Counting matching models…
No screws required, just slide it all together. Originally designed to be used as a RFLink case.
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for one variant
Gehäuse für Arduino Mega 2560 mit Deckel und Rückstellknopf
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Building RH3Ds Ender 3 NG based on an Geeetech A10 I needed an adapter for the electronics box to mount the GT2560 v3 on DIN rails. This is a quick an dirty model directly created in PrusaSlicer but fulfills the purpose.
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3D model of an Arduino clone of the Mega 2560 microcontroller board. I needed one for an enclosure design, but couldn't find one that had precise dimensions for the mounting holes. Despite no officially-diagnosed OCD, my brain…
Es un estuche para tu Arduino MEGA
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
This thing contains a mounting plate and a drilling guide for the “Arduino Mega / Mega 2560 / Due Drilling And Mounting Plates”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate…
Printed in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and…
Arduino Mega 2560 Case A remix from: @firewolf8385 https://www.printables.com/model/602616-orp-arduino-mega-2560-holder His design fit my Arduino Mega 2560 perfectly... So obviously I had to modify it a bit ;) Removed a few pillars I…
a simple “slipper” for the Arduino MEGA 2560 R3 to prevent short circuits in a "flying" test setup Simply fits under the Arduino Also includes the CAD - Files
A holder/mount for an Arduino Mega 2560 for ORP compatible plates. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a…
This model is compatible with the lego system.
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards. Case should lightly snap together, bottom…
I recently bought a Elegoo electronics kit and designed this for the board and breadboard.
A very compact and strong mount for the Arduino Mega 2560. It uses 3 M3*approx. 13mm screws to secure the Arduino in place. The bracket has holes for three heat inserts to secure the Arduino and two on the other side to secure the whole…
A simple model of an Arduino Mega 2560 board
I have attached two covers, the first has no holes, while the second has holes, so you can connect the modules you want. UPDATE: I have added a model with holes to be able to screw your Arduino 2560 Mega anywhere. I recommend that you use…
This is my custom enclosure for the OpenAstroTracker open-source motorized sky tracker for DSLR cameras. Details for this project can be found here: https://wiki.openastrotech.com/ I was looking for a compact enclosure for the minimalist…
It is simply a holder for Arduino Mega 2560 that i have designed for my Printer electronics. Category: 3D Printer Parts
While this is completely my own design and model, I completely copied and was inspired by qfqfq's Arduino Mega 2560 Pro case ( https://www.thingiverse.com/thing:4253336 ). Mine is made to slot nicely onto a standard breadboard using the…
Caja peronalizada para Arduino Mega 2560 con ethernet shield, cierre sin tornillos.
I just lopped off the left end of Oscar's Arduino slot and the Mega fits right in.
This case is for Arduino MEGA 2560. Need x3 M3 Bolts.Contact me if you need any info about this print.
This project is a detailed 3D model of the Arduino Mega 2560 R3 designed specifically as a desk prop and decorative accessory. It captures the iconic layout and components of the board to create a clean, recognizable tech aesthetic that…
SOPORTE PLACA MEGA2560 LLEVA INGERTOS M3/OD4.2/L7
Ich habe das von lukie80 entwickelte Gehäuse weiterentwickelt und Platz für 2 Mosfets von 3D Freunde geschaffen. Außerdem hab ich es etwas vergrößert und auf beiden Seiten vom Board Platz zur Kabelverlegung ermöglicht. Außerdem habe ich…
Moin! Der Sockel für das Arduino Mega 2560 hat 4mm Löcher, 6 tief, für M3 Gewindeeinsätze. Passend dazu habe ich noch ein Prototypenboard entworfen, in das noch die beiden Steckleisten von meinem Arduino Koffer passen. Der Arduino-Sockel…
Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…
ATMEGA 2560 Stand w LCD and Breadboard with threadedd inserts for 3D printing M3 x5.7
Mega2560 ProMini case M2x6 screws Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20% Category: Electronics
A very compact and strong mount for the Arduino Mega Pro. It uses 2 pegs and some hot glue to secure it in place. The bracket has holes for two M3 heat inserts to secure the whole mount to whatever you want. M3 Heat Inserts, OD 5mm,…
Last Updated 09Sep19 - Added a "standalone" version for the bottom-half wish doesn't require a Sunfounder Acrylic case. The file is called "Mega 2560 Standalone Case - bottom.stl" Need M3x5 screws to mount the Mega 2560 to the…
MCU Fan cover for the Geeetech A10 Pro, with the GT2560 ver 4.0 MCU. Remix of the model by Despacho3d. Helps prevent print material from falling through the fan grate, possibly causing overheating and failure of the MCU. Also helps to…
Made for this model: https://s.click.aliexpress.com/e/_c43T3aS7 This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
Made two versions of a control box for my P3Steel. Both are made for Geeetech GT2560 Rev a+ (possible fit others as well?) Rev 2 is made for Raspberr Pi Zero, also with space for an DC-DC converter. Attached is also a cover with cutouts…
Battery compartment for the Arduino Mega2560 / DUE board Category: DIY
MKS BASE v1.4 BOX (MEGA2560) CS: Tento model byl vytvořen za účelem updatu staré boxu pro desku, který byl vyroben z akrylového plastu a byl během používání poškozen a poškrábán. Navrhnul jsem ho na hliníkový profil 20x20mm s drážkou 6mm…
Move your projects easily from one location to the next and building as well.
Telescope OnStep goto controller Box for Arduino MEGA 2560 with Prototype PCB for Arduino MEGA 2560 R3 Shield Board or CNC 3.0 shield . More info about OnStep goto controller on Howard Dutton project For my version on prototype board -…
This is my design for GT2560 and MOSFET housing. You can choose between an 80mm fan and a mall for the lid. M4 8mm x 4 is required to attach the lid. The board sizes of GT2560 and MOSFET vary, GT2560 board size I have = 93mm x 72mm MOSFET…
ARDUINO 2560 HOLDER for DIN
Simple plate mount for the GT2560 control board onto 2020 extrusion Made to suit my Tech2c Hypercube build but may suit others Update: Rev2 of base plate has shorter tabs to allow for the cover (if you already printed V3 (R1) then just…
Bracket was printed for replacement of the "original" GT2560 board fan, provided with the printer. Original fan was loud and annoying during print, so I decided to replace it with bigger and much quieter fan. I've used standard 80mm…
This is a mount I made for the Arduino Mega 2560. Ramps board is on top in the picture but the mount attaches to the arduino via swedging plastic posts with a soldering iron. Shown on my Prusa i2. This replaced the melzi v1.0 and previous…
Print with TPU and use double sided adhesive tape to mount the feet.
I needed a case for the GT2560 mainboard and remixed the Prusa Case. You can modify the file if you want in OpenSCAD. It is a work in progress!
Diese passgenaue Wandhalterung ermöglicht es, die Konsole der Wetterstationen Ecowitt HP2560 oder Froggit HP2000 sicher und platzsparend an der Wand zu montieren. Da das Originalgerät primär für das Aufstellen konzipiert ist, schließt…
I wanted to install the Arduino board on the printer, but I couldn't find a suitable place, that's why I designed this piece. I hope your problem will be solved. First, install on the profile, then install the Arduino board Important note…
This is a minimal ORP holder for an Arduino Mega 2560. It is based on Nikodem Bartnik's amazing ORP system. Usable on any ORP plate, this minimal design features 3 parts for versatile mounting options and/or faster printing . Secure the…
This is a Mega 2560 board with two Mosfet mounts for a metal frame printer (20x20 or 20x40) (No fan mount). The mount has three holes for 5m x 10mm bolts (the bolts that come with the metal frame upgrades), two in the upright position and…
Introducing the XRP Unicorn Saddle ! This saddle nests the XRP facing forwards or backwards, and secures it in place thanks the included TPU safety belt ! How is this useful ? It isn’t on its own, here’s a better question : how do you…
Box for Arduino Mega and Ramps shield for 3D printer (Rebel II)
I apologize for re-submitting this bracket but for some reason I could not add pictures I really like the case made by WRODZ https://www.thingiverse.com/thing:2397879 but for my Wemos Wi-Fi it was missing an add on for the SMA connector…
This is the alpha release of Sweetie Bot 2560's modular back (and also the first of her source files to get shared, huzzah !) It has four slots to slide in a module with appropriate attachments (such as the XRP saddle), and secure said…
This is for Voron, you need Work with Voron DIM Rail Mount.
Bit of a niche design, but made to fit an Orange Pi Zero 3 and Arduino Mega 2560 on a single plate as I am using it to drive parts of an older CR10s Pro. You will need M3 screws + M3 heatset inserts. And then be lazy and double sided tape…
I really like the case made by WRODZ https://www.thingiverse.com/thing:2397879 but for my Wemos Wi-Fi it was missing an add on for the SMA connector and a small space for my GPS antenna. Using existing vent holes I use 3 x M3 hardware and…
Attention!!! Since I printed the gears using ABS (printing with nylon is practically impossible with a 0.25 mm nozzle, and with a 0.4 mm nozzle, the gear teeth don't turn out as well), there is some shrinkage. There is a gap in the gears,…
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** No Supports: No **Resolution:** 0.2 mm Filament: Bambu Lab TPU TPU-95A Black Notes: Print with TPU and mount…
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
This is a Quick model i did for the 2 pin connectors the gt2560 needs for the endstops. (Recommend to print it 10% bigger) Print Settings Rafts: No Supports: No Resolution: 0.1 - 0.05 Notes: Print at 10mm/s Doesnt matter the infill…
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
Print with TPU and use double sided adhesive tape to mount the feet.
I designed this 3D printable mounting base for the Arduino Mega 2560 because I couldn’t find any good printable versions online of the original support piece that normally comes with it. When you buy an Arduino Mega 2560, you receive a…
