Counting matching models…
For the mesh lens .stl or .3mf to print properly so that the insert is the through set: Top Shell Layers to 0 Bottom Shell Layers to 0 Infill Density to 25% Infill Pattern to Rectangular.
This is a posable model of the ED-209 from the movie Robocop. It is a kit and all the joints are posable. Default color of the model is grey. so if there is no color code at the end of the model name, it means it is grey. G - grey B -…
This is the final version of ED209 in 1/10 scale. Includes all the parts to make this version as screen accurate as possible. Print at .1mm to avoid excess sanding.
This is my 1/6th scale ED-209 from the original Robocop movie. I've decided to give it away for FREE. NO reposting on other sites. Consider this a Printables exclusive - else or NO MORE FREE _SHIT for anyone. Also, NO RESELLING OF PRINTS…
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
Spider-Man 2099 Inspired Helmet Enjoy Category: 3D Printing
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
A wall hook for the Lego Porsche RSR to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.
The Egg-209 design is inspired by ED-209 from RoboCop. You can rotate the model in your browser. https://a360.co/4rKVhSK I made it simple, no supports are needed for printing ✅. The model consists of 3 parts , the legs are glued to the…
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…
This is for the original version of the CW2 main body, won't fit BTTs variant.
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: This is a remix of Ed 209 from Robocop by GHathaway. Thanks for such a…
Remix to add support for the connector as well.
I know there's no Superman 2099, I just wanted to have some fun :) There's a couple of head variants with this one, one more simplified version that is more FDM friendly, and one more complex that works best with resin printers and the…
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
Maintain a unique style of Stealthburner. No screws reguired.
CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…
Commercial use is NOT allowed for this model.
Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.
This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…
It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!
Background This is a bat for throwing pottery on a wheel with standard 10" pin spacing. It is sized to fit on the Prusa MK3 print bed (though it must be printed without a skirt). My goal in making this was to create a plastic bat that is…
Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.
Needed a case for my temperature control switch (12V) W1209. W1209 are available in 5, 12, 24V (maybe more). In my case I used one common 12VDC source and connected the relay contacts to switch my (noisy) cooling fan on and off. Pretty…
Are you looking for a simple enclosure to hide your PCB? You've found one! Assembly is pretty straightforward, here's what you need: 1x Top cover (print) 1x Bottom cover (print) 3x Button (print) 4x M3x10 bolt (you can optionally use…
Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…
This is a multipurpose mount designed for the BigTreeTech EBB SB2209 USB 1.0. The EBB SB2209 USB comes with a small USB to CAN adapter. I was not able to find any suitable mounts for this small chip and thought I would try my hand at…
So I think this is perhaps is the Spiderman model you were referring too, Good luck Eric. Please do check the sizing and show of some pics of your progress if you do take it on. Cheers Jace Hey Matt here is the solid version you were…
Introducing the ultimate accessory for any Spider-Man enthusiast: the 3D printable model of the futuristic 2099 Spider-Man mask! Crafted with meticulous attention to detail, this sleek and stylish design brings the iconic hero from the…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
This allows you to use non-proprietary batteries in your Hyper Go 1620X series RC car without resorting to a Velcro strap. It also retains compatibility with the stock proprietary batteries. It will accommodate batteries up to 35mm deep…
Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…
This model is compatible with the lego system.
Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.
Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…
All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
Print using standard Voron recommended settings for toolhead components.
Vertical Wall mount for LEGO Technic Porsche 911 RSR #42096 (Spoiler UP), designed to used with Large Command Velcro adhesive strips Taking the 2 Black skid pads at the bottom helps it to sit closer to the wall You can move the stickered…
use a 6x3 magnet for the filament sensor with a standard microswitch refer to the filametrix mod for fitting the heat insert. https://github.com/sorted01/Filametrix/tree/main
DEUTSCH: Ausklappbares Temperaturregler W1209 Gehäuse. Mit diesem Schanier kann das Gehäuse ein und ausgeklappt werden. Vielleicht können es auch noch andere Leute es gebrauchen. Dieses Thermorelais steuert das Ein- und Ausschalten Ihres…
Please, print them in ABS, 4 walls and 40% infill. You don't need to change the orientation of the parts.
Ich habe hier eine Wandhalterung für Lego Porsche 911 RSR 42096 erstellt. Das Modell ist etwas geneigt und lässt sich drehen. Ich habe 4x Schrauben 4,5 x 50 verwendet. Es sieht aus als wenn er schwebt. I have created a wall mount for Lego…
This CAN bus cable retention clip is a reworked version of the v1.1 retention clip from the official BigTreeTech GitHub. I created it after finding that the original version interfered with the USB-C port and my extruder cables in a…
quick way to connect two pcb canbus to existing orbiter 2. I had to unscrew orbiter motor and put it so that motor wire comes from the top and then insert it into sb2209 due to very short cable of the orbiter. You can use two regular…
I am using this EBB SB2209 RP2040 can board from biqu and I noticed the driver tends to heat even when not using a door cover at all. the chamber was also open. NOTE: I didn't tested this. I eventually installed a g2e
Miles Morales 2099 Inspired Face Shell Enjoy Category: 3D Printing
I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board. Thank you to the work of…
Print everything 4 times, the cenperpart is optional, it has to be glued. For a more original look you can print the centerpart in multiple colors, i used black, yellow and grey.
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
No support needed. Print the front upside down. New Version buttons (V2). They have the symbol part 1mm longer for esay pressing and the bottom 1 mm shorter so they dont stop at the switch square part.
Hello there, this is an dual hose adapter for the Beko BP209H portable air conditioner. It fits perfect with some duck tape or silicone. Printed with some big printer e. g. Anycubic Chiron. Print Settings Printer Brand: Anycubic Printer:…
Print everything 4 times, the logo and the brakes are optional. The logo has to be glued. I also added the fusion360 file and a template, so you guys can create your own rim!
spider_man2099 inspired action figure
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…
This is a remix of a remix. I updated the Main Body uploaded by @MyStoopidStuff to incorporate the latest revisions from the Voron team. Please check the image if you are unsure if you need this part. The features in Red are the changes…
same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
This model is compatible with the lego system.
I'm still utterly impressed by Spider-Man Across the Spider-Verse, so here's a Spider-Man 2099 coaster and keychain set, since he was such an integral part of the movie. Change filament color above 2mm. Happy printing!
If you are using a BTT SB2209 toolboard, you will also have to print their Stealthburner motor plate, as it provides more room for the toolboard. As such, they have made available a cover for this that fits perfectly with the new motor…
Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…
Vordere untere Lampe einer LGB 2090 Diesellok Print instructions Category: Other Summary Vordere untere Lampe einer LGB 2090 Diesellok Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution:…
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…
As many others, I've encountered high temps (above 85c) on my EBB2209 toolhead board, for Voron CAN (2.4 R2 Pro machine). I'm using Stealthburner with CW2 extruder and there was no option that suited my needs, which is CW2 + 3010 (24V)…
Fit M12 gland from aliexpress. Print thread down with organic supports
The EBB card with its USB socket on the front does not allow assembly with the standard body of the Galileo 2. The pcb displayed is that of a classic SB type CAN card. The EBB SB2209 USB card not having been modeled by Bigtreetech, I did…
With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers. This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan. Personally I'm running a…
I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
Perfect model to print for having a lower temperature near the SB2209 or SB2240 to make them last longer. It also has hexes!!!!! In the near future will be out a model that uses also a small fan to keep the electronics even more frosty!
Mach E Sport 2097 3D model - Approx 5 hour print time- This design reimagines the classic 1997 Carrera S as a sleek cyberpunk machine from the future. The Mach E Sport 2097 keeps the timeless curves of the original 911 but adds aggressive…
I remixed the ventilated pcb cover for the EBB SB2209 USB V1 to mount a fan because the RP2040 kept overheating. Use 4xM3 heatset inserts and M3x14 screws to mount a 3010 5V fan, the fan can be plugged into the unused USB expansion ports…
This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…
Battery retention arm model can be found here: https://www.printables.com/model/645510-hyper-go-16207-16208-16209-16210-battery-arm Designed to snuggly fit a 75 * 34 * 26.5mm or 2.95 * 1.34 * 1.04inch battery pack This is the battery…
I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.
In the original model the lower switch recess was slightly to shallow, the switch was standing out.
NEW GENUINE MERCEDES BENZ W169 W203 W204 W209 W212 - BALLPOINT PEN HOLDER Since my pencil holder cracked, I drew new one, which are a little stronger in some corners, but it is very similar to the original one. Work perfectly! Printed…
The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.
Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…
Multimaterial files are not multipart files, you can't assemble them after printing, they need to be printed with the multimaterial machine like mmu2, AMS, Palette etc…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…
