Counting matching models…
Designed this tiny case with a snap-fit lid for a 2 -channel 5/240V Omron Low-Level Solid State Relay. It has been designed as a very fit, the SSR board and relay modules only just fitting inside. It is symmetrical with cutouts to access…
A simple wall outlet without grounding. In Holland we have 2 different wall outlets. One with grounding and one without. This one is without. The first one I shared was to tight, now the plug can be smoothly inserted. No need for support,…
Printed this out of PLA. No brim or supports needed.
If you want to leave the printer's power supply inside of the HomeCube use this cable grommet for the 240V power supply cable. For my power supply cable I need a 30mm borehole so that the plug fits through the hole. The outer ring of the…
I recently bought a "LED Power Supply" from eBay for my LiPo charger, and found the instructions and STL from bastian___ - but unfortunately that cover didn't fit my PSU, so i designed a new one. The PSU has the model number DY01, accepts…
Mounting box for 240V switches to make turning your printer and attached pieces on and off a simple process, I used 2 3m extension leads, one for each switch. One controls my 3D printer, the other controls the LED lighting, extra fans,…
I was tired of my car charger extension cord (the thick 220v/240v dryer cord type) lying on the ground so I designed this very simple wall bracket to hold it. approx. 6 inches x 2 inches
Kickass portable A/C adapter that allows the hot air outlet flexible hose to come out from the top of the unit. It helps save space behind it, allowing to place the unit in small areas, such as caravans, vans, and cars. Printed with PLA,…
Kickass portable A/C adapter that allows the hot air outlet flexible hose to come out from the top of the unit. It helps save space behind it, allowing to place the unit in small areas, such as caravans, vans, and cars. Printed with PLA,…
How to print Do NOT print these covers from ABS or PLA or other hard plastics that can break. If a prong breaks, it can get stuck in the outlet. You want something that can flex rather than break. I would think that TPU plastics with…
This is a simple, Wall Mountable, 240v Relay and Aussie spec Outlet Box for CNC Machines. I used a 2 wire Lever lock terminal screwed into the outside of the case with a self-tapping screw. The Fotek SSR-40DA relay can be mounted with M4…
This electrical box is designed for mounting standard 240V single or double sockets onto any flat surface, secured with four screws. It's reinforced for enhanced rigidity and safety. The mounting screws are spaced according to the…
