63 models
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
The ON/OFF/TARA button of a kitchenscale a friend of mine was broken (just the cover, the microswitch was ok). So I tried to design a new one in FreeCAD and print it. (Sorry for the terrible FreeCAD model, but for me it worked.) I printed…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The toggle switches on my Yamaha generator stick way out and are very subject to getting broken off. After replacing them for the 2nd time I made these covers that lock onto the generator with the lock nuts for the switches.
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Made to fit my 21700 4S2P Li-Ion battery , and utilise its dovetail to quickly mount it inside the fuselage. Flight time of that contraption is around 2 hours, and installation of battery takes a couple of seconds. Upper tray has…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Because Samsung killed EP-N5200 and there's only knock off remaining on the market, EP-P2400 is your only option. But Samsung decieded to make it flat and a alignment nightmare, so here's my fix for that. The pad's height is designed for…
After driving through fresh snow I found the car full of snow… there was a huge gap between chassis and body shell. This model closes these gaps. Printing PLA+, snug support, see 3mf file attached, Any other material may work, too.…
I had this second hand gas heater, the Truma E2400, but this part was missing and it appears to be smaller in diameter than the spare parts you can buy …. So I designed one (from pictures & measurement of the parts you screw it on) and…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Want to have spare parts without waiting for shipping ? This is the front shock absorber mounting plate for the wltoys 124008. I print it with carbon fiber nylon. Probably stronger than the original part if used with longer bolts. It…
FPV canopy for Volantex Ranger 2400 and Volantex Phoenix 2400. With 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. This is a rough first version,…
Replacement cap for the w639 front windshield wiper nut Print tested using TPU 95A .
I wanted a vertical phone stand with wireless charging for my Samsung Wireless Charger. I couldn't find any models I liked, so I created one myself as CAD exercise. I created it for: Samsung S23 Ultra with Otterbox Defender Case Samsung…
Now Refined! Fits 4 10*10*5mm Neodymium Magnets, needs some CA Glue tho. With the “Barcode Scanner Holder Insert” you can even integrate the Magnets into the Print, but beware they are really strong.
This is a basic model for Volantex Ranger 2400 and Volantex Phoenix 2400 canopies. It is my attempt to reproduce stock canopy form. This model is not suitable for printing as is - instead, use it to make your very own canopy! I keep this…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) I have a Ridgid R4514 Pro 10 in. Jobsite Table Saw, on which I broke the little springed sliding retaining fingers off the fence slide while removing…
I made a standard Garmin mount for my PR2400 bike lamp after the original Ravemen mount broke. I used this model from Thingiverse of a Garmin quarter turn as a base, and made some adjustments as it was a bit loose. Keep the three screws…
🛩 FREE sample of the Blanik L-13 2400 mm RC Glider — full kit available here This is a free sample of my full Blanik L-13 2.4 m scale RC glider. Print these parts to test your printer settings, surface finish, and LW-PLA workflow before…
support for wireless charging base and cell phone
These fenders were designed to be printed in ABS-like resin. Pre-supported files included. Find also threaded versions and a 3mf file with suggested print settings (from the prototypes, PETG) attached to be used on FDM printers. Assembly…
While FPV driving, I randomly run into things. So I thought designing a bumper might be a good idea… Printing Bumper & shocks saver: PETG. Use modifier object for more infill where needed to increase strength. Bumper front part: TPU for…
This is my attempt to recreate vertical stabilizer of Volantex Phoenix 2400 (Should fit Volantex Ranger 2400 too). You can print this if you want. Use filament piece for stab axis, glue some parts together with CA glue.
This FC plate replaces stock wooden plate and mounts Matek H743 Flight controller, its USB extender, optional buzzer, and two wing connectors like these . Lots of holes for cable routing using zipties. Been flying this for a year, works…
Everything needed to build the trailer is included except clear parts. Use any clear material of your choice to replicate the windows. A matching trailer hitch is still under construction. All dimensions are in mm and correspond to full…
After my son crashed his wltoys 124008 and broke the whole wing off, i decided to design one that i can print. No supports needed. I printed it in PETG
More part numbers and CAD formats on www.traceparts.com/goto?Product=30-13122017-111782
11/27/2025 -- I printed the Dewalt base but my handheld router did not fit on top of the jig... the base was too large! So I removed the one that was there and uploaded the new base that will fit the palm router and with the screw…
I am a big fan of Shadow of the Empire, game and book. I am continuing my trend of tinkering with existing models using CG-Trader Greebles and sources here. Still a work in progress to cut to print. Lot of detail crammed into this model…
Box for four AAA batteries. I tried other battery boxes but they tended to need a rubber band to hold them together in an overnight bag. This has a sliding lid that grips all round so should be secure. Just enough room for most types to…
Cooler assembly for Zendure 2400AC plugin Battery using 2 140mm computer fans. Powered by the cooler exit on the inverter using a selfmade connector. All printed on Ender3v2 in eSun PETG-HS Parts needed: 2 x Fan 140mm 12v 8 x M4x35mm bolt…
Summary: Using the original 36XX/5X0 motor mount the gear mesh seemed a little to tight, so I made this adjustable one. It is printed in two halfs to remove the need for supports. The halfs are screwed together with two M2x6mm FHCS. On…
This is my take on an organizer to fit the three Millennium Series Games of Chronicles of Crime into one box. This insert will fit: Chronicles of crime 1400 Chronicles of crime 1900 Chronicles of crime 2400 Chronicles of Time (KE) All in…
This is a custom motor mount designed specifically for Sunnysky x3120, although i guess it will also fit any other sunnysky motor. This is intended to be used with stock metal plate & screws so you dont need to drill anything. Note that…
This bumper protect your car of crashes. It's for wltoys 124007-124017. Needs supports. I recommend use screws lager than the originals also you can use the original srews.
It's spare part for Wltoys 124008. Part number: 2706
Was rebuilding a boat with my dad and didn't feel like ordering a Scupper flange for it. So I made it. It fit perfectly. I made it out of PETG. Good Luck hope this saves someone else time and money.
Deskstand for a Datalogic QBT2400. Category: Tool Holders & Boxes
Tired of trying to align your smartphone with Samsung's inductive charger? Print my design of phone holder bracket! It was design specific with EP-2400 charger in mind. Print in the position shown in the photo - you will need supports, my…
phoenix 2400 glider new motor mount For secure fixation, the joint area must be reinforced.
Large, full-height Harbor Freight bin especially for your YT-2400. This is probably my favorite bin so far, if that makes any sense. I've done my best to keep the amount of plastic used down, and the YT-2400 very nicely nestles into a bin…
The design is optimized for easy printing; support material is only needed in the mounting holes in the main body, the TPU part do not require support. The fans are mounted using standard mounting screws, such as those included with most…
Hey makers! Brief I'm sharing an 80x80 cooling fan adapter and cap for the VEVOR 2.2kW ER20 24000RPM 400Hz square spindle. I haven't had a chance to test it on the other square spindles from VEVOR, but very likely this adapter will work…
Printed standing up with supports. Testing PETG on a 2 week trip in August.
Center caps for the MiM 2400 wheels from 80s. No clue what the part number would be. Print in PETG or ASA and paint to your liking. The center is left empty for your own logo or text.
Replacement grid to print for the Truma Gaz Heater E2400. Diameter 80mm Height: 20mm
Someone wanted the clips so i made it. Category: R/C Vehicles
This is a repair part for a broken leg on a Pt 2400 rowing machine. Printed at .32 resolution using FF hyper speed profile on an Ender 3. No supports or rafts were used and the infill could be 10 to 25 %. I removed a lot of the plastic…
We needed a bracket for the printer head on our Logojet 2400, so I made a quick model to replace that piece. Material: PLA+ Print temp: 200/60 C Infill: 100% (adjust to your liking) Wall thickness: 1.2mm top/bottom thickness: 0.8mm Print…
I picked up these TP-Link Deco-W2400 AC1200 wireless mesh devices to extend my WiFi into the garage and realized that I needed a wall mount. There are several that can be downloaded, but none of them worked particularly well for me. The…
This was to solve the problem of my car not having a wireless charger built-in. It is designed specifically for the Samsung EP-P2400 "super fast wireless charger" - I would not expect it to work for other chargers without modification.…
The end cap that holds the main brush to the vacuum housing.
Replacement motor mount for Beta2400. Use PETG while printing. Category: R/C Vehicles
Centre console mount for Blink Marine PKP 2400 LI. Fills the space for the radio and uses OEM mounting points with a patruded mount to raise the CAN keypad to be flush with the centre console.
Filter component step with colors for use in PCB lib RSLF07 240052B 90.05-0.03M
Centre console mount for Blink Marine PKP 2400 LI. Fills the space for the radio and uses OEM mounting points with a patruded mount to raise the CAN keypad to be flush with the centre console.
I made a standard Garmin mount for my PR2400 bike lamp after the original Ravemen mount broke. I used this model from Thingiverse of a Garmin quarter turn as a base, and made some adjustments as it was a bit loose. Keep the three screws…
🛩 FREE sample of the Blanik L-13 2400 mm RC Glider — full kit available here This is a free sample of my full Blanik L-13 2.4 m scale RC glider. Print these parts to test your printer settings, surface finish, and LW-PLA workflow before…
🛩 Blanik L-13 — 2400 mm Scale RC Glider, fully 3D printable DOWNLAOD ZIP FOR ALL FILES A full-scale-look, test-flown 2.4 m wingspan Blanik L-13 you can print at home on any 200×200×200 mm printer. Designed for LW-PLA / LW-ASA airframes,…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
🛩 Blanik L-13 — 2400 mm Scale RC Glider, fully 3D printable DOWNLAOD ZIP FOR ALL FILES A full-scale-look, test-flown 2.4 m wingspan Blanik L-13 you can print at home on any 200×200×200 mm printer. Designed for LW-PLA / LW-ASA airframes,…
