Counting matching models…
Wall mounting your Lego Technic model frees up valuable desk or shelf space, making it a great option for smaller rooms or offices. Custom designed bracket specifically tailored for specific lego technic supercars and provide a secure…
This model is compatible with the lego system.
I created this dust collector for my Bosch Router's 1617 fixed base. It fits a 1.25" hose connector to my dust collector and uses two M5 x 10 - 20 mm long screws/bolts to secure it to the router base. The other dust collectors that I've…
Dust collection shroud with vacuum attachment for Bosch 1617 plunge router base. Holes for optional 5mm LEDs.
This model is compatible with the lego system.
Bosch 1617 Router Plunge Base Dust Adapter
Simple case for PAM8610 amplifier. Tight fit around the board. Button size is 15x10mm. Photos show PLA draft print of 0.3mm with thin wall detection.
This model is compatible with the lego system.
This dust collector port is for any vacuum port that has a ~1.25" nozzle on it. The neck is tapered to 1.25" about half way down, fits nice and snug. The hose pictured is the hose from the car cleaning kit for Rigid shop vacs. I wanted to…
When this little beast lands on rooftop, this piece can easily break. I designed a spare, much stronger part. Fitting perfectly with 0.2mm layer height print. Make sure you slice with 100% infill. No need for supports. No need for raft or…
Remix mit einem längeren Schaft (31cm) und einem Loch für M4 Gewindeeinsatz.
I design this to help make better videos for TikTok. It uses one 608 bearing (skateboard wheel bearing). With this it makes easy to turn your product around to show off all side with one finger. If you like this or make this please share…
Update 03.09.2023: Improved "click and clean" ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes (only "base" detail) Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: red, light blue Filament…
This model is compatible with the lego system.
This is a drip tray replacement for a Black + Decker Electric Griddle (GD1611B). If your griddle looks similar to this exact griddle, this replacement may work for you with some slight editing! Print instructions It is recommended to…
This model is compatible with the lego system.
This is a homemade insert to make your own budget Router Table. This is made to fit the Bosch 1617. 3D PRINTING SETTINGS 20% infill. Choose own layer height settings
The original model by Thingiverse user mattcoon was a great start, but I wanted to improve their f3d model to have cleaner geometry and less air restrictions. I eliminated internal overhangs that would not print super clean without…
News, 28.03.2020: I have now added three version of the Extrudermount, the recent one is the one with BMG in the title, and was designed around a BMG clone extruder, but should fit regular BMGs as well. Also added the missing…
This is a plate for table mounting a Bosch 1617/1618 with the table mount base (RA1165). It is designed to flush mount in ¾" plywood (actual height .72" / 23/32"). I had a ¾ MDF below that to support the plate, but this could be anything…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I developed and tested the STRONG and EVEN STRONGER…
I created two bases for my Bosch Router's 1617 fixed base to accommodate a larger chamfer bit than the original base would allow (2.5" diameter chamfer bit). I've opened up the central hole to 80 mm / 3.14" to give some extra opening…
Design description This is a gridfinity holder for 22 CR1616 Coin cell batteries. Block area is 1x1, and has a height of ⅔, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
Bosch 1617 Router Fix Base Dust Adapter for Roter Table
This variation provides a pretty good fit to the “window” on the RA1161 base. I moved the plastic piece that Bosch provides to cover that window to the other side of the base. Slipping the cover behind the height adjustment shaft is a bit…
I created this model based my previous Bosch router base plate design. I added an extended portion to the base and a large handle to make it easier to route the edges of larger wood projects. The router tended to lean towards the work…
My 2032 and 2025 version of the battery storage clip. Batteries are held in by the sides which curl around above the centre of the battery. 2025s fit but rattle a bit because they're thinner but they don't fall out, the picture shows 3 of…
A tool mount option for the V1 Engineering LowRider v3 CNC (LR3). Hardware changes are necessary to accommodate.
Custom-designed strengthened front shock tower for MJX Hyper Go 1/16 scale models. This part is a direct replacement for the stock component and is engineered to fit precisely using the original hardware. Printed in solid with 100% infill…
This is a vacuum adapter for the Bosch 1617 fix based router. You'll want to use this exclusively if you are using a festool hose, as the attachment type is designed to solidly lock in a festool hose with the cleantec end (27/32 mm). If…
A cover to prevent dirt, dust or small stones getting to the gears. (This is a remix of Dionarap's design.)
Part Number 11141716134 Holder Part 11141716134 was found on the following vehicles: 3' E30 (01/1982 — 04/1993) 5' E28 (11/1980 — 01/1989) 5' E34 (06/1987 — 10/1990) Z1 Roadster (07/1988 — 06/1991) You can purchase an original one from…
I bought a cheap 1610 engraver (the LinkSprite, but honestly, I think they are all the same). It had some wing nuts for clamps but it was hard to get things to hold still on the bed. Print 4 of these and use the wing nuts to secure to the…
I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
Dust boot for Bosch 1617 router with air diverter and magnetic dust ring. 4" and 3" vacuum hose adapters are included. The air diverter (center section) can be omitted if not needed. In that case, use M6x16mm bolts instead of the M6x35mm…
Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…
Multi battery organizer - 4xCR1616, 10xCR2025, 10xCR2032, 4xCR2450, 4xLR41, 12xLR44, 6xLR54, 6xAA, 5xAAA, 2xSD, 2xminiSD
the stock rear part is broken easily, so I found a model and fixed some geometry issue and enforced it. enjoy! here is a small video on how it drives :) and one more updated: just broke the same part on the other model 284131 - and it…
prints with no supports
Bosch sells the fixed base without handles for mounting the 1617 router in a router table. It is identical to the fixed base supplied with the router. I managed to pick oe up at a yard sale, but already have a router lift in my router…
Two STL one logo and one NO logo. For logo to come out recommended a smaller nozzle and/or quality print settings. Remix of Part Number 11141716134 To make it stronger and thinner in the engine bay. Less slop in the cable moving around.…
Made for the Bosch plunge base for the 1617 router. Mk6 is a major rebuild. It allows it to print in a vertical orientation in order to add a lower extension to collect closer to the cutting area, as well as extending the wrapround shroud…
This model is compatible with the lego system.
TL;DR first: Welcome to my Overhaul of the Creality Ender 2! Im starting here with version V2 (V1 is only in one picture; there was too much wrong with that), which comes in 2 iterations/stages: ++++++++ Stage 1: ++++++++ changing out the…
A mount for the Fly SB2040 v3 Pro LDC1612 sensor for the Chaotic CNC Tap As Klipper currently doesn't support endstops via Eddy.
I did the nose cone in PLA or PETG. Topclamp was TPU Bottomclamp TPU, PETG, ABS. Pretty flexible if you want to try other masts. Easily can swap out all the parts if needed. Uses m5 x 100mm socket cap bolts
This is a simple wall mount for the Lamborghini Huracán Technic LEGO set 42161 that can leverage command strips to mount to the wall in vertical or horizontal direction. I originally printed this on the P1S in .2 and gyroid 15% infill and…
This is a replacement for the Braun Juicer 4161 switch spring (part #81262218). The original part got some fatigue cracks over the years. I was unable to obtain an original spare part, but I didn't want to throw away a good juicer, so I…
It's a pain when you need to change your router bit or collet, and find the box where the tools are kept, or hope they're on the shelf where you last left them. I decided it was easier to create a custom holder for all of the parts that…
This model is compatible with the lego system.
Dust shroud with Cen-Tec Quick Click port
This is a pair of trays for the Titan Tools 17 Pc External Torx Socket & Torx Bit Set, 16160 (Amazon affiliate link). One tray holds all the ETorx Sockets, the other tray holds all the Torx bits and the socket driver for them. Each tray…
This project contains 5 improvements for a 1610 CNC. These improvements were inspired by the following YouTube videos of JJ Hontebeyrie: https://www.youtube.com/watch?v=NNrqx62lyBI&t;=602s https://www.youtube.com/watch?v=_gX_YCsN4wo 1.…
Toroidal propeller for a 10mm shaft. Check the drawings for dimensions, this propeller will NOT fit all flipsky 65161 motors. The hole for the shaft is 10.4mm as it is likely to come out closer to 10.1mm after printing. You can edit the…
Stand para el grandstream 1610 Print Settings Printer Brand: Hellbot Printer: Hellbot Magna 2 230 **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 10 Category: Tool Holders & Boxes
Dust collection adapter for connecting the Bosch 1617 plunge base to Festool 27mm hose. Requires: (2) M3x10mm screws (2) M3 hex nuts (2) M4x25mm screws 3 perimeters, no supports.
Hi ! Bored about dust falling into the rail of your favourite 3018 CNC and family ?... A simple snap-on dust cover (but it takes time to design in order to have a good snap-on effect and left the maximum space under the cover for cable)…
Dust collection adapter for connecting the Bosch 1617 plunge base to Festool 27mm hose. Requires (2) M4x25mm screws.
The base that shipped with the tablet felt like it was undersized. The pen fell out of the base several times so I made a deeper one.
This model is compatible with the lego system.
Something small to hold my portable monitor upright. Sized to fit an acer PM161QT, the two hole version, but may fit others as well. Two versions: 10 for ten degree tilt. 22 for twenty two point five degree tilt. You will need two m4 x…
This model is compatible with the lego system.
A stand or wall mount for the Lamborghini Huracan Technica Lego Technic model. Slot into the base to show off your build or (using the 2 holes) securly mount it to your wall. Printer: Creality Ender 3 V3 SE Nozzle = 0.4 Medium = Bambu…
This model is compatible with the lego system.
I tried another pen holder for my CNC, but I found that it didn't have any support near the pen tip, and the style of pens I'm using (Staple's ultra fine tip permanent markers) really don't draw well without support. I've started using…
I ended up with a used tote that was missing a latch, so I modeled one. I printed in PLA, 3 walls, 20% infill, and it is holding up fine so far. In the photos the black latch is an original Plano part, the grey latch is a printed…
I recommend using the compact version, it uses 2 less screws and its more durable. There is a version with separate parts if fits you better. There are no adjustment for the position of the wheels, if you want it lower or higher, print…
Use supports, nasty to clean it but it is needed.
I've printed it with the circular shape on the bed, using 0.3mm layer height, PLA, 20% Cubic infill, with the seam position set to random (since I think that this a better ‘air tight’ connection). No support needed. It fits quite snug…
The bosh is 3.5" Diameter this will reduce it to 80mm
Holder enabling the installation of windshield washers from a Mercedes Sprinter to a VW Transporter T3. Recommended for production models from 1979-86 that had problems with the correct setting of the factory washers. The modification…
I made this in Tinkercad to fit my multimeter. Very tight fit with cable holder. Use heatgun or similar if too tight. can be bought here: https://amzn.to/3tRcMsx
The “WB1616 Flat Mount” is for mounting the controller into a CG1500 type box. M3x20mm and M3xx8mm are uses to attach the controller. #4-40x3/4" and #4-40x1/4" can also be used. It can be printed without supports. The “WB1616 Meanwell…
Here is a mount for the ChipSHOUTER, a electro-magnetic fault-injection tool, to fit a classical CNC laser module mount. If your CNC mount doesn't have the notches to fit a square laser module, you can easily adapt the design to be shaped…
I'm not able to install my surround speakers in the ceiling, so instead I made a mount that lets me pop them on top of a couple of microphone stands when it's "movie time". Print instructions Category: Audio Summary I'm not able to…
Bosch Router 1617 Fix Base Insert Ring and Box
Wltoys 284161 sand-snow tyre
I have a Bosch 1617 router. I love the router, but I'm not a fan of proprietary accessories like the Bosch guide bushing set. I got a set of bushings from Harbor Freight and modeled this to work with them. The screw holes are not actually…
Dogbone for testing to the JIS K 7161:1994 standard. bamboo pa6-cf. is a fine chop but it is super rigid. Printed flat with wall thickness set to make the part solid in the center PLA meta was printed with 0.4 nozzle with 6x walls to make…
I made this version to support vertical mounting of the IO Node boards from Fast Pinball. The regular version is full height, with a cut out so you can see the status and to avoid some of the surface mount components along the left edge.…
Note: this model has been migrated from my Thingiverse account. It was made about three years ago. First I bought the wrong batteries. I wanted to replace the battery a few of my cartridges but I also wanted them to be easily replaceable…
This part adds a reduction pulley to the Kenmore 158.161. I suspect it will work on similar models like the 158.540. The mount uses a pulley from a Kenmore 158.12511. This pulley may also be found on models 158.12510, 158.12512, 158.12520…
Metal panels made of 1mm aluminum: 2x 3mmx2.0mm screw for each side/door 4x 5mmx2.0mm screw for the roof 3x 5mmx2.0mm screw for the hood Spoiler: I used the screw of the wheelie bar wheels to assemble the two parts. Base printed on the…
I designed this wrench for a water store with a commercial water filter system. Seemed to be for the reverse osmosis filter cartridge. Inner diameter is 161mm. The wrench is quite large but I printed it on my MK3S+, just had to rotate it…
M1161 Growler Internally Transportable Light Strike Vehicle Wall Art SIlhouette model. Adjustable size.
This is a remix of my original version. The original has been working well. I received feedback that it would be better if it did not block the holes in the router base. That way you have a little better visibility of what's happening. It…
Destop stand for bose or other company speakers
"Manual gearbox ball socket OEM:A0009930161" Model of a plastic part from 1996-2004 Mercedes-Benz A-class w168. It holds a weight that helps shifting feel smoother. Mine failed and fell completly out, so the shifting felt hard and…
Wall holder for water sensor D-Link DCH-S161. Main unit of sensor is prepered to fix on wall with 2 screws. I didn't want drill my new tiles, that is why I designed this holder. This holder will help you fix sensor main unit with double…
Made some caps for the stock tires for less grip. Now I can drift with my off-roader. Just use any material. I used PLA - works just fine.
(CZ) Drobnost, ale potřebná. Nezáludná na tisk (EN) Little, but necessary. Unsurpassed for print Print instructions Category: Automotive Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,2 Infill: 100%…
Just print it and have fun making 161 cookies :) 0.4 nozzle should be perfectly fine. I chose Creative Commons - non commercial as license, but just do with it whatever you want except using the design to make a lot of money for profit :)
This model is compatible with the lego system.
Battery holder for 18x CR1616 Batteries. Once filled, put a rubber band around the whole thing (long ways), to hold them securely in place. Also designed to be slightly shorter (on end) than a D sized battery, so it can fit inside a…
My Build I started this project in the spring of 2026. It is documented on FoilZone: https://foil.zone/t/2x-budget-efoil-builds-from-sweden/26310 Included folders Board Assembly STEP – Main board assembly components 65161 Fliteprop…
Merged the ideas of @JBear40_ and @Daniele for a adhesive based slanted hair straightener holder. Tested and works with Revlon Straightener Model RVST2174
![#0161 STRONG #8 Racetrack Double Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/882189/images/6978605_0d7baa1d-6198-4119-97c0-24ae7e11ad5c_795317cf-4c65-4771-8c57-787a2aa39eab/20240615_162825.jpg)
