0.4er Nozzeln bzw. Layerbreite ausgelegt. 2 Wände reichen hier komplett aus. Keine Materialverschwendung und keine langen Druckzeiten durch vermeiden…
Simple stand for up to 12 darts (smaller version). There are two versions included: All-in-one: Just one part printed with a material of your choice. Two part version with a bottom part printed with TPU (or any other flexible filament of…
all information concerning the original model and componants to buy could be found in cjbaar github. https://github.com/cjbaar/Prusa-Firmware-MMU-12x it has to be mounted taking into account mmu2 and MMU3 prusa assembly procedures. i…
Overview: This is carrier for eight Parkside X20V batteries. It is useful for storing and transporting batteries. The model is lightweight, strong, and easy to print, with tilted slots for quick battery insertion and removal. The carrier…
Umbau teile um einen Wera Rapidaptor Bithalter im Bosch GFA 12 X zu verbauen. Hierzu wird der Sprengring auf der Geräteseite entfernt und der Bithalter nach vorne rausgedrückt. Anschliessend kann man den gedruckten Adapter in das Lager…
This model is based on eedev's fan frame with the pogo pins on the side. In my case i didn't need the cutouts for the pogo pins as I was using the original cables and it was harder to print with supports in PETG. So I removed the cutouts,…
![Nut M12x1.5 [cable gland, Kabelverschraubung M12 x 1,5]](https://media.printables.com/media/prints/58596/images/5534175_4e949048-6d70-41c7-b47b-372342e3b1c0_b1030ddb-1236-4693-8475-29de9026c4d1/img20240103190349.jpg)
