702 models
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
This holder can contain 8 individual cr2032 batteries. Printed on a Prusa Mini in Orange Prusa PLA (Not Prusament) Part of the Gridfinity storage solution. What is that you say?
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
The tray holds a total of 16 AA batteries, 16 AAA batteries and 4 CR2032 batteries. Print instructions The tray should be printed upside down to get a fine top side. Glue the bottom plate into the holder with some glue.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This CR2032 holder was designed around two interlocking half-twist hex helices to provide an interesting look for this functional print. The inner tray slots hold twelve CR2032 batteries securely preventing the batteries from falling out,…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
About: I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs. Can be used with 6x2mm round magnets used in gridfinity sets. Big hole diameters - the one on the top…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Update 28.07.2024: Made two new versions according to my new parametric sliding box design, one for two CR2032 batteries, and one for https://www.printables.com/de/@plaid_brad_1260466, who is in need for a case for 2xCR2032 and 2xCR2450.…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
For the controller on the gate.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Simple battery holder for storage of twenty (20) CR2032 coin cell batteries, commonly used as PC BIOS/RTC batteries, Apple AirTags, remote controls, and other electronics. Also can hold thinner CR2016 batteries in a pinch, which is why I…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
🇬🇧 This a small foldable CR2032 battery case. You can fit 10 batteries inside. Printed in 0.2mm with 15% infill (orientation as shown in screenshots). Doesn't need any support to be printed. Fusion 360 file included if you want to make…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Simple adapter ring to fit CR2032 batteries inside of CR2430 battery devices. Simply push the battery inside the ring (snug fit) and place it inside whatever device you want to use it in. Both batteries are 3V so there should be no…
Since CR2032 is commonly available and cheap, I just packed together an easy adapter that fits nicely into V1 Hue Switch. Build with PrusaSlicer only ;) No supports, infill doesnt matter, material as well.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Housing for CVBS/AHD camera of Mercedes Benz license plate lamp. You can use this adapter / fixture for camera, which comes with android auto headunits, as replacement of original transparent plastic in licence plate light or combine it…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Tisk na dvě poloviny, podpěry jsou nutné, tryska 0,4, PLA.
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
CR2025 and CR2032 box
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This box is designed for 16 pcs of CR2032 and 8 pcs of CR2025 batteries. Thanks for the nice design of the box.…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for PETGSource material: PET
Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4.
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
This is a spill collector for the Demoka M-203 coffee grinder. It will collect coffee grounds that spill on the side of the portafilter when grinding espresso beans. Print instructions Print it in upright position, with brim and removable…
Print approx. €8.62–€10.54 excl. taxPreliminary estimate for one variant
The latest preliminary Prusa Slicer release 2.6 allows you to add embossed and engraved text to your entity. So you place your telephone number and the dogs name on the front and back of the tag in the slicer. The slicer also allows you…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
After moving to a new apartment I realized I had lost the original base plate of an IKEA Ostana V1203 lamp. The lamp is an old model, knowing IKEA it would probably be possible to get a replacement part, but that would surely take longer…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
You can find both lid with “CR20XX” text or version with no embossed text. Magnets used are 5x2 mm. You do not need them to glue (you can) but you can just press them in with force. 20pcs version Lid: 125,5x33,5x11,5 (mm) Base:…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
This is a fishing reel repair part for getting the line winder working on an Okuma Coldwater level wind reel - Model CW203D. Okuma part #: 17070009 UPC#: 8400834225 Part name - Transmission gear. This is a model for a temporary repair. It…
A battery dispenser for the IKEA Skadis board. It holds both small LR1130 and bigger CR2032 batteries. Possible improvments: Currently it's a bit tricky to get out one battery - especially the small ones. Maybe an angled lip that pops out…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Summary This was a quick and dirty wedge for mounting my 28" monitors above my LG OLED. I did some math to determine that from my sitting distance (~4ft) and the height that I'm mounting at (a little over a foot above seated eye level) to…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
CBR2032 holder for pallets for miniwarehouse
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Holder for a CR2032 coin cell batteries. Battery is securely held in place Single (3V), double (6V) and triple (9V) versions Designed for use with breadboard jumper/dupont wires or bare wire Total holder thickness is 7.3mm for the single…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
LEGO Technic Mining Truck #42035 Model doporučuji tisknout zvětšený na 200 - 300 % PLA - 15% výplň Pneumatiky - TPU
Minor redesign of jbergmans' 2032 battery storage. Can hold up to 8 batteries of types CR2032 and CR2025. Also see my model for CR1225 batteries: https://www.printables.com/fr/model/874743-cr1225-battery-holder Very easy to print, small…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
I love the beer crates for storage! My button cells needed a new home, so I remixed again :-) This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse. I made some changes to the original…
A 2x1 Gridfinity module to store multiple coin cell batteries (2016, 2025 and 2032)
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
A small holder for a 5 mm LED and a CR2032 coin cell. Snap the pieces together to make a simple, battery-powered tea light. No glue or soldering needed. Print it upside down, no support needed. TIP: flickering LEDs are available and would…
Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CD2032. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…
Lego Technic 42036 set - Silniční motorka 375 dílů Model doporučuji tisknout zvětšený na 200 - 300 % PLA - 15% výplň Pneumatiky - TPU
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Pre-colored .3mf file included. Best to be printed in wall…
Since there is a battery holder design contest going on, I thought it may be useful to have a reference model of a CR2032 battery for which holder can be created. The model is measured from an Energizer CR2032 battery. Model can be…
Holder for digital / vernier caliper. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Hex…
Storage Box for AA/AAA/CR2032/9V Battery or /SD/Micro SD/or small parts 3 Type of lid type 1 full closed no stakable option no inscription type 2 for stakable option no inscription type 3 for stakable option with inscription infill 10 %
Printed with Prusament PETG Jetblack 0.3mm no rafts or supports required.
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Update 20240531: Fusion 360 file uploaded for customization. Battery name text could also be changed in PrusaSlicer by cutting the old text away and using PrusaSlicer's text command. Storage case for CR2032 batteries. Sliding lid allows a…
Simple CR2032 coin battery container.
Remix of container for CR2032 batteries.
Just a simple 2032 battery holder, holds 10 batteries
Fingertip mod for Logitech G103/203, inspired by OptimumTech's Zeromouse. Changed some things to allow usage of side buttons, scroll wheel and clamp for strain relief. Total weight is around 40g with PLA. 35g for side-buttonless version…
It's a simple fan cover for the Creality K1 Side Fan. The Fan is a 12032 Radial fan. The cover is pressfitted onto the fan. There are 2 & 5 mm thick versions available.
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
I've always wanted to use this kind of coin cell battery holder for a project, and finally the time has come.. I am sharing only the battery part since my top secret project is on its early development stages. Hope you'll find the battery…
This model is compatible with the lego system.
Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill
Added CR2032 Text works also with CR2025
Inspired by this design by arcaneoctopuslab: https://www.thingiverse.com/thing:4907153 I really liked the simplicity, but his design assumed LED's with longer connectors than the ones I use, so I made my own version that could support…
32039-Technic Axle Connector with Axle Hole
added the text for the CR2032
Gridfinity bin model that is capable of holding 2032 and 2450 batteries. Combined with Multiboard Gridfinity Adapters it is multiboard compatible as well. I use them to store rechargeable coin cell batteries that I bought from amazon. If…
A remix of CAD-Guy's stackable beer crates that holds CR2032s. It's shorter than the standard crate, but I left enough vertical space to support the “hand holds” such that I could still fit a finger through. Another CR2032 remix was made…
Print the empty Bierkiste and this insert. Two of them stack on top of each other and fit inside the Bierkiste. Holds up to 20 pieces of CR2032 or smaller (CR2025 etc) coin cell batteries. Not very print-optimized yet: the walls could be…
I needed a simple and small led light base for the small prints and models I have. The easiest way for me was to modify a cheap cr2032 coincell battery operated tealight design. So I did it.. It requires soldering some cables to the LED…
Holds 5 CR2032 coin batteries in a 1x1 Gridfinity container
10 battery capacity. 1x2x3 gridfinity compatible. No magnet holes.
BOM 8× M3×14 BHCS 4× M3×8 BHCS 8× M3 heat inserts 4× 3×6 Magnet Material ABS, or ASA for best results Print Settings 0.2mm layer height, 2-3 perimeters, ~25% infill are more than enough.
CR2032 holder good for small led lamp or for other projects with battery CR2032.
Simple gridfinity 2x1 holder for 2032 battery.
Best results came from being printed in PETG.
Half-height beer crate style containers for CR2032 and CR2477 coin cell batteries. Can be used separately or stacked after gluing the stacking piece to the bottom. The CR2032 container can fit 28 batteries while the other one should fit…
This is a small clip I designed to hold one CR2032 battery and one LED. I was designed to make lighting tabletop gaming terrain easy and fun. Please consider supporting me and my work at patreon.com/augustmcdaniel
I created two models, each specifically designed for CR2032 batteries, with gridfinity dimensions of 1x1x3 and 2x1x3.
This CR2032 Battery Holder is a safe way to store coin cell batteries. The batteries snap into the holder but can be easily removed by pressing on the battery from the bottom of the holder to pop it out. There is a version that holds 10…
This model is compatible with the lego system.
This is a kit for all M203-type launchers. Pretty straightforward, and it should work across all grenade launcher brands and barrel lengths. Below I've included STLs, IGESs, and F3D files, so you guys are welcome to go nuts remixing and…
Stützen auf dem Druckbett aktivieren!
A remix of the CR2025 holder with more width to fit the slightly larger 2032 cells.
Scaled up a notch to ease up the tolerances and get the cells out easier
the battery-box is based on brass_ring 's model. the main difference is that this consists of 2 parts and can be easily assembled with 2 clicks.
This is a fake/dummy battery that allows you to use any larger battery (eg AA or AAA) instead of the low-capacity CR2032 You will need 3D print "part +" 3D print "part -" copper washer (used as "+ contact") M14x20x1 -…
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
This organizer holds 60 AA, 65 AAA, 9 9V and 22 CR2032 batteries. I used two colours because the filament ran out during print. I printed it in PLA, using lightning infill. No support needed.
This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15%…
1x1 C2032 battery holder for the Gridfinity system. Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS
Does not need any supports but does need glue. Note that the notch on the side will help you orientate the container when opening it up. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 15%
Don't want your coin cells to flip around in their slot when adding or removing batteries? Want an even easier way to efficiently use this functional and space saving design? can hold these coin cells/batteries (2 slots for each group):…
There are similar ones out there, this one is a bit shorter and has rounded cut-outs at the bottom for circular batteries. Printables | Makerworld
This is a movement holder/casing ring for the Miyota 2035 (not 2305) quartz movement so it can be adapted for a case for Seiko NH series of mechanical watches. Great for mechnical to quartz conversions or for anyone looking to build a…
Scale if needed. CR 2032: diameter = 20 mm, thickness = 3,2 mm. Please post a comment if you would like some changes.
Ranger Helmet from game Metro 2033 with openable front mask. You can use either full sized model or my precut version which has some changes (like holes for breathing in the mask), because its the one i had to print thanks to my smaller…
As I wanted a removable battery driven crystal light with an integrated switch, I redesigned the bottom half to fit my needs. (Original: https://www.thingiverse.com/thing:2461569 ) The base of the crystal is designed specifically for the…
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
This is a portable CR2032 case that measures just ~6mm thick with a top that snaps close. The button cells are held by clips. The positive and negative marking holes serve to suggest the most secure orientation to place the batteries, and…
![[gridfinity] Coin Cell Battery Box: EASY REMOVAL/ADDING with finger or wedge (CR2032/CR2016, 357/303/SR44, A23/MN21/AAA)](https://media.printables.com/media/prints/734837/images/5755001_03a129d4-d179-43cf-959a-eef3b9b9bc27_df25febc-8afd-4e3f-82dc-74820d28b85c/coin-battery-box-000-overview.jpg)
