52 models
Powerbank 21000 mAh with 18650 Li-Ion batteries. Part list: powerbank modul SW6208 (power rating of 22.5W) 6 Samsung INR18650-35E (6x3500 mAh) 2 screws M2x10 (for housing) 2 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the…
This model is supposed to look pretty close to the original casioak resin case. If you need to replace it or just want to experiment with other materials and colors, this is for you. Just print it on its face. With good settings it is a…
A simple travel case for the Philips Sonicare 2100 electric toothbrush. Uses eight 10x3mm magnets.
You can model you own case around it. it should fit pretty good around the watch core. it's not perfect, but maybe in the future i can update it to make it even better. There is a model which tries to be as accurate as possible and one…
Compatible with Shimano Y8J712000 : BR-M9000 BR-M9020 BR-M987 BR-M985 BR-M8000 BR-M785 BR-M7000 BR-M675 BR-M666 BR-RS785 BR-R785 BR-S700 Compatible with Shimano Y8J712100: BR-M6100 BR-M6000 BR-M615 BR-S7000 Name Compatible Y8FZ05000…
2/12/25 Update - Check out my new Crosman 2100B moderator mount. Print as many baffles as you want; the more baffles, the greater the sound suppression. Make sure to print one endcap. The barrel adapter is designed to be secured with a…
I liked the Moderator/Muzzle break from Dan , but the threads would snap off anytime I would pump my Crosman 2100B air rifle, so instead of just relying on the threaded part to hold a moderator on, I added a shrouded portion to snugly…
2/12/25 Update - Check out my new Crosman 2100B moderator mount. I remixed the barrel adapter and added ½"-20 threads to allow the use of any threaded moderator you might have or want to print. The barrel adapter is designed to be secured…
Oktogonální design CasiOaků mi od začátku trochu vadil, takže proběhl redesign víc k mým oblíbeným field watch. V4 je lépe slícovaná s adaptérem na NATO řemínek.
je propose ce modèle de caisse de y 2100. j'espère pouvoir plus tard ajouter le châssis.
28/06/2024 Update: Added version 2. I have added parallels, and made the centre v slot larger. I also printed the new version using ABS and they're great!…
My duct had all of its pins/clamps/whatever missing and didn't want to pay 70 Euro for an aftermarket replacement, so I reproduced the design. I have no clue how the original part was clipping into the heat wall, so I made it the way you…
This is a replacement plate for the bottom of the router. Can also be a starting point for other mods like a track sled for the router. I recommend printing in PETG for rigidity.
Print these with at least 3 walls and 3 top and bottom layers. Print one bottom and 3 sections. There is an OD taper on the section which goes down, I suggest you use a brim to help keep it on the bed. After printing glue the sections…
I wanted to reuse my 10+ years old Lian-Li PC-v2100 Plus tower case, but could not find the proprietary screws used to slide 3.5 inch HDDs in the internal bays. So I designed these brackets instead. I printed a bunch in ArianePlast PETG;…
Nice toothbrush, but looks like the standard button only lasts a year or two before the rubber cover starts falling apart. This is a simple replacement in TPU. I used 0.15mm layers. It locks into the original groove, but if you want to…
Simple desk or tabletop soundbar stand for Hisense-HS2100 soundbar, this is designed with a slight tilt up . No supports are needed with this model and should take approximately 1.5 hours to print at 0.2 with 20% infill, depending on…
My Netwon MessagePad 2100 didn't come with a AA battery tray so it was always tethered when I used it. Original AA battery trays are hard to come by. Building upon the excellent work by Levi Stanley (niterain) of a AA battery tray for the…
Simple watch movement holder. Specifically it is designed for the Casio G-Shock GA2100 or other similar sized movement.
This is a Honeycomb Storage Wall Mount for a Netgate 2100. I remixed this model in Tinkercad from a design posted by nickandhiscat on Thingiverse ( https://www.thingiverse.com/thing:5452122 ). To make it possible to install the gateway…
. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…
The Kohler BD-N450US uses an install plate from part assembly K-1321002, but the plastic rectangular inserts can break. I made a custom insert for our toilet that takes up the whole space. I've included the STEP and F360 file so that the…
Requires: Four 3.5 mm x 30 mm screws A board or tablet of sufficient size (see below) Four pieces of 10 mm x 10 mm aluminium extrusion of equal length, roughly 10 cm are good. Your tablet needs at least a flat surface that is 370mm wide,…
Find some replacement parts and easily chip your 2-4-2 steam loco with the PCB replacement for a mXion Drive M decoder : Screw the replacement into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no…
Past bestimmt auch für andere Eizo Monitore. Etwas stramm dafür wackelt es aber auch nicht
One of my first prints on the Prusa mini+. A green translucent rocketlamp I designed and printed the base and top in petg with white standers in PLA. I used supports on the standers for the hooks to connect to the base. For the top make…
simple wallmount for tp-link archer vr2100v
a imprimer en TPU seal N° 18 n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Best printed with the bottom side down, using tree support just for the teeth.
pegs bag support for Leifheit 82100 / support simple pour bac de pinces à linge sur étendoir Leifheit 82100 Print Settings Printer: HK fabrikator Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: eSUN PLA Category: DIY
This is a adapter you can put on your old headset to mount some new earpads, since those who came on those headsets originally are falling apart by now. To install this adapter you first have to carefully pull off the old earpad along…
Print If You Are A Fan Of Warzone
I couldn't find a control box for my router table so I made it like this. I created everything in Prusa Slicer so it's in *.3mf format. The models look a bit strange without negative volumes (I don't know how to convert to *.stl yet and…
This divider has been made for the “steel city” brand, I have not tested other brands yet. Come back in the future when I add different variations. You have to print with support to use the raised quadrant so it can fit properly. The two…
In our beautiful house the construction company failed to finish all details including an open mailbox. So when windy we loose a lot heat through this hole. I decided to make a 2 stage seal by means of a hatch system. unfortunately the…
This replaces the power button on our Splendide 2100XC washing maching, but may work for other Splendide models as well. Print Settings Printer Brand: Creality Printer: LD-001 Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 25%…
A quickly done (but useful) wall mount you can stick to any flat wall and keep your hair dryer (Philips - ThermoProtect 2100W) up.
Adjustable foot for tumble dryer "Siemens Siwatherm TXL 2100" or other models, printed with PETG
simple router mount
NAVMAN 2100 fuel flow gauge cover (without buttons). If you print in clear it and paint the top face, the sides glow from the meter LED. I have printed this on FFF and Resin and both are great. It is slightly rounder than the original.…
Tarım, Mobilya, İç mekan tasarımı
Agriculture, Furniture, Interior design
Ölstab Verschluss für Güde Stromerzeuger vt 2100 r
What is this It is a clamp suited for my ATR2100x-USB (32mm diameter) microphone. The clamp fits on a microphone arm with what I think is a 3/8" thread. It is a very tight fit. Don't print this with materials that are prone to snapping. I…
Brackets for convenient mounting of the Noctua NH-L12S to FCBGA 2518 sockets. Created and tested for the Supermicro X11SDV-4C-TLN2F motherboard. You must print two - left & right are identical. You must use ABS or PC for print. DON'T USE…
When replacing the broken speaker on my Icom 2100H, the replacement speaker was slightly thicker than the original, such that the speaker and case didn't fit cleanly in place. I duplicated the original design precisely, then made a…
When replacing the broken speaker on my Icom 2100H, the replacement speaker was slightly thicker than the original, such that the speaker and case didn't fit cleanly in place. I duplicated the original design precisely, then made a…
a imprimer en TPU seal N° 18 n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
This divider has been made for the “steel city” brand, I have not tested other brands yet. Come back in the future when I add different variations. You have to print with support to use the raised quadrant so it can fit properly. The two…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/d7gOSNRZzj3 Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1GZYbiJiC7n Category: 3D Printing
