68 models
This is a protective case to suit the commonly available “1200W" 20A DC Boost (step-up) Power Supply Modules (8-60V input, 12-83V output - example ). It should also fit the “1800W” variant, but this is unconfirmed. This is being used to…
This is designed to fit the charger with the rubber feet attached so no modifications to the charger are required. I printed with some supports on the rounded edge, but they are not required if you're happy with rough edges.
My HP laptops spends most of time on the desk. So, I had to find the way to hang chargers under the desk top, that those doesn't take up additional space. That is the result, a simple hanger for HP 200W charger. If you are looking for…
I recently replaced my old, former USB charger which was mounted under a desk with the new Anker Prime GaN Charger with 200W. Therefor I created two brackets to mount this charger under a desk with 2 screws each. There are two versions of…
Skadis Holder for Anker Prime Charger (200W, 6 Ports, GaN). Uses two universal pegs from here for mounting on the skadis plate: https://www.printables.com/model/635620-skadis-skadis-universal-peg/remixes
Primarily designed to be used with the AE1200/AE1300 platform of watches but could really be used with any ones that could fit these adapters. I've included files for compatibility with 1.8 and 2.0mm spring bars as I won't lie I don't…
A Simple holder for the Anker Prime Charger 200w https://www.anker.com/eu-de/products/a2683-anker-prime-ladegeraet-200w-6-anschluesse-gan?variant=44805273944227 Charger can be place up or downside. !UPDATE! Updated the model to v2.…
Simple under-desk mount for this excellent charging brick
reduction/pass through the enclosure wall for example for this heater: https://a.aliexpress.com/_mPlGPcS I didn't want the heater touching the wooden wall. So I created a reduction and at the same time a passage through the wooden wall.…
ausdrucken und freuen weil ihr sowas von mir bekommen habt ;) und MR60 Steckerhalterung Konstruktion & Aufbau des Antriebs 1. Der grüne Propeller & Impeller-Kanal Propeller-Geometrie: Du hast einen mehrflügeligen (3 blättrigen) Propeller…
Project Summary iHeater is a compact and affordable solution for 3D printers without an active heated chamber or with limited motherboard connectivity. It’s especially useful for printers with proprietary boards that don’t have extra…
You have to bend the thing in half to sick it in there, what are you gonna do? It fits nice and snugly, so much that I didn't even need to line up the M3 screw holes. pokemon font!!!! you'll probably want to attach a fan somehow if you…
Anker Prime Charger (200W, 6 Ports, GaN) bracket. Or Minecraft character's bra? You decide. If you're looking for a bracket that can hold a charger behind a table, but I also need to be able to remove it easily when I need to - this one's…
I have not found any mounting solution for this charger that I liked so I created my own. It should be assembled before charger is inserted. There is a gap between holder and the surface where it is mounted to. This way the TPU part will…
Use tree supports on case. No supports needed for desk mount.
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…
A holder for a charger. You've seen the title. I recommend using single piece snaps . Also openGrid "full" since this charger is an absolute unit.
FreeCAD 1.1 sources included. List of materials: Female XT60 panel connector Male XT60 panel connector 4x M4x8 screws 4xM3x20 screws 4xM3x8 screws + nuts for connectors For 1200W module: fan 4020 (1800W sells with a fan included)
ESRack style flexible rackmount for the Anker Prime USB charging stations , which is perfect for powering multiple USB devices within the rack ( rack mount Raspberry Pi cluster ). Works with 19" and 10" ESRack rackmount ears . Added a…
The Case is for 1200W Boost Converter / StepUp https://www.aliexpress.com/item/1005003780486081.html?spm=a2g0o.order_list.order_list_main.91.24e818029iu5jy
2.5U 19 inch rack front panel mount for Ugreen Nexode CD271 200W USB Charger These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
Best printed with Snug Support Auto in upright direction. Sides act as spring clips, might get different performance in different materials. Print shown is with PETG-CF. Works perfect.
Overview Reclaim your workspace and secure your powerful Ugreen Nexode 200W (4-Port) charger with this meticulously designed, low-profile bracket. Whether you want to mount it to a wall, under a desk, or to the side of a workbench, this…
Support sous bureau pour alimentation uGreen 200W
I picked up an ISDT BattGo BG-8S Battery meter and wanted a way to mount it on the battery so I designed a case for it. This is meant for a SLM24 LIFEPO4 24V 50A 8S 1200WH BATTERY from JAG35.com…
A simple mount for a UGREEN Nexode 200W mount for under a desk. I'm uploading this on the off-chance someone else wants to make use of it. The screw mounts are "in-line" with the power plugs. I did this due to space limitations. I mounted…
Could not find a standard don rail mount for the MeanWell PSU. Fusion file included Parts Needed 4 x M4 x 6 heat inserts 8 x M4 x 10mm Button Head Screws
En This holder allows you to securely mount the charger underneath a desk or table, keeping your workspace clean while maintaining easy access to all ports. Two versions are included: 2.0 mm wall thickness 3.2 mm wall thickness –…
power supply (https://www.aliexpress.com/item/1005004886963358.html) M12 cable gland (https://www.aliexpress.com/item/1005003263360717.html) XT30 connector 2 pcs square M3 nuts (to be inserted in pause) 2 pcs M3x6mm bolts
I would print out of high temperature filament like PETG or carbon fiber. I'm thinking about adding an attachment point for a fan as the power supply gets very hot. My first print was out of CF PLA and it ended up warping.
Coil the power input and USB cables to clean up the clutter at your charging station. Print in PLA or PETG without supports.
power supply (https://www.aliexpress.com/item/1005004886963358.html) M12 cable gland (https://www.aliexpress.com/item/1005003263360717.html) XT30 connector 2 pcs square M3 nuts (to be inserted in pause) 2 pcs M3x6mm bolts switch…
Case for LED power supply 200W dimensions power supply 199 х 98 х 43 mm
After years of wearing a Casio watch I've developed an allergy to the stainless steel caseback (Nickel) so I made this cover. The frame fits on over the stock caseback and holds a piece of adhesive vinyl (car wrap) to cover the back of…
Why did i build it ? I needed a powerful, portable lab power supply with modern USB-C capabilities. Long story short, looking at the market, there just weren't any good options that combined heavy-duty variable DC output with modern Power…
Clip on mount for SQ200W PRO LED with lever for easy removal, has 2 screw holes for a more secure mount but I just used double sided 3m vhb tape and its holding just fine. SQ200W Pro LED | Photontek Led Products | Led Lights | Led…
Mount for Satechi 200W 6-Port USB-C Charger Tired of your “shared” charger mysteriously migrating to your kid’s room… or vanishing into coworker pockets? This 3D-printed mount turns your Satechi 200W USB-C charger into a semi-permanent…
Mount your Anker 200W charger securely under a desk or shelf with these 3D-printed brackets. The first one is normal bracket, and the second one has "teeth" that keeps the charger from sliding backwards. The holder is intentionally taller…
Easy to print enclosure for connector (Wago like) for two cables of two 1.5mm² cables. Like the ones used in lampshades. This is to protect the wago for direct rain and dust for outside. I used it for low voltage leds and have no…
tieto držiaky služia na uchytenie externeho zdroja pre tlačiaren na jej rám. ja som to planoval na prerabku na MK2,5 bez výmeny zdroja. tento zdroj mal ovladat HOT end a HOT BED
Print ABS or ASA
I've dropped our Bosch MK3501M food processor which broke the gear/coupler on the base of the machine so designed a new one. I've printed it with PETG with 100% infill but haven't tested the durability of the part yet. I can imagine that…
There are guides online about what pins to bridge to turn these PSUs on. https://www.ebay.com/sch/i.html?_nkw=HP+499250 https://www.ebay.com/sch/i.html?_nkw=HP+512327 https://www.ebay.com/sch/i.html?_nkw=HP+643933
Simple Mount/Holder for Chitu Systems 200W Chamber Heater Remote with two M3 Mounting Tabs.
Крышка для отсека батареек Hugo vapor rader eco 200w, крепится при помощи плотной посадки.
This two-part holder neatly stores your Philips DryCare Pro 2200W hair dryer inside a mirror cabinet. One part attaches to the cabinet’s to hold the standing holder in place. The result: a tidy, space-saving storage solution with no…
If you decide to print you will need: 4x 2.2x9.5mm screws (for mounting the board) I printed the case with 0.4mm nozzle and pla filament.
I made this new air filter assembly since the original required you to unscrew a bracket every time you wished to clean the filters and as you might imagine these things are often located in cellars or other dusty compartments and as such…
Model for Anker Prime Charger 200W which can be hanged on the doors of cupboards. Model can be printed without supports. Created honeycomb pattern on the sides of holder to allow for better heat dissipation.
holder for the 200 watt charging hub for the DJI Matrice 4 series battery. the batteries lock into the hub and holds the charging cables in the correct spot to clip in the batteries and the batteries wont fall out. ideal printing…
I just remixed it to fit the two wholes off this cheap chinese LED driver for 200W / 24V
A cover for the phone location of the SoundVision SV200W.
### HP 200W Power Adapter Holder (PowerDock) A sleek, functional, and sturdy holder designed for HP 200W laptop power adapters (common with HP Victus, Omen, and Pavilion Gaming series). Keep your power brick off the floor or organized on…
There are guides online about what pins to bridge to turn these PSUs on. https://www.ebay.com/sch/i.html?_nkw=HP+499250 https://www.ebay.com/sch/i.html?_nkw=HP+512327 https://www.ebay.com/sch/i.html?_nkw=HP+643933
Could not find a standard don rail mount for the MeanWell PSU. Fusion file included Parts Needed 4 x M4 x 6 heat inserts 8 x M4 x 10mm Button Head Screws
Simple Mount/Holder for Chitu Systems 200W Chamber Heater Remote with two M3 Mounting Tabs.
The Case is for 1200W Boost Converter / StepUp https://www.aliexpress.com/item/1005003780486081.html?spm=a2g0o.order_list.order_list_main.91.24e818029iu5jy
I have created a mount for a GaN 200W charger. The special thing about this is that it can be easily opened and the charger can simply be removed. You will need: 2x M4x30mm screws (housing) 4x M3x30mm screws (lugs) Ich habe eine Halterung…
you need to tap the base aluminum enclosure I just found this on AliExpress: US $9.12 | Aluminum Enclosure 125*51*110/150/160/180mm Split Case Electronic Project PCB Instrument Black DIY Power Supply https://a.aliexpress.com/_okLE5EL…
This charging station is designed around the Anker Prime 200W Charging Station. It has a drawer to store charging cables. One charging bay accommodates the Anker Prime 27,650mAh Power Bank, and one Anker 633 MagGo Power Bank (10k). Others…
My wife asked me to tidy up our office desk, as she didn't want to see the computer charger and cables lying around all the time. So I made a support for the laptop power supply that screws under the desk with 3 x 10 mm wood screws and…
https://www.amazon.de/dp/B0DL59GWWK?ref=ppx_yo2ov_dt_b_fed_asin_title
Wall mount for Anker Prime Charger 200w 6 ports GaN, model number "A2683", has two holes for screws and space for tape. Great charger, now more organized! Print shown on the pictures was performed in PLA, 0.8mm nozzle with 0.48mm layer…
If the default stand's stem is too tall for you, this screw will allow you to mount the microphone directly to the base.
I designed this clip to organize HP Zbook power cable. Some cable scratch (15 to 20mm width) is required.
![Bracket for Anker Prime Charger (200W, 6 Ports, GaN) [updated]](https://media.printables.com/media/prints/1146034/images/8741904_6119ff81-ef24-4477-8919-debf137603cb_e0dc01f9-4a81-4be3-8a19-124d49f46087/img_2330.jpeg)
![WOODWERD Anker 200W GaN [HX-P16] Mount](https://media.printables.com/media/prints/1147979/images/8665702_a8c10981-5dcb-4acb-8a3f-7a6345d911ab_5859d0ee-8d2a-4e69-877d-eb72f9e63193/anker200wgan_asm-v3.png)
