Counting matching models…
Small box with lid that holds up to 30 1oz silver bars that do not have the plastic casing from the mint. (I'm very new to 3D modeling, so be kind and don't crush my spirits with this design.)
Dispenser for 1oz / 30ml medicine cups. Model is oriented as it is intended to be printed, upside down. No supports should be needed. Use double sided mounting tape to mount to a wall or mirror. I included the Fusion 360 file, have fun. I…
I was looking for a good strong box to store 1oz silver coins and I came across the excellent Ultimate Parametric Rugged Box by zx82net. This remix of the helpfully provided blank fill provides a suitable insert to hold x15, 1oz, silver…
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. doesn't need to show it with…
Clips your sanitizer to various thing like key rings or backpack loops etc. Print instructions 100% infill - .10mm or .20mm - 3 Perimeter walls - Supports Everywhere
A nice easy way to store your 1oz 38.5mm bullion coins within coin capsules. This tube can hold up to 5 coins. The lid is friction fit and overall work's perfectly. If you would like a larger (i.e more coins) storage tube please message…
1oz Silver Rounds Container Holds 20 Print Settings Printer Brand: Bambulabs Printer: Bambu P1S Rafts: No Supports: No Infill: 15% Filament: Bambulabs PLA Any Notes: Standard wall thickness Arachne wall algo or characters may not be as…
Resized for standard silver 1oz coin. 3mm for mint coins 2.65 for decorative coin (no face ridge)
A simple caddy to hold 4 - 1oz Bob Smith Industries (BSI) super glues, 2 - 2oz accelerators, and 4 glue tips.
Needed a smaller holder so I cut and combined the pieces to make this.
My pantry cabinet is just deep enough to where the spices always seem to congregate right at the front, just in the way of the can of soup you want. Since there is always this small amount of space why not mount them directly to the door…
Silver 1oz coin 39mm capsel stacker 6 pieces Filament-PLA https://buymeacoffee.com/gttelewizortv
There were other models for other variants of the Bob Smith Industries glue, but not for the one I wanted. Now it exists! Store your 1oz BSI CA glue and 2oz insta-set in a 1x2 bin
My silver rectangles are 47x27x2.3mm and I left 1 extra mm of clearance in each direction so I can easily put them in and take them out. I provided multiple shapes and sizes and modeled it in a way that would make it easy to modify. I…
Hello, Sharing my project of storage case for 20x 1oz silver coins in protective case. Internal diameter is 46mm and 7,5mm thick slots, so it's going to fit majority of 1oz coins like Britannia, Krugerrand, Philharmonic, Maple Leaf,…
This is a pusher that keeps the veggies you want to ferment “under the liquid”. It fits this IKEA glass container (same all over the world). Extra - I decided to punch a little hole in the plastic cover and install a vent - so air can get…
Hello, Sharing my project of display stand/holder for 6 silver 1oz coins. Holes has diameter of 46mm and are 6.5mm deep, so it should fit majority of bullion coins in protective cases. On the photo you can see Lunar series that fits…
Hello, Sharing my project of storage case for 25x 1oz silver coins. Internal diameter is 41mm and 3,5mm thick slots, so it's going to fit majority of 1oz coins like Britannia, Krugerrand, Philharmonic, Maple Leaf, Silver Eagle, Lunar…
This model like most I have made so far is born form necessity, we currently use ‘Disposable’ shot glasses to give samples of products to visitors. Wanting to cut down on waste(binning every glass after use) we wash them to allow them to…
Hello, Sharing my model of display stand/holder for 1oz silver coins. It's made to fit the coin in protective case - cut for coin is 7mm deep and made for 46mm radius. 🚀 Want to sell prints of my models? Subscribe to my Patreon for only…
3D-Printed Insert – Functional Design Overview The internal insert has been purpose-built using 3D printing to convert a standard Perth Mint coin box—originally designed for smaller denominations—into a precision holder for 1oz Britannia…
Designed to fit the Agoro Trading Coins range. Print in a colour that matches your set :) Fits the cards 'loosely' as I designed it for longer term storage with the velvet pouch. fits semi-snug with the velvet pouch.
Just a quick thing I threw together to reduce the sound my carabiner makes when I'm in quiet environments and don't want to make as much noise from drinking water. Fits the 21oz LTT water bottle just under the lip/lid. Print in anything…
Hello, Sharing my project of protective case for 1oz silver coins. There are 2 versions - 39mm (fits majority of popular bullion coins like Britannia, Maple Leaf, Philharmonic, Krugerrand) and 41mm (fits Silver Eagle, Lunar series coins,…
This is a holder for 1oz plastic containers for loaded teas, but it can be used for anything that needs up to 4 1oz holders
21oz and 64oz versions are in the works, check back in a bit! My LTT water bottle was a bit too loud for me when setting it down on a table. This bump sleeve not also quiets it down a lot but also protects your hydration container from…
The challenge is the Perth Mint Rectangular coins dont fit nicely into the standard Air-Tite Rectangular Coin Capsule Holders . So I built a print to go around it to allow it to fit nicely into the capsule. The size I have for the Perth…
Resized for standard silver 1oz coin. 3mm for mint coins 2.65 for decorative coin (no face ridge)
A simple, compact storage box with lid designed to hold up to 16 assay cards (TEP) for 1oz gold or silver bars or coins . The box footprint measures approximately 100 mm × 104mm , making it compact and easy to store in safes, drawers, or…
A simple, compact storage box designed to hold up to 16 assay cards (TEP) for 1oz gold or silver bars or coins . The box footprint measures approximately 70 mm × 99 mm , making it compact and easy to store in safes, drawers, or lockboxes.…
Designed to fit the Agoro Trading Coins range. Print in a colour that matches your set :) Fits the cards 'loosely' as I designed it for longer term storage with the velvet pouch. fits semi-snug with the velvet pouch.
Sauce is good. At times, a 3D scan of a 1oz sauce packet is required for design reference. This I have created for you to enjoy! NOTE - This is a rough scan, we may scan higher resolution later but this is good enough for now.
English This 3D printed holder is made for your WD-40 can (382ml/11oz) and fits right into the Honeycomb Storage Wall system. It’s super easy to print and put together, keeping your can safely in place. Español Este soporte impreso en 3D…
A simple, compact storage box with lid designed to hold up to 16 assay cards (TEP) for 1oz gold or silver bars or coins . The box footprint measures approximately 100 mm × 104mm , making it compact and easy to store in safes, drawers, or…
A simple, compact storage box designed to hold up to 16 assay cards (TEP) for 1oz gold or silver bars or coins . The box footprint measures approximately 70 mm × 99 mm , making it compact and easy to store in safes, drawers, or lockboxes.…
Dimensions: 60.4mm wide × 20mm tall × 250mm long 25 slots , each 56.4mm × 6.2mm (5.6mm capsule + 0.3mm clearance each side) 3.71mm gap between every slot, evenly spaced 3mm end walls each side 2mm side walls each side
Designed to fit the Air-Tite Rectangular 1oz Silver Capsule . 39.6mm wide × 23mm tall × 250mm long 20 slots at 45° lean 5mm solid base plate 18mm vertical slot depth V2 Tightened pitch between coins from 11.549mm to 10.97mm reducing…
Designed for this Aliexpress 10 capsule set . These sets fit 6mm/20mm/25mm/27mm/30mm/35mm/40mm/46mm diameter coins perfectly.
Will most likely fit any other 75mm or 5.1oz cans as well. Two versions included - one with an inset pattern and one that is plain. Depending on your filament and print settings, the inset pattern may allow some air to pass through. Best…
Something I cooked up at work that hopefully will be of use to some of you. We use small 1oz cups for epoxy and UV resin. In order to waste as little of it as possible, we would prop the cups against something to keep it at an angle. This…
Coming from a Hydro Flask with the extra Sleeve/Boot i created my own quick and dirty sleeve for the 21oz bottle. It offers a little extra protection, nice contrast and dampen the sound of placing it on a hard surface. I also added a…
This is a remix of one of my models to hold 1oz cups.
This organizer fits 20oz, 10oz, and 1oz, plastic cups. The measurements are made from my own cups on hand so your mileage may vary.
Could not find a suitable 1oz bottle holder for the cyafixed glue, so made one myself. Should fit any oval shaped bottles with 36mm x 24mm dimensions
2x2 Gridfinity box made to fit the 21oz LTT Water bottle. I oversized it a bit so it should fit most other 21oz bottles There are 2 versions of the file. The only difference between the 2 is 1 has a hole in it to remove the water bottle…
