Counting matching models…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
I love Crosman 1377 / 1322 Silencer Adaptor by k19k19 , but I printed it and adjusted the design multiple times and just couldn't get a model strong enough or that would print cleanly and nicely enough. So I remade it from scratch with…
Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol, have model errors, are low resolution, or incorrect dimensions. This solves the issue for me. I wanted a screwless, low…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.
A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…
Remixed from the two files. Took the front sight post off the original design and added it to the improved barrel band for the 1322. I do not run an optic on my 1322. I painted it white. Grab the silencer from the original 1322 Thing.…
I designed a replacement handle for the Crosman 1322 and 1377 pellet airgun. It has a picatinny rail on the left side that supports a flashlight or laser. It's nice for larger hands and feels more sturdy than the standard handle. Note…
Single side and triple picatinny mount for Crosman 1322 and 2240.
This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build. BOM: ESP32 Wroom with 38 pins and a wired WiFi antenna SSD1322 display ESP32 expansion board rotary encoder PCM5102 DAC…
This project is a slight refinement on the Thingiverse project: https://www.thingiverse.com/thing:2881213 I designed this to have tighter tolerances, and be a little more resistant to breakage. This is a completely customizable (made in…
This is a stiffening liner for the current narrow Crosman 13xx/Drifter forend. It completely fills the hollow space between the forend shell, the metal lever, and the air tube. Helps eliminate that toy-like feel when pumping and holding…
This is a first draft customizable picatinny rail for the Crosman P1322 pellet gun. All the parameters are customizable -- see the included OpenSCAD file. So this should be readily adaptable to any similarly configured pellet gun. The…
A custom, full length breech for the crosman 13xx series. This provides a way to mount lights, LAMs, and red dots all along the same section of rail. This uses ½-20 thread for the moderator mount, though I've included an M20 adapter I…
Requires 2x or 4x M5x12 bolts and nuts. A variation of mounts included. I recommend double screw mounts, over single screw. You'll probably want to make a mirrored copy of your chosen fine in your slicer (Press M in Cura). I've provided a…
Two box , one can carry Arduino/uno / leonardo or smaller board ( it's exatly a leonardo that i use in my icpmax) and the display. A smaller second to box display SSD1322 solo, so you remote where you prefer the screen (like upper ICP)…
This is a pair of replacement pulleys for a series of old Sears Craftsman 4" Belt Sanders. They replace Sears Part # 814105 Lower Timing Pulley & Sears Part # 814106 Upper Timing Pulley. These are made available for non-commercial use.…
Measured up a rear sight to be able to make a custom version of it. Here is the model. Should be pretty much 1:1 with real dimensions. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.12mm…
Thanks to the original maker of this file. I needed it to work for me, so I made it a bit stronger - Printed in PETG
The 3D preview on this site shows the negative objects as part of the model, but don’t worry — the model is designed correctly 😄 The preview here is very approximate. I also added a screenshot showing how it looks after slicing/rendering…
Since the DeLonghi fully automatic coffee machines do not have a holder for the hot water nozzle, I designed a simple holder to stick on. The holder can either be glued on as shown in the photos or rotated by 90°.
When I first got my 1322 I loved it, but as a leftie the safety wasnt very comfortable. I looked to buy a replacement but its $25-30 for one from china, so instead I made one myself. Ive been using it for months now with zero issues, just…
This was an ad hoc creation to fix the wheel connector on the upper rack of a Kenmore dishwasher model 665.13223N41. This IS NOT a factory replica or does it resemble anything that probably went there originally. I looked at the holes and…
Wall mount for Lego 21322 Pirates of Barracuda Bay ship. Two brackets required. Perfectly holds the ship away from the wall, while still allowing it to be easily removed. May be compatible with other lego ships with a similar footprint.
Wall mount for Lego 21322 Pirates of Barracuda Bay ship. Two brackets required. Perfectly holds the ship away from the wall, while still allowing it to be easily removed. May be compatible with other lego ships with a similar footprint.
A quick and simple design that adds a picatinny rail Uses the same screws that come with your Crossman foregrip
