Counting matching models…
Hello everyone, Token holder remix for Paleo found on Thingiverse (by Lubi90 April 12, 2021) I have changed the place for the dice so that the dice 18x18x18 can now be stored (e.g. Polish version of Paleo Boardgame have dice in that…
VESA 75x75 adapter for the small arm system from RostaP's Multifunction Arm mounting system. The adapter can be screwed onto any 18x18 M4 holder piece using 4 M4x12 screws, then attached to a VESA 75x75 device (also using M4 screws). I…
Pour impression en TPU. La version avec support GPS est prévue pour un GPS de dimensions: 18mm x 18mm x 8 mm
Remixed the mount for a smaller GPS Category: 3D Printing
Orientation of the Walksnail M181 will be CW0FLIP in betaflight for correct compass orientation. Make sure to follow Betaflight's magnetometer calibration before flight to ensure GPS is set up properly. No extension: Won't have the extra…
First layer test model for A1 Mini or any printer with 18x18cm build plate. Model drukuje sie niecałe 20 minut na A1MINI,więc to mało czasu a można sprawdzić swoją pierwszą warstwę.
Printmaterial: PETG Settings: 15% infill 0.25 mm layerhight Supports: Yes, as shown in the picture Printer: Prusa mini + Printtime: ca. 3h 30min ------- HAPPY PRINTING :-) ------
IKEA Skadis mount for the small arm system from RostaP's Multifunction Arm mounting system. This is a remix of the screwless version of LayerCake's IKEA Skadis Xbox One Controller Holder , modified to mount to any 18x18 M4 holder piece…
printed on Prusa Mini, so it is 18x18x18. It is 5 walls (base) and several caps you may choose or you may print only “cap” files and assemble as you wish
PRINT THIS IN PETG, OR AN EVEN MORE STABLE PLASTIC It's up to you to decide if you want to take the risk of using a printed feature in your pet's environment. This is in theory safe, and I've had happy salamanders using it for over a…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
This is a square hook for a square tubing of 16x16mm I first printed it in PLA+ but I suggest PETG or stronger for heavier object as PLA is rather flexible Print it with 100% infill
And don't forget : “Don't put a GPS on a KD please. But still it's there for some reason.” :-)
A cold air return vent, sized for 18x18 inch openings.
Montageplatte zum Anschrauben eines iPad-Halters
Parametric lid for an 18x18 inch terrarium, designed to print in 9 pieces that puzzle-lock together. Fits printers with a 256mm bed or similar. Printed pieces - 1x center section (holds the 8x8 panel) - 4x side sections (hold the 4x8…
These connectors can be used to connect 18x18 mm square pipes and make book shalf esy.
This is a universal GPS mount designed for standard 18×18 mm GPS modules. The mount uses flexible screw-on legs so it can fit a wide range of drone frames and still hold the GPS securely in place. The flexible design helps the mount bend…
We are now also launching the new ToniePLAY games for the Toniebox. As these games contain lots of small parts, cards, and the disc, a suitable storage solution was needed. Thought out down to the last detail and probably a little…
