Counting matching models…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Cubo de calibración de 15x15x15mm
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
Box - outer max dimension 204x170x52mm - inner max dimension 196x146x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill 30%…
Box - outer max dimension 204x170x102mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill…
designed to fit in a prusa bed, could modify it to also fit bambu P or X series for now i just printed a 3x3 test piece and it's perfect, i'll print it full soon.
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…
Flexible Drag Cable Chain 15x30mm Includes both end links, closed links and open link. No removable cover. Look forward to the near future. You should probably use supports. This thing repeats the design of the product that can be…
I print this with PET-G at a 0.3mm layer height, works great.
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
This a 48 sample pack of approximately 15x5 cm climbing holds with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
This is a smaller 15x15mm test cube that can be used to monitor your overhangs and dimensional accuracy. It can also be used to test for retraction issues (under/over extrusion after retraction) and printing artefacts. Happy printing!
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
The source marked this model as adult content.
Box with handle - outer max dimension 204x170x112mm - inner max dimension 196x146x100mm Video with disassembly: Used screws: M3x8 4x 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls…
When one of my friends was complaining about never being able to find any minidisc storage, I immediately thought about 3D printing (as I often do). I already had a cassette organizer I'd designed to use vase mode, so adapting the design…
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Remixed from a Thingiverse file. The original file didn't have enough clearance for the Heat-pipes, which I have fixed.
Verbindungswinkel zur Verbindung oder Verstärkung. 5 mm Schraubenlöcher. 15x20x2mm - Ø Bohrung 5 mm
Thread 15x2,5mm Recommended settings: Material: PLA or PET-G Layer height: 0,2mm Perimeters: 5 Infill: 50% Supports: YES Let me know how your print fits. :)
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
3030 Aluminium profile M4 nut 15x6mm Designed for standard M4 hut with the following dimensions: 7x3.2mm 3030 Aluminium profile drop-in M4 nut T-nut available here: https://www.thingiverse.com/thing:3559740 Category: 3D Printer Parts
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
There are 2 versions of the frame one for landscape and one for portrait. It is a 2 part print. Frame and stand. I printed with 2 perimeters, 4 top and bottom layers. frame was printed in standing position. Supports recommended but with…
Layer height - 0.12-0.16, 3 perimeters Высота слоя - 0,12-0,16, 3 периметра.
This is a generic spices organizer. The holes have a diameter of 43.25mm (measured a “Ostmann” chili spice at 42.5mm. There are 15 holes so you can add a variety of spices. I also included a STEP file so you can adjust the model for your…
My Automower 415x had trouble with my lawn, so I started experimenting with wheel designs. I went through several iterations and this design seems to work best. The main problem I had printing is the size - these wheels are too big to…
NEW V4, NOW UNIVERSAL!! It has been designed for a 15mm axle and 110mm space. Used with a RockShox SID Select+ 2020 Torque cap compatible ( THIS IS IMPORTANT ). The skewer must be inserted to secure the bike. I have been using it for…
Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.
What Is This? There's a dire lack of FDM printable Kailh Choc keycaps that work on mininum spaced boards, such as the minimally spaced version of @kilipan 's excellent Zilpzalp . I wanted to fill this keycap void, and also design a keycap…
Perimeters: 3mm height, 15cm wide, 20cm height optimal print: no auto color change, manual color change to 2,20mm bottom half: TPU or Prusa Flex top half: any solid non flexible (can also be printed with flexible, depends on preference)…
Display your favorite EDM car wherever* you want! (*if by wherever you mean any 15x20cm frame) I found this and some similar designs of Golf MK2's and wanted to make a gift for some friends of mine who recently bought one each (GL and…
Einfacher und minimalistischer Bilderrahmen für 15cm x 10cm Fotos. Je nach Foto kann das Standbein horizontal oder vertikal festgeklebt werden. Druck ohne Supports mit 0,2-0,3mm Schichthöhe
Druckt es mit der Flachen Seite nach unten :D - Kein Support Notwendig.
Cable Zip Tie Mount 15x15mm To install, you may add double-sided tape or glue to the bottom, and then attach the cable with zip tie. This model doesn't require support to print.
These plugs are designed to go inside a seasucker HUSKE mount and let you put your thru-axle bike on it. Highly recommend printing this as 100% infill as you want the part to be SOLID. Also recommend a brim and upside down. I designed it…
My take on a simple 3 shelf (x5 bottles) rack for storing paint bottles of vallejo type (or my design https://www.prusaprinters.org/prints/152150-model-paints-bottle ). Printed i prusament PETG with standard mini (0.40) nozzle, using 0.20…
Honeycomb storage wall with thicker outer walls for all printers with a print bed of at least 215x203mm.
Test d'un roulement imprimable diamètre intérieur 10 mm diamètre extérieur 15 mm hauteur 4 mm
Just a simple 15 x 3 bit organizer. The back row has deeper pockets for slighly longer bits. Gets attached by 3 (or2) screws to a flat surface or just stands on your desk. I printed in PETG 15% infill 0.4mm nozzle 0.2mm layer height…
Warhammer Citadel Paint Stand Was asked by my brother to create a stand for his Warhammer paints. His Instagram Page - https://www.instagram.com/theforgotten3rd/ 40 Paints can be stored in each stand. Sixteen of which are instantly…
I modified the model to fix the problem with the oval hinges. You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
A pan and tilt for 15x15 camera. Tilt servo is 4.3g and pan servo can either be 4.3g or 9g. Servo arms to be glued into the arms. Camera can be mounted on either side of the servo, use MIR files for other side. Can be printed without…
It's a trash can… there are some trash cans here, but they're all circular. This one should be easily modifiable to my specific needs, perhaps even for use as a storage container. I added a superstructure for larger basket contents. The…
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Back to the Future–inspired wall plaque featuring the Hill Valley clocktower,…
this model make hole for KCD1 switch KCD1 size 15x21 original model from https://www.printables.com/model/724543
These models were created for me by Fiverr seller Gaurav Dubey as part of a video project. They allow you to add a 15x3mm magnet to your multiboard, in 3 different ways: Regular Snap Double-Sided Snap Large Thread Choose whichever you…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Wall art plaque featuring the classic T-Rex silhouette from Jurassic Park,…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Stranger Things–themed wall plaque capturing the terrifying moment when the…
15x110mm thru axle mount, with clear holes for screws
This is a simple system of pieces that use 15mm x 3mm magnets to snap together for mocking up and prototype routing exhaust or other pipe routing. This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm. In…
Solar Filter for Binoculars 15x70 or 20x80 and 10x50 use with BAADER AstroSolar Safety Film (OD 5.0) Use a tap to create a thread for screw FreeCad source Category: DIY
Other front axle mounts available here are perfectly fine, but i needed one with a bit more clearance for the Rockshox ZEB fork's rebound-adjuster-cap.. So i made this one. Print Settings: PLA+ or PETG 20-30% infill does print fine…
Make sure to set minimum perimeter width to 0.35mm, even if you have a 0.6mm nozzle
Motivation On cable channel corners, often cables are visible or open ends of the channel are visible. This cover gives a nice looking corner when the cable channel is visible. Print Printed with SUNLU PETG without supports Brim is…
CZ: Adaptér není vhodný pro použití ve vodovodním řádu, kde může být tlak až 6 bar, nicméně pro montáž za vodovodní baterii u sprchy, umyvadla či dřezu je možné ho použít (nízký tlak). Pro tisk doporučuji použít PETG (zdravotně nezávadný)…
This is the same as chttrs's variant with the top wall thinned to fit on a 15x15cm build plate. Be careful inserting the phone, or the sides are likely to shear off. This is a problem with the original model as well, so caveat emptor.
Napkin holder for Ikea Storatare napkins. It fits 15cm x 15cm napkins. You can store your napkins laying down. Just put them in place and they always lie , no matter how many you have left.
Printing recommendation: Perimeters 3min-6max Enable brim (5mm) Every bike mount needs to be printed at angle so It doesn't delaminate when force is applied. Adding support in slicer is not best solution so I added custom support for nice…
3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!
The source marked this model as adult content.
Kabelkanal Ecke Hochkant für Kabelkanal 15x15mm als Abschluss und als Verbinderprofil.
GEPRC Cinelog 30 v3 gps mount 15x15mm
A simple holder for Intel processor with LGA 115x sockets. These are: LGA 1150 LGA 1151 LGA 1155 LGA 1156
STL assumes 0.2mm layer height and 0.4mm nozzle and a ≤0.41mm first layer extrusion width. Printing: Disable elephant foot compensation. Makes sure that first layer extrusion width is set to less than or equal to the extrusion width in…
A wardrobe bracket for a 15 x 30 round rod. To be mounted using 4 mm screws. DISCLAIMER: Neither mechanical nor thermal tests have been done. It is unknown how much weight the bracket will hold. CREDIT: this “thing” is very much inspired…
90 Degree Bracket (15x8mm) with cut-out for 2xM3 nuts.
here is my take for an auxiliary fan for my voron 0.2. i had trouble with printing PLA in the enclosure, because of insufficient cooling for the parts. the mini stealthburner couldn't provide enough partcooling for PLA. i designed the…
Zusammenfassung: Remix of https://www.thingiverse.com/thing:3055127 Instructions insideDim = 12.7mm outsideDim = 15mm protrusionLength = 15mm roundoffRadius = 1 fittingType = 5 Eckverbinder für Vierkantrohr.
Adapter to fit an oldschool Zalman CNPS 9000 CPU cooler onto a newer 115X Socket like 1151 in my example. I used a generic backplate which accommodates the m3 screws. Just normal nuts with a non electric material inbetween the mainboard…
This allows you to mount 15x CNC end mill 13x13mm boxes to your Multiboard. It is 124mm wide and can be mounted next to each other with a gap of about one millimeter. It might a bit tricky to read and reach the back row of end mill boxes,…
Mit dem schlichten Bilderrahmen könnt ihr euch eure eingene Bildercollage erstellen, nahezu ohne Grenzen. Es brauch nur ab und an einen Nagen oder eine Schraube in der Wand. Die Ramen sind für 10x15cm Bilder und wiegen selber fast nix.…
Print-in-Place Bearing (15x35x11mm) Engineered with tight tolerances to minimize play, it serves as a robust alternative for non-critical mechanical assemblies. Technical Specifications Dimensions: 15mm x 35mm x 11mm (Width). Scalability:…
i have to fix my customers pc with broken psu (caused probably by shorted fan), having lots of spare socket 775 fans and not any 1156 one in hand, ive made one to fit original heatsink and modified 775 fan. board is Asus, but top part…
what is this? we had an electrical junction box, closed by a lid 15x15cm, fixed by two 4 mm metric screws. this box had glued wallpaper with some structure and been painted white several times over the decades. the lid broke and the…
This picture frame you can use for 15x10cm landscape and portrait pictures. no supports needed 2 perimeters 4 top and bottom layers
This is a compact 90 degree brace for Openbeam/Makerbeam XL 15x15 extrusion. There are two versions - one is a straight 90, the other is a very handy 90 degree rotated variant so you can do crossovers. The crossover version is pictured in…
May 21, 2019 I turned my horizontal photoframe 15x10cm to the vertical direction with the same design. Category: Household
Assuming 0.2mm layer height and 0.4mm nozzle.
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Terminator-themed silhouette wall plaque featuring Arnold Schwarzenegger's…
wago 221 414 mounts for voron0 3d printer 15x15 (EXTRUSIONS)
I've found the vertical photo frame by emrekoch on thingiverse and redesigned it to my horizontal photo frame for 10x15cm photos.
Remix of the excellent thermometer holder by Tony Rueb. Model can be found here: https://www.printables.com/model/155862 This remix allows for use of six 15 x 2 mm magnets
Remix of Alans mount to fit a 15x30 chain. This fits this chain from Amazon. https://www.amazon.com/dp/B0BY8H1LNS
Rustic-style picture frame designed for a 15 × 15 cm acrylic sheet (1.85 mm thick). Required components 1× 150 × 150 × 1.85 mm acrylic sheet 1× 3.5 mm threaded insert 1× M2.5 bolt Frame must be printed with supports.
I remixed the model to include a hole large enough for filament to be used in place of a finishing nail.
Not tested yet! This thingy is supposed to protect the threads on the muzzle of my Haenel CR 308 - hence the outer dimensions. I intend to print this in PC Max. It should withstand a few shots, it just must not get too hot. For hunting…
Ein Abzweiger für Links und Rechts in bestehenden Kabelkanal 15x15mm, Öffnung herausschneiden und den Abzweig dann hineinklipsen und dann Deckel drauf!
Hi, this is my take on creating a small bracelet that could be easily 3D printed and assembled. Each "Master" adds about 12 mm to the bracelet, I use 15 of them +the lock on my wrist, so maybe print around 16 the first time and see if you…
Read the description in the original design for the usage and need design details. To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.) In this version (I've called it a “remix” but I think…
Abdeckplatte für ft-Rollenlager zum Bau von Kabelkanälen. Ein passendes Eckstück (17mm hoch, gleiche Höhe wie Rollenlager + Abdeckplatte) ist auch dabei.
rotate landscape photo frame 15x10cm divided in two part for easy print need some glue for assembly but not extremely necessary cut with your slicer and organise it on your plate as you wish and print it... my wife loved it and asked me…
15x30mm end cap for a cable duct
![Honeycomb thicker outer walls [215x203]](https://media.printables.com/media/prints/580575/images/4635119_1ad4682c-bfab-4777-9b72-abd9570be0cb/honeycomb-walls.png)
