Counting matching models…
Please leave a like if you enjoyed the model or it helped you. :) Remixed from : https://www.thingiverse.com/thing:4715615 Started off by making it a bit easier to print by adding a slopes to some of the overhangs. Then ended up taking…
Needs an M2x3 or M2x4 screw for attaching the SSD to the computer. Pusa Slicer: Filament -> Cooling -> min print speed probably needs to be set to 3 or there might be defects on your printed part. Things will probably get pretty toasty in…
This model is compatible with the lego system.
Simple bracket that mounts to the standoff screw for the M.2 slot. I didn't like how most options out there have an offset between the bracket screw hole and the drive's mounting edge and/or were too thick for standard M.2 mounting screws.
This model is compatible with the lego system.
Hey, here's my 1/30 scale Zlin 242L, ready to print. [Edit v.1.1. Updated cowling to more accurate profile w/ stall rails, improved prop shape, thinned landing gear legs, and changed recommended print settings for rear fuselage.] Printer…
This model is compatible with the lego system.
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
English version below! Work in progress! Additional pictures will follow! Wie Besitzer des Acer S242HL vielleicht wissen, hat der Monitor keine Vesa-Befestigung. Deswegen habe ich aufbauend auf der originalen Befestigung einen…
A set of M.2 form factor SSDs with both M and B key combinations. Also, S1 (1.2mm component height), S2 (1.35 component height) and S3 (1.5 component height + M and B-key versions are available. All other dimensions (including keep out…
I used this model to install an M.2 2242 SSD in Banana Pi BPI-R3.
Overview This is a pretty small and slim extender to adapt a 2230 SSD to a 2242 slot. Specifically, for the 2242 SSD slot on the Lenovo ThinkPad E14 Gen5 (picture). For this the no-lip version is recommended. Note: For anyone coming…
Hi, wltoys 12428/12429 owners, I believe you do know that steering is not perfect in those models, and here is the ultimate solution to resolve all the issues ;) Enjoy, share your prints, suggest improvements, and be safe! What you need…
Whoops, I bought a 42mm length SATA Expansion Card but my motherboard only has screws at the 60mm and 80mm mark. This part holds my card in place with attachments at both the 60mm and 80mm points.
Slim protective case for the LD2420 24Ghz mmWave Radar Human Presence Sensor like the Hi-Link HLK-LD2420 from AliExpress Similar to my other display screen and ESP32 cases, this provide a minimal case with easy access to the pins for…
Holder for Knipex 1242195 wire stripper. Requires skadisnut to mount. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards Happy printing! 05.09.2022: Added files with 2.2mm…
Additional Material 5x M5 Nuts (self securing) 4x M4 Screws 12mm (Monitor Side) 4x M5 Screws 12mm (Vesa Side) 1x DIN 912 M5 30mm (Connecting the two Parts) Washers optional Design inspired by https://www.thingiverse.com/thing:4161847 The…
A shim to "soft" lock the rear differential without damaging original parts. Print two of them. Category: R/C Vehicles
I needed a slim adapter for a 2242 to 2280 M.2 SSD. I also added a STEP file for easy modification
I had an Intel Nuc NUC6I7KYK and noticed that it wouldn't accept a smaller m.2 SSD so I designed this little bracket which doesn't take long to print. Enjoy!
Practico colgador para rollos de cocina, admite los rollos mas grandes, es para colgar debajo de estanterias y asi aprovechar el espacio. lleva un eje realizado tambien de plastico añadido tapas opcionales con el eje desplazado , para…
do you need this ring? no, not necessarily but I like to place this ring on over the 4 tubes to make them 1 solid piece Category: Sport & Outdoors
Steps Disassemble like this: Remove the switch and separate the transparent light cap Remove the blue front light cap with some alcohol Print the new switch Orientation as shown in the picture Layer 0.15mm Support YES Top/Buttom Layers 5…
After my Acer display came down i threw together this design with stronger take-ups. Printed with 4 wall lines and double infill lines. There is room for improvement, i'm sure. I'ld like to reduce the amount of filament to be used in a…
This model is compatible with the lego system.
Like usual, I used 1.8mm brass rod for the axles, but you can use filament. Tires are best printed in TPU. If there's any problems, let me know! I wanna make this as easy to understand/build as possible. Posting makes is greatly…
Quick connect / lock mechanisms are a blessing, if you travel a lot with your gaming setup (LAN parties). This adapter plate allows to quickly swap between the original foot and a VESA mount so you don't need to unscrew the monitor every…
Stackable Tray for m.2 SSDs. Remix of my DIMM/SODIMM Tray
I've tried the project with mounting on the diff, but I didn't like how low the wheels become, also it didnt work nice with my shocks from 14001, so I decided to mount it on top of the body, also put on top of it the rear light. More…
Warning : it is very small and difficult to print correctly, monitor the printer to avoid any problems
Spare arm for shovel actuation, clicks in place, and there can be added a zip tie for extra hold.
---- new model without battery ----- In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new…
I made the back of my 12428 shorter and designed another battery cover / spare wheel roof holder To be attached with small zipties, refer to the photo. When closed in clicks in between existing beams Category: R/C Vehicles
I guess you know that the Wltoys 12428 steering mechanism has lots of 'not good' traits, like getting stuck in sand or mud, wobbling, and having a low turning angle. Most of my RC cars have bell crank steering, so I decided to upgrade…
i make some esp32 cyd ESP32-2424S012 diameter to custom case but i think other need it too
should be correct within a few 0.1 mm
Simple case for the sensor LD2420. onshape link: https://cad.onshape.com/documents/7fe9b2202ecb885bffb6e2a3/w/aa93626d576c4e4043e3f4c7/e/48be5b06ba6e0a77ca0ae2fc?renderMode=0&uiState=66ef622f6caf30072eaf8ffb
I have a lot of Ultralux LLVP1242 downlights at home. Every month I have to replace at least one or two of them, and it's gotten quite expensive (at 12-15 euro each), so I decided to convert them to regular GU10 LED bulbs. This model…
Electrolux 2425096 Glass Fridge Shelf Rear Trim (Spare part) Length (mm): 518mm (517mm) Hole for glass legrh: 495mm Electrolux 2425096019 EAN 7321429844253 For the split model use 3mm screws
A Skadis holder for a WORX WX242 Electric Screwdriver and a place for 10 bits
Printed it with petG first and it survives at least 5 runs but had one serial crash so… so I've made it with TPU and it's kinda unbreakable now! More details here - https://bit.ly/LeoRc how it is installed: how the car can jump enjoy and…
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…
This model is compatible with the lego system.
Hello. This is for a Tissue Box.
DDD Wall Control tool holders for PB Swiss SwissGrip drivers. Rainbow Slotted Screwdriver Set PB 8240.RB Slotted Screwdriver Set PB 8240 Rainbow Phillips Screwdriver Set PB 8242.RB Phillips Screwdriver Set PB 8242 Torx Screwdriver Set PB…
General This is a replacement for the clutch slave cylinder flange gasket used on manual gearboxes of the Mercedes-Benz W124. The Mercedes-Benz part number is A1242950087/1242950087. You can also find a .dxf file you could potentially use…
This model is compatible with the lego system.
Aurora Unit 242 is one of the helper characters from Metroid Prime 3, I used it for the "organic component" inside the BOX Security Robot (link here https://www.prusaprinters.org/prints/86401-box-security-robot-metroid-fusion ). The brain…
I bought a WORX WX242L (not affiliate link) during the Black Friday sales, and I’ve really loved it ever since. You know what makes me love it even more? A perfect Gridfinity bin that holds the screwdriver and all its bits neatly. I…
Tisk MK4S, materiál PLA, doporučuji dát na bok a zapnout podpěru s úhlem 90
Wltoys 12428 steering part left/right. Use full infill. Use the material PETG for beter strength. You must use supports in some sections.
I have at home hair cutter Phillips C-242. Original adapter allow set hairs lenght between 0,5 - 2 cm. I made extended adater for maximal cutted hairs lenght about 3,7 cm. Print instructions Category: Bathroom Print Settings Printer:…
As it is described in a title ;) In short - this is the ONLY WAY to solve ALL wltoys12428 steering issues! buy cheap parts from ali - https://s.click.aliexpress.com/e/_DCCUMIV print base and top plate from this topic print servo holder -…
The Jayco 242BHS / 242BHSW doesn't have an AC vent in the lower bunk. It does have an AC vent in the ceiling of the bathroom, but the bathroom is so small that it ends up damn near antarctic in there. So I made a plenum. You pop off the…
Multiboard holder for Worx wx242.
Repair kit for: JCB 4CX Bruder 2428
This is a clam shell case for 2242 SSD's created in the same style as SD Card clamshells. Required Materials : 8g of filament Assembly : Be careful removing supports from latch. Carefully fold at soft hinge. Version Notes : 1.0 - Original
s=7.05mm， 7pcs 6mm*2.6(or less)mm magnet, the diameter of holes for the magnet is 6.05mm. Use bench vise to press the magnet into the holes 2pcs M3*6 screw, 2pcs M3 hex nut
This is a replacement drawer latch for older Lista cabinets. The original part number is X2421 and Lista does not produce it anymore. It's probably smart to use PET-G for this part, I think PLA would be too brittle. There are some small…
Replacement for WLtoys 12428, female part of the rear drive shaft . I 3d printed this with a 0.6mm nozzle with PA-CF filament.
Replacement wheel that fits a New Bright Bronco 242RRXS2. Would recommend printing axle-down with bed supports for a better finish. PLA+ at .2mm layer height, 100% infill. Turn up the perimeters for best results. As always, .f3d file…
A Clamp to mount a Steinberg UR242 Audio Interface below your desk. Can easily be customized to fit other Audio Interfaces / machines. Print Settings Printer: P3DA Rafts: No Supports: No Resolution: 0.4 Infill: 25% Filament: Reflow rPETG…
I am looking for the more durable wltoys parts ;) More details here - More information here - https://bit.ly/LeoRc And this is how it was broken last time
This is a model of mine, specifically for steam turbines, based on the root. Because of the airfoil's profile, I had to make 3 versions prior. It is an improvement, I hope. Enjoy!
Lego 2420 77844 15397 2639 64799
The stock shocks are pretty bad, I had some extra 110mm shocks from a different project. So I made these spacers to mount the shock to the rear axle. they are designed to print well without supports, the bridging for the holes is set up…
The original is too fragile, print it in TPU so it cannot break anymore ;) More details here - https://bit.ly/LeoRc This is how I've tested it, so it seems durable and worth sharing. Enjoy! don't forget to try the improved Steering design…
2242 to 2280 dualsided nand ssd
Once I've moved to the vertical shocks mount I've found that it's needed more space for the shocks mounting. Also if you print it in TPU it will give you more protection. Here is the few videos where I've tested it, so it seems durable…
The original WLToys 12428 came with a small LiOn battery pack. But I want to drive longer and don't want to hazzle around with LiPo's in my household. So I choose a 5.000 mAh NiMH battery block. So here are the steps: print this NiMH…
Instructions 1- Uses the screws (4mm wood screw might work as well) that came with Modem, tighten the screws to the holes on the model and leave some space to allow installing and removing the modem. 2- then use a QUALITY double-sided…
I own this model : Bohrständer Fräsständer BF1242 (Drilling milling stand) and the original drill holder (aluminium molded) does not fit any of my (cheap) drilling machines. An engineering response is to draw and print a replacement to go…
This is heavy additional rubber armor plating for the expensive handheld OWON oszilloscopes. Will safe your device if accidentally dropped (does not protect the probe connectors). This element does not interfer with any of the OWONs…
Models for sealing the Wltoys 12428 shock absorbers to prevent shock oil leakage. Only gasket and bladder are needed for the mod. Piston head is just a bonus part. Gasket and bladder should be printed with flex (TPU, TPE, etc.) filament.…
Spool spacer for many Lincoln wire feed welders. Category: Machine Tools
Supports needed. Category: Vehicles
This is a mounting block for the Deta 6242 4 Outlet(GPO) with USB available at your local Bunnings but the mounting block is a special order. So I based this design off the 5 outlet mounting block. As Always I have included the design…
Got the saw used with broken cranks. Didn't want to spend $50 for new ones. These fit a D shaped ½" shaft, so it could fit other saws as well. The process for fixing. I used an one inch Forstner bit to bore out the center. First I needed…
The replacement outer sliding part for rear drive shaft. In this case, genuine part did snapped clean with broken M2 screw it the hub. Flexible part no is a mechanical circuit breaker - it will skipp or detach in case of real axle…
A printable 3d model for SSD M2 Rack
In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new device to add in your Home Assistant…
Rear lights specifically designed for the WLtoys 12428 RC car. This model features a robust and easy-to-install structure, designed to house standard LEDs and improve the vehicle's visibility and realism during use. The design includes…
Update 2026-07-12: A v2 file has been added, which features some reinforcements to make the overall flex less, and to improve the PSU holder. A modified version of the VP2440 10" Rackmount by Andrew Plaza (…
IMPORTANT YOU NEED THE WASHER TO PREVENT DAMAGE TO YOUR LAPTOP! I made this so I could put a B+M key M.2 NVMe SSD in the WAN slot on my Lenovo Thinkpad T14 Gen1 Ryzen laptop. If compatible the slot is wired for PCIe x2. If the WAN slot is…
Started using my akg headphones again, but this part broke years ago, degrading the “fit”. Could not find this part here or any other site, so uploading part i modeled. Maybe someone else will find it useful. I see no reason why it should…
A headphone holder for the P2423DE Monitor by Dell. I am not 100%, but they might also fit on other stands of the Dell P-Series Monitors. The Monitors are used in my school, so I printed those holders in bulk. They work perfectly well and…
Button for Krups GVX242 coffee grinder. Take it apart and replace the button with this and it'll work as before.
Update: I have changed the files for the head, frame, and bottom covers. The head now has an insert for the eye so it won't have the ugly seam. I changed the frame and bottom covers to add a print in place battery door. The new files have…
I printed it with PETG, which is more ductile than PLA and more suitable for this kind of clamp-fit parts. Try PLA all you want, but be careful of it breaking, dont hurt yourself!
This is an insert for the Elektro-Plast Elegant IP40 teleinformatics box model multimedia surface-mounted distribution board 2425-20 It allows for the placement of fiber optic loops, pigtail splices with welded connectors, and hiding them…
This mold is designed for vacuum forming the hood/mask of the WLToys 12428 model or its clones. Perfect for RC enthusiasts who want to create their own lightweight and durable plastic hoods using vacuum forming.
Printed from TPU
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Make this bumper plug, for Iveco Bumper plug 5802242097
Replacement for the stupidly designed clips used to hold the parcel shelf onto the strings in the boot on the Mk8 Fiesta Ford Part Number 2423830
Náhradní nožky pro M1T242 / Replacement M1T 242 feet Doporučuji TPU / TPU recommended Tiskové parametry / Print paramers: Výplň / Infill: 30%
