Counting matching models…
The Fieseler Fi 156 Storch (Stork) was an unarmed liason aircraft produced in Germany before and during World War II, noted for its superb STOL capabilities. It would later be produced and flown by the French until 1970. I tried my best…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
Recently my family decided to remodel some parts of the house, that included cutting some walls using a grinding disk. In order to create channels to hide power cables in. I purchased a DeWALT DWE4156 along with a wall cutting disk, I was…
Started as a CAD exercise, turned into a research project. Following drawings by late John Coster-Mullen , a research paper by Yiannis Galidakis and a few photos and documents available I created a model of the first atom bomb. I had to…
I print this with PET-G at a 0.3mm layer height, works great.
This model is compatible with the lego system.
I am a semi-professional electronic hobbyist. Normally I would draw electrical diagrams on a computer, but once in a while it can be faster to jot an idea down. I found a very elegant stencil and was almost ready to print it out. But then…
Locking device to lock clutch housing, used on BMW R1150 motorcycles. BMW part number - 11 5 640. Printed in 100% infill with PETG. Works and holds perfectly, even with those five 40Nm and 32° torque settings for flywheel bolts.
I had an old, slow laptop that had not been used for years. I repurposed the screen, using an external controller board, designed and printed a case for the controller board and ‘feet’ for the monitor brackets. The controller board is…
This model is compatible with the lego system.
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
These were printed in a hi-temp PLA and epoxied to my stock tail light housings after enlarging the holes and sanding things flat. It allows you to use the 1156 and 1157 sockets and appropriate bulbs to hardwire your faulty tail lights.…
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
Needed parts: M8 bolt M8 nut 1 cent (euro cent) coin. Printing advises: 100% infill on both parts, at least on part 2. 200 microns is enough, but it is better to print in 100-150. working even with PLA you can use lubricant on the rail…
I creaded this 3d printable model of the molle lid grid for my Peli 1560 to be printed on my Anycubic Kobra 2 Max. The parts are connected with 1,75x16 mm metal rods (filament should work as well) and are mounted together with the spacers…
This model is able to convert old CPU coolers (in my case a lga 775 cooler)that have holes that are 38mm apart from each other. It will make old coolers useful again. Screws required are m3.
3 sizes of cupholder 56mm/2.2in ideal for 250ml/8.4oz cans 68mm/2.7in ideal for 500ml/17oz cans 76mm/3in ideal for 10l/338oz Americano shakes
HP KU-1156 keyboard - replacement leg
Project still in development! Geschichte Dieser Wagen wurde 1898 in Köln für die Nordhausen-Wernigeroder-Eisenbahn (NWE) gebaut und erhielt die Nummer 156. Im Gegensatz zum Wagen 154 hatte er kein Postabteil. Heute ist dieser Wagen in…
Scale: 1/1 Wheel Size: 17x8.0 Offset: 35 Bolt Pattern: 5x98 TR Sadece kişisel kullanım içindir. Referans aldığınız ölçülerin oluşturabileceği zararlardan sorumlu değilim :) Tüm Alfisti'lere selam olsun! EN For personal use only. I am not…
Description This is a Hex pattern vent designed to replace the top part of the OEM vent. Since it does not provide any way to close or open the vents, it's not something that I personaly use and it was more a props to test another…
This model is compatible with the lego system.
3D MODEL DESCRIPTION Alfa Romeo 156 Facelift keychain. 3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight, use Gray color…
I created a modular inlay for my Pelican 1560 Toolcase - Printable on i3 style printers. ==== This is currently still a WIP ==== I am working on and using this inlay system since more than two years now so I decided that it is time to…
This model is compatible with the lego system.
The nametag for Peli 1510 Case I found did not fit my 1560 case I made this. It also fits the 1510 and 1535 Cases with just standing a little bit over the top. But you can still close the Case.
D MODEL DESCRIPTION Alfa Romeo 156 Facelift keychain. 2 Versions. 1 with simple grill, 1 with honecomb pattern. 3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is…
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
Feel free to use it… The design was made with OnShape I made it from ASA with 0.12mm layer with 30mm/s.
I made 2 changes after using Mathieu_Duamas's handle. I made the nut thicker and thus easier to operate and I made the bottom flat so i could set it down. Otherwise the original is very comfy and I like the screw design requires no rubber…
This model is compatible with the lego system.
156DT Display Tree This is the library for parts for the 15.6mm Display Tower. This is a modular tower that you build to fit your needs. Optimized for .4mm nozzle .2mm layer where possible. Most parts are printed with no supports The…
A friend lost the battery cover for the remote of his LG Air Conditioner (model no. AKB73315611), so I decided to replicate the model using the other remote he has. It is better to print it in vertical or with one side in the hot bed…
I needed a lid for the 5.5 ounce, or 156 gram cat food can my senior cat now eats. This lid fits those cans well and keeps things fresh in the Fridge!
About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…
Note: I specially designed this to lock in place using old springs that you've likely got lying around from replacing weak print-bed springs, or the spring near your extruder knob. Smaller springs can be used (I'm using a combination of…
This model is compatible with the lego system.
Project still in development! Geschichte Dieser Wagen wurde 1898 in Köln für die Nordhausen-Wernigeroder-Eisenbahn (NWE) gebaut und erhielt die Nummer 156. Im Gegensatz zum Wagen 154 hatte er kein Postabteil. Heute ist dieser Wagen in…
Hier der Schließer für das Kühlfach in verstärkter Bauweise.
This model is compatible with the lego system.
Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…
A minimalist door hanger for a wc room, designed in the iconic single-line style known from the 1970s cartoon “La Linea.” The simple, playful silhouette and clear shower symbol make it perfect for homes, hotels, gyms, or wellness areas.…
Meine Tochter hat leider das Futter von der Katze verloren und ich habe dies anhand eines Fotos nachmachen können. Für alle Eltern die keinen 3D Drucker haben, ihr könnt euch gerne melden, ich Drucke euch das dann ;-) ich kenne das…
Used for 12V Led automotive light bulb (single pin bulb) 1156 or BA15S. Connector are Female quick connector 6.3mm . Design to screw the bulb, it is very tight (be careful with the bulb) but i made it that way for my usage. If you want to…
This clip holds side indicator in the car fender. It's easy to snap when you try to remove the light and it's not sold separately so having a replacement might be useful. I print them in PETG so they retain a little bit of flex needed for…
Replacement Shock absorber cap for Alfa Romeo 156. It might fit 147 and GT also. Category: Automotive
Uses the same labels the remix source: https://www.amazon.com/Avery-Frosted-Address-Printers-15660/dp/B000GOY6F0?th=1 Will get around to uploading the case model for this in bit.
Rejilla tubo extracción diámetro 156mm
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This is a great useful hook that snaps onto the HEMNES…
Velcro must be glued to the bottom! My printing settings: Pla Nozzle: 0.4 Layer height: 0.26 Infill: 20% No support
Welcome to the Developers library for the 3UDC clip system and the 156DTmm display tree. Both of these systems involves lots of components and I wanted to put parts and information needed to create things in a non-end user library. These…
This is a 3D-printable tool to loosen and tighten the OEM oil cap on a Honda S2000. The part number this works with is 15610-PCX-A01. It's easy to overtighten the oil cap and crack it in the valve cover. Do not crank on it with this tool!…
the actuator block on a friends recliner broke in half and he couldn't find just the actuator block. this block fits the smt60-02-156-204. I printed with 100% infill out of abs. The six side mounting holes are not threaded, you will need…
A modern and functional armrest table designed to transform your sofa armrest into a practical and elegant surface. Its round shape sets it apart from the more common rectangular models, offering a clean, contemporary look and excellent…
Print it however you want. I printed it with a 15% infill giroid and 3 walls of perimeter.
Left and right support for HP keyboard to angle the keyboard slightly upwards. Measurements based on original supports.
0,2mm Layer 6 Walls 25% infill ABS
Audi 80 OEM switch frame for behind the centre console switches - 893941567B - printed in ASA because I hate PLA for parts :) Recently broke mine removing the dash, someone might have a use :)
lego 3867 3811 2628 2629 15624 18922 71772 69958
Box for 250 CPU LGA 775, 1150, 1151, 1155, 1156 box dimensions 210x210x90 mm *** model is experimental - for me is working fine in future ill try make universal box for more cpu sizes like s3 s5 s7 s370 socket A, s754, AM2/AM3 and some…
Pretty simple design. I wanted something that was stackable and optimized for shipping. I made a single CPU version and a 9 CPU version. All versions are stackable. The one with “Tight stack fit” in the name was a first revision of the 9…
Shortened the connectors by 20mm to 156 to fit my smaller wall panels Also added a longer 236mm version but beware to not overload those Prints best with 3 perimeters and gyroid infill. Supports: optional Brim: depends on your printer, I…
I have aways been a fan of this ship from the old Jedi Outcast game, and this is a re-imagined look of the ship loaded with detail and a cockpit.
You will need a large form printer to print 400x400 or larger the back box is for a V59.AV2 the two av inputs are a RCA and BNC Comments or questions are welcome! If this saved you a bunch time, trouble,or a solution to and annoying…
Modeled in two parts, which slide over top of one another and lock into place to hold the processor securely within. This particular tray (I am making a series of these for the older processors in my collection) is for Intel Socket…
This is an under-desk mount for the Monoprice 111567 headphone amp/dac unit. It's similar in shape and size to some of the Fiio amp/dacs, but this was directly measured to ensure a correct fit. Mounts to the bottom of a desk using four…
Adds a chamfered edge to the Z-shaft cap bottom that gives additional clearance needed to fit the BTT Octopus/Octopus Pro control board (and other similar boards) underneath the Ultimaker 2 case using some of the existing Ultimainboard…
dieser lithophane Rahmen ist für 156 x 156 x 2,5 Bilder geeignet. Man kann in den Rahmen über eine Öffnung im hinteren Bereich ein led streifen einfügen. Durch das leichte biegen des Bildes rastet es in die schiene ein, dann kann man es…
Must be made of translucent material! My printing settings: Pla Nozzle: 0.4 Layer height: 0.26 Infill: 15% No suppot
Alfa Romeo 156 scale car model stl, a 3d printable 156 sedan replica for diorama and display. This printable vehicle is ideal for car collectors, model builders, tabletop scenes, and custom shelf or garage builds. The file is print-ready…
This is a 3D-printed cylindrical case designed for general electronic or mechanical projects. It features two closing caps with 0.3 mm clearance for a snug fit — optimized for PLA on FDM printers. I made it for my dad's hobby, he is happy…
ULine "H-156" tapegun wipedown blade replacement 2x M4 6mm Heat Inserts 2x M4 10mm Screws
Model to replace the IKEA part #156433 Finnala Sofa and Ottoman Connector
Originally published here: Motorola Moto X Play xt1562 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the…
Minpin 115 Top Camera plate for http://www.thingiverse.com/thing:1329897 http://www.rcgroups.com/forums/showthread.php?t=2580356 4/21 - Added version with antenna strain relief 4/25 - Changed the antenna strain relief version to 4…
Title: Custom VESA Mount (100/75mm) for JAPANNEXT JN-MD-IPST156U Overview: A dedicated VESA mount for the JAPANNEXT 15.6" mobile monitor. Improvements: I added an M10 hole and a lanyard hole at the top for flexible mounting options…
Keep your AA batteries organized and ready to use with this large-capacity storage box. The box holds 156 AA batteries in individual slots, keeping them secure and easy to access. Comes with a matching lid to keep dust out and batteries…
EN: To indicate that the container is empty. To identify the empty reading or indicator position on the display or container. DE: Um anzuzeigen, dass der Behälter leer ist. Zur Identifizierung eines leeren Behälters auf einem Display oder…
EN: To indicate that the container is full. To indicate the full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter voll ist. Zur Identifizierung eines vollen Behälters auf einem Display oder…
Inner Diameter: 14mm Compatibility: This fits standard rear sway bars for most Alfa 147, 156, and GT models. Please verify your rear bar diameter with a caliper before printing, as some sport packs or aftermarket bars may use thicker…
EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…
I wanted a lithophane box to display my HueForge lithophanes with an LED light board. I looked at Bambu Lab's design, but I found their box problematic: the light board had to be shoved in from the bottom and was difficult to remove, and…
I remixed Bmays AirBlade Assault 130 shield with angled micro camera mount (original shield by airbladeuav). All I did was removing most of the shield leaving only front plate with posts. If You use this mount, You'll need one 25mm spacer…
I've made an LGA 1567 CPU holder that fits the LTT-theme, for (almost) all of your turn-of-the-decade Xeon needs! It does come out to be a touch taller than the standard LTT holders (as shown in the last photo), but I tried to minimize…
The top parts of the frames are easily removable, therefore they are quite often missing so I recreated it for 3D-printing.
Cover for Eaton Buss 15600-10-20 Fuse Panel that holds 10 fuses. An M6 bolt with a thumbwheel holds it on. You can find the CAD file on OnShape (bussman_12v_fuse_block_lid) if you want to scale it for the smaller fuse panels (4 fuse, 6…
Got an LSC wireless camera in Action for 9.95€ and thought it would make a good Prusa Connect camera for my MK3S. After having the firmware sorted out (to bypass the Tuya / LSC cloud), I noticed that the ball joint is held on the camera's…
Ibuprofen, (+-) (C13H18O2, CAS 15687-27-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Instead of colour coding, every sphere carries its engraved element symbol. A one-colour print of a molecule…
1-Ethoxy-2-propanol (C5H12O2, CAS 1569-02-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. Plain ball-and-stick prints…
This is a model of the right foot/leg. Mirror in the slicer to print the left foot/leg. Print with minimal support for the nubs/tabs.
Audi 80 OEM switch frame for behind the centre console switches - 893941567B - printed in ASA because I hate PLA for parts :) Recently broke mine removing the dash, someone might have a use :)
Cup holders for Alfa Romeoe 159 that can hold 0.5 water bottles and paper coffee cups. For a decent quality of the logo, print with a layer height no larger than 0.15mm. The cup holder should be printed out of ABS/ASA. The wedges should…
This is just a remix to fit my DuraTech 1564 Soldering station (TS1565 Pencil). https://www.printables.com/model/401191-heat-insert-drill-press/files
This model is compatible with the lego system.
The nametag for Peli 1510 Case I found did not fit my 1560 case I made this. It also fits the 1510 and 1535 Cases with just standing a little bit over the top. But you can still close the Case.
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
I created a modular inlay for my Pelican 1560 Toolcase - Printable on i3 style printers. ==== This is currently still a WIP ==== I am working on and using this inlay system since more than two years now so I decided that it is time to…
I creaded this 3d printable model of the molle lid grid for my Peli 1560 to be printed on my Anycubic Kobra 2 Max. The parts are connected with 1,75x16 mm metal rods (filament should work as well) and are mounted together with the spacers…
the actuator block on a friends recliner broke in half and he couldn't find just the actuator block. this block fits the smt60-02-156-204. I printed with 100% infill out of abs. The six side mounting holes are not threaded, you will need…
Scale: 1/1 Wheel Size: 17x8.0 Offset: 35 Bolt Pattern: 5x98 TR Sadece kişisel kullanım içindir. Referans aldığınız ölçülerin oluşturabileceği zararlardan sorumlu değilim :) Tüm Alfisti'lere selam olsun! EN For personal use only. I am not…
![#0156 Bed Frame Mounted Hook [IKEA]](https://media.printables.com/media/prints/882196/images/6785579_a8adf825-9c93-40e5-b39a-b894c8737b25_f5fe6190-5b37-488f-8458-02bd9f3af672/20240518_200315.jpg)
