Counting matching models…
This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…
Descripción: Este soporte ha sido diseñado para montar un ESP32-C3 Mini junto con un sensor LD2450 de manera compacta y eficiente. El diseño incluye una base redonda ajustable con sistema giratorio que permite orientar el sensor con…
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
作者QQ/微信：928737095 欢迎加入QQ交流群：107327759 官方店成品： 星仪245烙铁盒2.0-淘宝网 星仪245便携烙铁盒，支持放置烙铁本体，两个烙铁芯，一卷焊锡，清洗棉。支持烙铁架功能。 烙铁支架的金属圈采用内径12，外径20，厚度8的固定圈（不在此做店铺推荐，选择淘宝9毛左右包邮的购买即可） 使用M5 * 8 头颈7mm的螺丝固定金属圈： 304不锈钢十字小沉头螺丝钉-天猫…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
Gridfinity bin model that is capable of holding 2032 and 2450 batteries. Combined with Multiboard Gridfinity Adapters it is multiboard compatible as well. I use them to store rechargeable coin cell batteries that I bought from amazon. If…
Replacement watch band loop for the Garmin Forerunner 245. Tested and feels most comfortable printed in TPU. Print with supports. Print with supports.
G-code is available with related modifications. A 0.4mm noozle printed on an Ender 3 is used.
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
Configuracion de bgcode con cambios de temperatura para prusa mini ya que estuve buscando para mi y no encontre
Adjustable Case for ESP32 WROOM (38 pins) + LD2450 This case is designed to provide a functional and aesthetic solution for projects using an ESP32 WROOM (38 pins) and an LD2450 sensor. Key Features: Ventilated design: Hexagonal grille…
This model is compatible with the lego system.
Holder for a single CR2450 coin cell battery. Battery is securely held in place Designed for use with breadboard jumper wires or bare wire Total thickness is 9.1mm Support free print Also check out my CR2032 holder .
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2450 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
This holder is made to take up to THREE… spray cans aerosol sprays fingertip dispensers disposable 0,5l cans like Coke, energy drinks etc. drink/coffee cups other round stuff with up to 70mm diameter The size L holders have a width of…
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Remix of MilStrata Manufacturing's CR2032 battery holder to hold CR2450 batteries. Thanks to RetroGameRevival for the Fusion360 wrangling.
This is a 1x3 Gridfinity bin that holds 15x CR2450 coin cell batteries. If you'd like it in a different size, let me know!
Battery case for 10 CR2450 coin cell batteries. Premade Remix from customizable Print in Place.
Gridfinity model for 10x CR2450 coin cells
model je jako držak na strop pro přístupovy bod (WiFi Access Point) montaž samotného držaku pomocí samořeznych šroubu pozor držák jde namontovat pouze jednou stranou!!!
The case is designed to house ESP32 C3 Super mini modules with OR without pins soldered to it. The lid has two variations: Plain and with radar symbol. Features Space for the ESP32 C3 super mini and HLK-LD2450 modules, bluetooth antenna…
This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…
Small case for the ESP32 and LD2450 with mounts for 2 * 6x3 magnets. Prints without supports. I use this to hang it below my monitor and integrate presence detection in Home Assistant. Designed in OnShape, link here .
Remixed Case for ten 2450 Lithium Coin Batteries
3D Printable case for the CNC Kitchen C245 Heat Set Insert Soldering Iron Tips compatible with, for example, JBC Tools stands (ADS, CTS) and soldering stations such as the YIHUA 982, Quicko T245, KSGER T245 or Sequre T245. Fits the Insert…
The borders on the cutout part might be a bit thin. I did my best, so consider this a proof of concept . Modifications made using Tinkercad.
NEW GENUINE MERCEDES BENZ W169 W203 W204 W209 W212 - BALLPOINT PEN HOLDER Since my pencil holder cracked, I drew new one, which are a little stronger in some corners, but it is very similar to the original one. Work perfectly! Printed…
Case for ESP32 C3 Super Mini and LD2450 with USB C Connector. Backplate snaps in place. added an inlay for the case as the red led shines through white filament 2025/07/04: added ceiling mount, requires 1x m3s threaded bushing
I was tired of buying the expensive CR2450 batteries for my smart home devices. Now you can use AA/AAA batteries instead! Don't mind the cables – I stripped them to the wrong length and just went with it. 😅
This is a remix of the presence sensor originally designed by @FSquare_1622667. I made a few tweaks to suit my needs: Replaced the original screws and inserts with plastic screws (I didn’t have the metal ones at home). Thinned the walls…
Remixed version of Suicune. I didn't have AMS, so I split the parts into 3 and printed them separately.
Printed in PETG. 0.1mm layer height. No supports needed. This a CR2450 battery holder. It was originally designed for use inside a Zojirushi rice cooker. There is a battery hard soldered inside the rice cooker that powers the internal…
A few geometrical corrections: the tabs are now separated by 120deg when the screws slots are horizontal the antena will be perfectly vertical. It's easier to drill this way Slight tolerances corrections
Update 28.07.2024: Made two new versions according to my new parametric sliding box design, one for two CR2032 batteries, and one for https://www.printables.com/de/@plaid_brad_1260466, who is in need for a case for 2xCR2032 and 2xCR2450.…
Stützen auf dem Druckbett aktivieren!
Made a Batteryholder for CR24XX & CR20XX. Maximum is CR2450 and CR2032. You can modify the .3mf for your needs. You can make a color change on the writing on top. is a very easy print. Printed mine in PLA with no special settings.
I needed a CR2450 battery, I only had a CR2032. This adapter lets you use the smaller batter in the larger clip. This only works with clips that take the positive voltage from the side of the battery, it wont work if it take it from the…
Holds 4 CR2450 Batteries for Gridfinity. Printed with lightening infill Fusion 360 file for tweaking
Yet another coin cell battery case, this time for CR2450 batteries. Store up to 8 or 10 coin cell batteries in this small container, choose the version you want. As usual, the original native files are provided (SolidWorks 2020) for you…
Designed for 0.4mm nozzle @ 0.2mm layer height, recommended 25% infill, no supports. Holds 10 C245 style tips. In my design I wanted to add some weight near the base to make the holder more stable so using CURA's 'Pause at Height'…
A shape that can be used for temperature testing of PET material. Don't forget to set the macro before the layer.
Store up to six (cold) JBC C245 soldering tips, attached to the left to your soldering station. Specifically fits the profile of the C245 tips. This holder attaches to the soldering station just fine with a single M4 flathead bolt, length…
This is a solder-free AirTag CR2477 adapter. The CR2477 battery has about four times the capacity of the standard CR2032 used in AirTags, giving you roughly 4 years of battery life. Anyway, it turns out that at the right angle, you can…
This model is compatible with the lego system.
Coin cell battery holders made to fit in C and D battery dimensions. Designed to add cell batteries to unused C/D slots in a battery organizer. Currently supports: CR1632 CR2032 CR2450 LR44 These are the batteries I use so that's what I…
Its a battery Holder for CR2450 coin cell batteries Holds 30 Batteries without touching and included cutouts for magnets, Enjoy
This model is compatible with the lego system.
Based on the one created by Venom I have made this modification for more tips and modified the station attachment point
Read my article about this project: https://www.strangeplanet.fr/devlog/posts/2025/03/mmwave-presence-sensor/ The case is mounted on a orientable ball. To assemble the ball to the case body you will need a 20mm M3 screw and a threaded…
This is a remix of the original battery storage crate design inspired by Marzochi’s beer crate style and the great stacking features from TontoTraveller. In the original set, each battery type had its own separate full-size crate. For…
Adapter to replace button cells batteries with AA or something similar. I used wire wrapped around the outside and some scrap nickel strip through the middle. I soldiered on a AA battery holder and now my wireless sensors have tons of…
To be use with https://www.printables.com/model/535225-gridfinity-battery-holders
Multi battery organizer - 4xCR1616, 10xCR2025, 10xCR2032, 4xCR2450, 4xLR41, 12xLR44, 6xLR54, 6xAA, 5xAAA, 2xSD, 2xminiSD
Remix of the CR2450 model by loidolt with the following changes: Extruded the battery dividers so they didn't fall out when the print was stored upright Removed the grip at the top, since it was preventing the lid from closing on my…
Gridfinity CR2450 holder with batteries slightly offset to make picking one up easier.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Pre-colored .3mf file included. Best to be printed in wall…
This is what happens when a Swedish tank (a Volvo 245) meets a Japanese tank (a Toyota Hilux): weird machines. This 245 has modified height, new roof rack, new off road bumper, spare wheel, and new rally-inspired fog lights. Recommended…
Case to make a presence sensor with an ESP32 NodeMCU32s and an LD2450 mmWave sensor, the lid also has holes to glue 9x3mm neodymium magnets. The ESP32 and LD2450 should not require any glue and should stay in place once the lid is screwed…
Really needed to organise my CR** batteries, so took the chance to re-model the “modular battery holder” .stl into a parametric FreeCAD model, and produced the CR2450 and CR2032 holder.
Designed this alternative wall mount for the LD2450, as I wanted to mount the sensor flush against the wall using tape. Remixed this remote wall mount for this use case (the design is a bit rough, so I attached the Fusion360 file if…
Modified the battery adapter from @Simon_220817 to have better contact of plus pole. Moved the battery 1mm to the front.
Modelos compatibles con sets legos
Description The Mijia LYWSD03MMC temperature / humidity sensor is tiny and works great. The battery life is fine, but what if it was even better? This is a modification to the battery tray to accept a CR2450 battery, which increases the…
I overtightened the original one and it broke. This is for a Sundvik baby bed but fits others that use the sam part as well
Wanted a small case with presence and illuminance sensors with the use of Wemos D1 mini ESP8266. Inspired by : MMwave Multi Sensor fixtSE LD2450 by F-Square | Download free STL model | Printables.com Using the joint , nut and foot form…
A super long bridging test
Button cell CR2450 battery holder for Gridfinity refined. Sadly since CR2450 cells are too high, you can't stack another bin on top. See https://www.printables.com/de/model/786463-gridfinity-refined-coin-cell-battery-holders for the remix…
Battery Adapter from CR2032 to 2450
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
Housing made for ESP32. There no mounting holes for the esp32 because the esp32c3 versions from Seeed doesn't have mounting holes zo i fix them in place with a little hot glue. My first remixing a model without any experience.
CR2450 see remix for other batteries
A coin storage solution remixed to be compatible with the excellent gridfinity with pin system which requires no magnets: https://makerworld.com/en/models/440624#profileId-346300
Heavily inspired by Yoram van de Velde's Case and mount for LD2450 and ESP32 C3 Super Mini I remade everything in Solidworks. Features: Houses ESP32-C3 Super Mini/Pro Mini & LD2410C/LD2450 mmWave Sensor Designed to be wall mounted or…
In our new house, there was a missing water drainage grid. So I modeled one
Had a lot of CR2450 batteries from my ePaper tags that needed a temporary home This is a parametric OpenSCAD model - chose your size! update 2024-12: I renamed the model: it's of course for type 2450 coin cells (not 2405). Duh!
Redesigned profile, no need for support while printing in flat position
Fake CR2450 battery for ePaper. Combo with https://www.printables.com/cs/model/363969-epaperstand18650
A 1×3 Gridfinity bin (6u tall) designed to hold the CNCKitchen Heat-Set Insert Kit (C245 standard) . Includes dedicated slots for the full kit plus the 3/8″ tip . I realised after printing that it doesn't make sense to include the thread…
Based on bambula's model, I just made some minor changes to permit the use of 1mm core cable & improved cable routing. This adapter allows you to use wires and a combination of AA, AAA or another 3V power source instead of the CR2450…
This plate can hold more than one hook. Every hook can be placed exactly as you need it. For individual use. Perfect to hold combination wrenches smaller pliers / wire cutters other stuff with a hole to put on a hook 😊 This mounting plate…
Inspired by the one created by Venom, redesigned for 10 tips, also locking grooves on the station attachment piece.
A replacement part for Makita case
1x1 Gridfinity element that allows storing CR2450 button cell batteries.
I've had my JBC iron for about 4 years now, and it lacks the fancy built-in storage for C245 cartridges like the new models do. This is my V2 of the 3D print I have been using to store extra cartridges for about 2 years now. This version…
Only a small extension for another model ( https://www.printables.com/de/model/576749-cr2450-coin-cell-battery-gridfinity ) to have a lid on top. Please note, the lid is not 7mm unit conform. Printed with eSun PLA+ (black) in standard…
A simple JBC C245 tipholder for Ikea Skadis, to hold 10 soldertips. Printable without supports, I'm using 20% infill. Print three Ultimount Connector/Hooks from https://www.printables.com/model/376207-skadis-ultimount-connectorhook
After using the Ooono for a couple of years, I've gone through a couple of CR2450 cells, which are not available everywhere and cost too much for how long they hold up. I can get semi-used AA batteries at work and switched everything else…
Modelos compatibles con set legos
This is a compact holder for C245 soldering iron tips which protects the soldering tip and its electrical connections from damage. Ideal for portable use in a small tool bag where there is not a lot of space (You can fit two of the 3 tip…
PE112245 3.7v 1000mah 22x36x12mm LITHIUM CELL ------------------------------------------------------------------- Rechargeable lithium cell common in vape devices such as Breeze Pro.
Insert for " Rugged Box with Modular Slots " for holding CR2450 batteries. Holds 12 batteries. Making this two slots wide instead of one allowed the density to be from 4 batteries to 12.
Layer: 0,2mm, infill: 30%
This is the IKEA Skådis holder for CR2450 button cell batteries. I designed the holder to be compatible with different battery sizes and allow the holders to be perfectly placed next to each other on the Skådis board. The different sizes…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl I designed this special light trap for someone in my community, but I didn't…
I couldn't find tip holders that actually gripped the tips themselves; the ones I found were either too loose or not what I wanted, so I made my own. I printed it in HS-PETG from Sunlu, but it should work fine in PLA and other materials.…
