Counting matching models…
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
I wanted a drip bracket integrated into my build plate so that I didn't have to hold the dripping build plate with one hand and try installing the bracket with the other, but the double sided ones that I found didn't have clearance for…
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
Due to the new printing platform design of the Elegoo Saturn 4 Series, cleaning excess resin can be more challenging. This drip bracket is compact and helps recover a significant amount of unused resin while also reducing platform…
Elegoo Saturn 4/Ultra/16K bed drip mount extended to suit buildplates with handles https://www.thingiverse.com/thing:6954020 Category: 3D Printer Accessories
handle for the Elegoo Saturn 4/4 Ultra/16K M5 threads 70mm centres Category: 3D Printer Accessories
Elegoo saturn 4 ultra 16K bed drip 90 degrees , this allows for maximum resin draining from the bed and complete closure of the lid. Category: 3D Printer Accessories
Top and bottom tank protector for keeping your resin tank safe in or out of the printer. M4 nuts required for bottom section to screw together! printed these on a Creality K2 Max in PLA Category: 3D Printer Accessories
its a very high pitch whistle that each one takes 3 mins so like this you could do 48 at once
its a very high pitch whistle that each one takes 3 mins so like this you could do 22 at once
When using the exposure test of the Elegoo Saturn 4 Ultra 16K, the individual test objects must not overlap the boundaries of the 4, 6 or 8 segments under any circumstances. To ensure this, especially with larger test objects (e.g. the…
This is a drip hook for the Elegoo Saturn 4 Ultra 16K , which you can use to drain your prints vertically above the resin tank up to a height of 195 mm . After printing, simply move the print arm to the highest position , attach the…
I wanted a drip bracket integrated into my build plate so that I didn't have to hold the dripping build plate with one hand and try installing the bracket with the other, but the double sided ones that I found didn't have clearance for…
The model can be easily clamped to the housing. I used a little superglue to be on the safe side. It was important to me that it didn't get in the way when changing the tank and didn't cause any collisions in the Z-axis movement.
This build plate handle leverages the taper of the leveling spring box on the S4/ S4U to clamp and positively lock. No screws needed, just a dab of glue at each end of the handle and the straps. Note the screws for manual leveling are…
I have not seen a simple drip mount that I can leave inside the printer to drip at a tilted angle, handling a big volume. It is all free to download and modify. Try to print with tough resin with less cure time. It needs to bend to snap…
Elegoo Build Plate is not perfectly leveled to the screen and screws adjustment ran out of room. For wider adjustment range to ensure that paper under the build plate during leveling has a bit of friction but not stucked, this washer…
I needed a 45 degree vent adapter to vent out of the back of the printer but not get in the way of the lid when opened as it takes quite a bit of space behind the printer to do so. I designed this to have a good insert fit into the…
A follow on of the 75mm vent adapter. I needed a 45 degree vent adapter to vent out of the back of the printer but not get in the way of the lid when opened as it takes quite a bit of space behind the printer to do so. I designed this to…
this is the fixture that i use to hold the print plate of my elegoo saturn 16k so that i can scrape the prints off.
Print bed holder for draining resin This screw-on print bed holder was specially developed for resin 3D printers and is used exclusively for securely attaching the print bed so that excess resin can drain off in a controlled manner. It…
Simple 80x80x8mm box with beveled edges meant to be a good size and height as a spacer when installing new PFA/FEP film. Designed for the Elegoo Saturn IV Ultra/16K, But should be well enough for other 10" resin printers. I made mine out…
Designed this fan adapter for my S4U. It is sized for a standard 80mm PC fan which fit very well over the printer's 75mm exhaust port. The fan adapter mounts outside the printer, bolting through the mounting holes into the optional…
I had designed one of these for my Peopoly SLA printer and it works great so I designed one for my new Elegoo Saturn 4 Ultra 16K. It just stacks together. You can glue it together if you like but I made it so that the tongue and groove…
The machine of the USSR 1 Collection | Verts:524,748 |Faces: 519,546 | Tris: 1,045,237 | Objects: 106 Ready for comments) готов учиться вместе с Вами I am ready to study with you)
UPDATED - The new version has a slot cut out to fit the updated 16K build plate (the one with the ears) and I am including a mirrored copy in case you want it to hang in the other direction. I built this remix up from scratch. I have…
