Counting matching models…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
Note (200 mm Fan): As per request, there is now also a 200 mm Version with a Base (tested by another user, should be okay). This one is specially for the NOCTUA NF-A20 (mounting holes). Other 200 mm may or may not work. You need M3 x 16…
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
Inspired by MajorHardware, i redesigned the whole thing with Airflow in mind, the design works really great, it delivers a lot of air movement with minimal noise. You can mount the fan either by screws or like me just with 4 zipties, the…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
A standard 140mm fan protection grill I designed to place over fans fixed with rubber screws. Print instructions The rubber screws could be a little too tight for you (depending on the precision of your printer). You can drill the holes…
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
Printable tank model from our massive military sandbox Arma 3 . The tank turret can rotate freely. A licensed variant of the original Russian design operated by the elite of CSAT armored forces. The tank is equipped with a high velocity,…
After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…
This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…
Noctua design high efficiency fan grille for 140mm fans. Update : Modified corner radius to 8mm.
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
My remix of the vasemode tulip envisioned by Pezliz and brought to life by Bugman_140. This is a more closed up version to add some variety to your bugman tulip bouquets. I've also added my own “twist” on a vasemode stem. Prints in spiral…
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
Reduce noise PC fan spacer 120mm / 140mm 5mm thick
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
Printable filter for 120 mm fan. Mounting holes are at 105 mm, overall size is 120 mm. 0.7 mm thickness. Printing can be stopped at any layer you prefer. Model doesn't contain the grid. It's infill with 0 top and 0 bottom layers. In my…
Gwr 14xx 1400 class steam locomotive British rail great western railway model train model railway
This is a dust filter for a variety of fan sizes. The printed mesh blocks dust and debris from getting stuck in a fan. You could add a colour change in the second layer to create a beautiful effect. Make sure you are printing with a 0.4mm…
I made a fancy fan cover which is designed to optimise airflow. Testing video below explains more! You might also be interested in the 140mm fan insert for tights/pantyhose .
140mm Spacer für Gravitrax Hier findest du noch andere größen https://www.printables.com/de/model/511208-gravitrax-spacer-50-100mm if you like my model please leave a like there
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…
This model is compatible with the lego system.
This model is compatible with the lego system.
Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer
I designed this Adapter to Mount a 140mm Radiator on a 120mm Mount. I can also be used to Mount an 120mm Fan on a 140mm mount. Made an Test_ Piece as request. Instructions .2 mm Layer Height .8 mm Shell Thickness .6 Bottom/Top Thickness…
There is little clearance where the base attaches to the grill piece, so consider using exclusive slicing tolerance or they might require some post-processing.
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
PC fan grids for 140mm fans 3 styles: hexagon hexagon 2 sun
I needed dustcovers for a noctua 140mm fan for the Lack enclosure for my ender 3 v2, so i made them the easy way. It has the standard hole size and spacing as per 140mm fan standard. The filter itself is made by infil, so set top and…
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…
Between 1935 and 1938, the Czechoslovakian government had been building a line of border fortifications as a defense against Hitler's Germany. However, it was still far from finished in 1938, and in the end, it was never used because of…
This model is compatible with the lego system.
NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1
140mm Fan to 100mm Duct Adapter A simple, no-supports adapter that connects a standard 140mm fan to 100mm (4") ducting. Great for fume extraction, workshop ventilation, and general airflow projects. 🔧 What it's for Soldering / 3D printing…
Diese Halterung ist für die Zusatzkühlung der Deye Hybrid Wechselrichter 8, 10 und 12 KW LP 1 - https://www.amazon.de/dp/B0CCRPXSZY?psc=1&ref=ppx_yo2ov_dt_b_product_details LP 2 - https://www.ebay.de/itm/403863623678 Netzteil -…
A remix of The3Designer 's 120mm Angular Louvre Fan Grill to fit the 140mm fans. Scaled to 140mm size and added appropriate screw hole locations. If you like the model, support the original creator using his affiliate link.
Made in OpenSCAD 2021.01 Verified that the model works for 80, 120 and 140mm fans, if you decide to build the grill yourself, make sure that your mounting hole spacing is correct. The .scad file contains a few links for datasheets about…
This is a Remix from Major Hardware Deskfan, but with Laminar Flow. With this you will get a gentle Airstream, like a Dyson Fan. Happy Printing. Best to print it with 100 infill Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
Spacer for both sides of the 32140 batteries. Has cut-off for jumpers between elements. I set diameter to 32,5mm, so you may scale it for tighter holding. Added v2 with dovetail joint.
Well I bought the wrong cards, and loads of them. Turned out I needed 170mm for my steel target. So I made my own 140mm box. Indestructible by 6mm plastic BB's. I've been using it with 4,5mm steel BB's (at 3 joules) and it shows, although…
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 140mm computer fan, this versatile device is perfect for keeping you cool in the office or for fume extraction during…
Converts a 140mm small spool to 200mm diameter. This is the standard size for 3DJake small spools. Many thanks to bkilian for the original one and providing the Fusion 360 file to be able to adjust to this size easily! Original model with…
Tired of the smelly solder fumes floating around? This is the answer. A solder fume extractor with a powerful 140 mm fan. This solder fume extractor is designed to carry a big 140x140x25 mm fan. I used the powerful Noctua NF-A14 with 3000…
Those are great clamps, i'm using it everytime i use my CNC. Enjoy :) Edit: Added a V2 140mm clamp as requested Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: sunlu PLA…
These are both blanks, and with the original “CORSAIR” text. Fits the following fans in both 120mm and 140mm: RX RGB: https://www.corsair.com/p/case-fans/co-9051017-ww/icue-link-rx120-rgb-120mm-pwm-single-fan-expansion-co-9051017-ww RX…
Made some remix,and modify a 14cm version
Has a slightly better lift to weight ratio than the original 3 blade version and less flex
Used these to connect some of my Arctic P14 Fans. If you want to hang them, it's better to use these Connectors on both sides (top&bottom) - so to connect 2 fans you'll need 4 Connectors, for 3 fans you'll need 8 and so on. You can use…
Use my 120mm to 140mm adapter for the reverse configuration. This model is also uploaded on my Cults3D page.
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
After years of trying to avoid solder fumes I found it time to design and print my own extractor arrangement. Initially the idea was to produce a desktop located unit, but due to space restrictions and consequent positioning issues, I…
Fan mount for the Ncase M2 (inverted layout) There are two different designs available: ITX (recommended): The fan cutout is not shifted. This allows an easier routing of the GPU power cables. MATX: The fan cutout is shifted towards the…
Motivation I created this as a another variant of an adapter to mount 120 mm fans on a 140 mm radiator. I have offset the fan from the middle to create a bit more space for the mainboard, which was in the way when mounting fans directly…
140mm fan grill remix from Noctua 120mm fan grill
Pinza-Clip para bolsas de comida - 9 cm (90 mm) y 14 cm (140 mm)
The MPO 1400 Purgill-class Star Cruiser is a Passenger Liner from the High Republic Era. This is a model at 1:2,000 scale. It is 150mm long, 50mm wide and 44mm tall. The antennae are printed separately. There is a small notch at the base…
This is a replacement bottom plate for the Minisforum MS-01, designed to accommodate a 140mm fan for improved cooling. The plate features precise cutouts and mounting points, ensuring easy installation and optimal airflow. To complete the…
I wanted a box with a clean look that presents the litophane prints nicely by giving them a backlight. The box could also be used as a nightlight. One side has a round indentation to feed a cable through. In the pictures you see me using…
Needed a lamp post to keep my snowman company, so I sketched one I could use for some LEDs.
Installing a radiator in my case didn't leave enough room to mount a 120mm fan in the correct position, so I designed this bracket to fit a one in the little space left. Two brackets extend a 120mm fan to 140mm and add 4mm in thickness.…
This model is compatible with the lego system.
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
A simple fan mount for 120x120x 25 mm or 140x140x 25 mm pc fans. Don't use fans with a depth greater than 25mm! Thinner is fine! You'll lose 10mm Z travel, but on the other hand you'll have much higher chamber temperatures. Due to the…
A hexagonal fan grill for 140mm fans Designed by me in Fusion 360
This spacer is designed to maximize airflow with minimal noise impact, almost no added noise compared to running the fan unrestricted. I recommend using at least the 20mm version to ensure enough clearance for optimal airflow. 120mm: •…
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
Adding 5x 140mm fans with two 16x20x1 filters, giving it a large surface, makes noise levels virtually undetectable when running at max 12v. I made 3 of them so far. If I was to change something it would be to replace the panels screws…
Low material fan adapter with integrated screw holes for usual self-tapping fan screws. Print Settings Supports: Doesn't Matter Infill: 100 Category: Office
A compact desk fan using a Noctua 140 mm PWM fan, with the PWM speed controller integrated directly into the base. The design keeps the fan setup clean and cable clutter to a minimum while allowing convenient speed adjustment directly at…
Case for 4S EVE 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і активний…
Model based on the P-3 Orion and CP-140 Aurora. Plane prints well flat on the bed with supports enabled. The props can be printed and attached to the plane using toothpicks. Some toothpicks may need to be sanded slightly or squished in…
This LED Lithophane Globe contains 4 Nativity Scenes. It has a compartment to house a remote control LED light. About the Origins of this LED Globe: The lithophane was generated using the awesome Lithophane Maker website. The four images…
There are many radiator boosters. This one is for radiators with 140 mm inner width and 120 mm fans. You can use up to 4 radiators. The booster consists of two components: controller holder (need 1 print) fan holder (need 1 to 4 prints)…
The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.
osVAC Adapter for Bosch POF 1400 ACE
PCIe bracket for your PC case to mount a 140mm FAN to cool down your PCIe expansion cards.
140mm Fan spacer. 5mm high. 5mm Holes. F3d uploaded if you need to change anything.
Adaptor for Mounting a 140mm Fan on the Bottom of the Case where the shroud is normally located. Printed in DasFilament PETG Black.
Bmw E30\E28\E21 - door lock knob. OEM: 51 41 1 911 964, 51 21 1 852 140 Almost same with original part (a bit bigger in size for better fit in hole). Perfectly fits in original lock pin hole. Can be used with the original knob. But i…
I wanted to eliminate an audible hum I was hearing from a couple of my P12s, so I designed this 2mm dampener. You could use these with any 120mm fan, of course, but the corners are cut to match the P12 series specifically. There are 2…
I created a remix of the Glasses frame by Vladimir Waas to fix my broken glasses while reusing my lenses. Arms now connect to main frame. The file cele_bryle was scaled down less than 1% to fit my lenses. The arms can now be connected to…
This holder/hanger is specifically made for the Knipex Cutters 78 61 125 & the Knipex Needle Nose Pliers 25 01 140. It is possible that other similar types of pliers could fit. See my other Wall Control designs:…
Hello there! As I was upgrading my manufacturer sound system in my BMW E46 I noticed the original speaker covers killed a lot of the sound. After some research speaker covers with honeycomb design turned out as a good choice, as its…
You may be thinking - another front fan mount?… Yes, though this one is different from all the others I have seen. I personally didn't like the fact other designs added an additional section in-between the front plate and case.…
A scaled up version of the Noctua NV-AA1-12 Airflow Amplifier with mounts to work as a desk fan. The legs can also be modified as needed to attach to a wall etc. There are 2 versions of the legs which pivot off the main body, and are…
Design These items are made to connect 100mm flexible ventilation pipe to 140mm flexible air conditioning pipe with a clamp. There are also two sizes available. The short variant has a 30mm section to clamp the pipe each end and the…
Ich habe den 45 Grad Fan Direktor mit dem Unterbau des Noctua Fan Gehäuse genommen und miteinander verbunden. Somit hat man die Möglichkeit, sie zu schrauben oder so wie ich es gemacht habe, mit Magneten. Die Magneten erlauben eine…
For MacBook Pro 14 inches 2023, 96W USB‐C - MagSafe power adapter Added versions : 61w - 67w - 70w - 140w
I made this for a DIY enclosure. It uses a 140mm computer fan and has an adaptor that goes to 3 inch ducting. I attach the ducting with a hose clamp. The exhaust works decently if you crank up the speed on the fan. I printed out of PLA+…
computer fan cover 80, 120 and 140 mm You can find all my models here , thank you who will appreciate with a download or with a like
This is my ventilation prototype, using 2x old 12V 140mm computer fans, that I release early due to some requests. Don't expect this to be an easy print or project, but I don't have time to clean everything up. It is fully operational…
This is a compatible replacement for the DeWalt h1400196008 case handle, which is used in their TStak boxes, and it currently unavailable as a separate OEM part. There is a common modification to the DeWalt Tough System 2.0 Double Drawer…
This was designed specifically for the Thermaltake Tower 300 Computer case to stop your fingers and cables from getting caught in the fan blades when taking the top panel off. This can also be used for the optional rear fans connected to…
