Search results: 19x

Myuto Flick 19X - Working Toy Gun - Rubber bands slingshot gun

Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)

Follower glock G17, G17L, G19, G19X, G26, G34, G45

Follower glock G17, G17L, G19, G19X, G26, G34, G45

FPV Drone Landing Feet [19x19mm] (eg: for the Rekon 10 Pro)

These TPU landing feet are custom-designed to mount under each motor on the Rekon 10 Pro frame, providing durable skids for smoother landings and protecting the frame during takeoff and landing. Each foot/skid has 4 mounting holes to…

Improved magazine clip (rubber band powered) for "Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)"

Thanks Many thanks to @myuto_675467 for not only making this design, but allowing this Labs category version of it that allows remixing. Original open-source CAD files are over there: Why this listing? The problem with the printed springs…

SLV6 Magazine Speedloader - optimized slide (for Glock 19X)

An optimized slide for Glock 19X (remix)

AtomRC Dolphin Motor Mount 19x19mm

The AtomRC Dolphin motor mount is pretty weak, and barely glued in. This mount replaces the stock wooden one, with an insertable mount. There is an included 19x19mm plate which attaches via m3 bolts and screws into nuts on the mount. Best…

19x19mm Camera Case For FPV

19x19mm IMX415 camera case. for drones. for OPenIPC

Ball Canopy (14x14mm and 19x19mm) - 3" Toothpick Drone

A simple Ball Canopy design for my 3" Toothpick.. It's for 14x14mm (nano) FPV cam... You can put a LED insid of it to get a great effect... Print it on TPU for better results.. Updated on 06/01/2020: Added a 19x19mm Version Category: Hobby

Bowl for game of Go 19x19 for small stones

I printed with WOOD filament 0.6mm nozzle 3 perimeter walls 0.22mm layer height Random Seam Position 12% infill in Hilbert Curve painted on Supports (Tree/Organic) no brim

20x1mm (19x1mm) Disk Ammo for Toy Guns

Losing ammo for your toys is always no fun. Why not print some more? 20x1mm (and 19x1mm) Disk/"Jet Disc" ammunition for a wide array of toy guns. Most famously, the Cosmoblaster/"Blicky", which is itself a (Russian USSR-era) copy of the…

19x19mm Camera Case For FPV larger surface

I wanted to use a nut pressed in with a solder iron and was having issues with the nut eventually spinning

Camera Eyepiece M19x0.75mm

According to kamerastore, an original Nikon 2925 fits the following camera models: Nikon F, F2 (w/ DE-1, DP-1, DP-2, DP-3, DP-11 & DP-12 finder), F3 (w/ DE-2 finder), Nikkormat, FM, FM2, FM2N, FM3A, FE, FE2 & FA Fujifilm X-Pro 1, GS645…

UNW airsoft GBB version of: Unseenkiller Paragon 19X

12-10-2025 models are updated so that the slide lock cant be pushed outwards. what causes extra slide ware this can be fixed with a 0.6mm spacer if you want to update a printed frame so like mentioned before it's best to use the cut out…

FT mighty mini firewall 19x16 and 16x16

FT mini firewall for FT mini power pod. Supports 19x16 mm and 16x16 mm motor mounts (most 2205 - 2306 sizes). Three thicknesses to choose from 2, 2.5 and 3 mm. I think 2.5mm is a good happy medium size- works well with my FT Arrow. Large…

Tape Cutter 19x33mm

Hello I have re-created a tape cutter for the normal size tape 19x33mm Enjoy =)

OpenIPC Thinker 14x14 camera covert to 19x19mm mount dock add ND filter dock

OpenIPC 14x14 camera covert to 19x19mm mount dock add ND filter dock

Organizer Box (BoxBin 19x38)

I needed to add more smaller items and i just cut the insert box in Half BoxBin 19x38

Low Profile Fan Casing for Papst 119x119x38mm AC Fan, 100mm Tube

Low Profile Fan Casing for Papst 119x119x38mm AC Fan PAPST 4890 N 230V 11W, >70 m³/h., <25 dB

19x19 AtomRC Dolphin Motor Adapter

An old design that i've made, to install a bigger motor on my dolphin wing. Used Esun PLA+ with 100% infill. Strong materials are recommended, even if I didn't have any issue with it braking. Also add some glue to the back, the small…

098 Vorsicht: Spielende_Zahlen Domino 19x19

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Blumen-Untertopf-eckig_219x219x9,5mm

Mein Drucker: Ankermake M5C Ich habe den Untertopf mit folgenden einstellungen gerdruckt: -Material PLA+ -Düse 0.4 mm -Unter Linienbreite alles auf 0.6 mm erhöht, sicherlich kein muss aber es ist so stabiler. (Siehe bilder) -Schichthöhe…

filter for skimmer 19x19mm

filter for skimmer 19x19mm. The files then contain grids with holes of 2x2mm, 2.5x2.5m and 3x3mm

Vase 19x5cm

Best to print in Vase mode

Gridfinity Modular Magnet Storage System - 19x9 Rectangular REMIX

This is my remix of the fantastic Gridfinity Modular Magnet Storage System originally created by @codysechelski. I needed a version that could securely hold some larger, more powerful rod magnets I had, so I adapted the design…

Go mod 19x19

Goki 56916 A thing to hold the stones in place to "save" your game score. Go Game: https://www.amazon.de/gp/product/B000NHOFBA/

Carl Zeiss Jena Microscope objective adapter from M19x0.75 to M27

GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…

Simple 19x19x1.5 Endcap

19x19x1.5 Endcap Category: DIY

Parasol end join repair 19x12 spoke

My parasol has rubbed against a wall causing the cloth to fray and the spoke protrude through. The spoke end-cap is designed to sit inside the cloth pocket that the parasol frame/spoke sits in. It reinforces the socket (patching any…

Iceland Topographical Map Puzzle 19x13

Re-upload from my 2021 model on Thingiverse . I got bored over the last year, so I decided to make a puzzle using a topographical map of my favorite travel location Iceland . This puzzle consists of 247 pieces that, when printed at…

horizontal blinds mount (uchwyt na żaluzje)(19x25mm)

My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…

M10 mini GPS 19x19mm basic model FPV

This is a basic model to help you create mounts or check the sizing. The GPS I used is the Cyclone M1018C Mini. You can buy this exact module here . If you're using this model for another 19x19 GPS, consider scaling the model up a bit, as…

M19x2 Rotary tool cap

Lost my endcap for my VonHaus rotary tool. is an M19x2 pitch

Ikea Skadis LED Enclosed Light Bar Clip 19x18.5mm

Description The original 19 x 18.5mm clip would drop my light bar when I bumped the table so I enclosed the clip to make it more secure. My lightbar: amazon.com/dp/B0DMWHNJ42?ref=ppx_yo2ov_dt_b_fed_asin_title I printed with 100% infill…

Ball Canopy (14x14mm and 19x19mm) - 3" Toothpick Drone

A simple Ball Canopy design for my 3" Toothpick.. It's for 14x14mm (nano) FPV cam... You can put a LED insid of it to get a great effect... Print it on TPU for better results.. Updated on 06/01/2020: Added a 19x19mm Version Category: Hobby

Myuto Flick 19X - Working Toy Gun - Rubber bands slingshot gun

⬇ Files for download are available on Files → Other Files → Flick 19X Files. All project files are in .zip archive ⚔ Toy guns are back. ⚔ ⬇ Files for download are available under the Files tab. All project files are in .zip archive Flick…

Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)

⚔ Flick 19X - Print-Friendly Toy Pistol ⚔ 📦 The Project Files: Inside the ZIP archive, you'll find: Pre-oriented STL files ready to print Assembly manuals in both English and Russian My OrcaSlicer settings for optimal printing Free…

Carl Zeiss Jena Microscope objective adapter from M19x0.75 to M27

GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…

Improved magazine clip (rubber band powered) for "Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)"

Thanks Many thanks to @myuto_675467 for not only making this design, but allowing this Labs category version of it that allows remixing. Original open-source CAD files are over there: Why this listing? The problem with the printed springs…

horizontal blinds mount (uchwyt na żaluzje)(19x25mm)

My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…

Fann 19x140

Fann 19x140

M12 14x14 sensor, 19x19 format lens holder

Important notes! PLEASE ADHERE TO ALL GUIDELINES TO GET TEH BEST OPTICAL RESULTS Print narrow side (lens side) down on the printed Use ironing on all top surfaces Add organic auto supports Layer height: 0.1mm Use m2 heat inserts, 3mm tall…

Stackable sieve 219x219mm (1mm, 3.5mm, 5mm or custom by yourself)

Hello there, me again :) I have been working on a concept of modular sieves for few hours now and just wanted to share. in my files you will find a base, which is the main part where you connect the mesh with m4 bolts and nut from the…

19x19 fpv cam board to m12 lens adapter

print at 0.1mm to 0.05mm layers

Cable Clip for 19x19x1,5mm Frame

Cable Clip for 19x19x1,5mm Frame Category: DIY

19x19x1,5mm Frame Connector

19x19x1,5mm Frame Connector Category: DIY

Frame Connector 19x19x1.5mm

Frame Connector 19x19x1.5mm Category: Parts

Uruav ur85 pusher V2 - plus 19x19 cam edition

Take a Uruav UR85 (or any other 85mm tiny whoop), print my files ad made a pusher! The Vtx support is also the base of the quad. New version! I've made a support for the HD cam. I couldn't try it because I don't own it, so send me your…

Dual mount with hole for larger switch - 19x12.5

I accidently purchased the wrong switches for this project, and for some reason the mini switches are hard to find in Canada, so I redesigned the switch side to accept the switches I bought. Here is a link to the switches just in case you…

"plate" for IKEA BÅS display case (19x5cm)

Made this for my IKEA bås display case to put my thimble's in Just a normal 19x5 CM plate

Light switch holder 19x13 mm

Holder for light switch 19x13mm of LED

1/4'' bit driver with bearing (19x6x6)

Not the most creative design but does the job perfectly. 1/4'' bit driver, with a bearing to make it easier to twist those stubborn screws, such as with printed builds or my kids toys. Bearing used is a 19x6x6 which was salvaged from an…

AMMO CASE 9MM (119X)

Ammunition box designed for 119 ammunition, can be printed on any printer, without the need for screws.