92 models
Atari 2600 Display Stand About This display stand is made to hold the Atari 2600 Console in an upright position while providing you with a slot to stow the hardwired cable and two slots to display cartridges in either an upright or…
Protect your console cart port from dust ect. Use supports, obviously. I do 3 walls minimum on all prints. 15% Infill.
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This second set consists of my nine favorite Atari…
Upper and lower fan wheel part separated, so printing won't warp the total, glue together to form one part
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This second set consists of my nine favorite Atari…
The standard HyperStar cable routers for the Edge HD 8" telescope work well from preventing diffraction spikes; however, they mount to the outside rim. Therefore, they can't be used with the Celestron rigid dew shield since it clips…
Makeshift replacement for Makita Part DA00000156, which is not available in my country anymore. I printed mine in TPU 95A since it's the best material for layer adhesion, temperature resistance and shatter resistance I have. CHECK THAT…
I lost the battery cover on my iBalance 2600 Digital Scale. I've had the batteries held in with a big piece of tape for a couple years. A couple days ago I realized designing and printing a replacement cover would make a great project.…
Inspired by this* design (which I will print myself) I designed a case for the Motorola battery. It fits right away - but it's a bit too wide. That's why I glued some fleece to the inside of the back. You could probably slice it at 98 or…
As a kid of the 70s, I enjoyed playing games on Atari 2600 and Atari 800 computer systems using the joysticks that came with the 2600 systems. Fast forward to now with Retropie and emulators, I wanted the real game experience with the…
A good friend of mine recently designed a replacement stick for the old Atari 2600 game console controller. https://www.printables.com/model/1033596-atari-2600-joystick-insert-upgrade I made a green TPU cover for the new stick, but…
A good friend of mine recently designed a replacement stick for the old Atari 2600 game console controller. https://www.printables.com/model/1033596-atari-2600-joystick-insert-upgrade The rubber boot for my old controller was in extremely…
Da das Atari 2600 leider von Haus aus keine Composite Anschlüsse besitz und die neuen TV Generationen keinen Analogen Antennenanschluss mehr haben, ist es schwierig die Konsole an ein TV Gerät anzuschließen. Im Netz gibt es viele…
Da bei meinem Atari 2600 Jr. leider ein Stift zum Öffnen des Cartridge Schutzes abgebrochen war und die Stifte leider am Gehäuse sind, suchte ich eine Möglichkeit zur Reparatur der Stifte. Leider kann man die Spielkassetten mit…
I wanted to use te Danalock with my ABUS PR2600 armor bolt lock but it would not fit out of the box. Also I did not want to buy the special lock for it because mine was ok. First I milled the key to fit into the space in the Danalock.…
Visit Jerrari3d.com for more related projects _________________________________ The RETRO GameStack system is a fully customizable and modular storage solution designed specifically for your Atari 2600 game cartridges. Unlike pre-made…
Upper and lower fan wheel part separated, so printing won't warp the total, glue together to form one part
_____________________________________________________________________________________________________ Parts _____________________________________________________________________________________________________ Part Quantity Link PLA Black…
The use of this bracket is entirely at your own risk. Always check first whether your wall is suitable and which plugs you need. Designed for GTA 2600 of Bosch. Printed on MK3S (PETG) The template is intended for marking on the wall. The…
a modified version of the Atari 800XL Display Stand to support the Atari 2600 Junior.
The Aluminum throttle mount that came with my boat, was too wide for my Bimini Top poles, pic 4. I designed a mount that was an exact fit for my SeaStar / Teleflex CH2600 & CH2700, it provides more space along the rail and also fits…
This is slightly longer than the original, fit my mounting plate better. I could not match the corners from the original due to the printing overhang angle. Use PETG for outdoor use, loctite 401 for PETG will make a great bond, use expoxy…
Remix of the table saw guide to fit wolcraft mastercut 2500/2600 or any table with 128mm between studs
Náhradní díl k vysavači listí PARKSIDE PLS 2600 A1 - vnitřní přepínací klapka, kterou se mění směr proudu vzduchu (sání x foukání)
This model is compatible with the lego system.
This is a simple desktop stand designed specifically for the Motorola MOTOTRBO SL1600 and SL2600 handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model…
This is a little shelf/rack for holding Atari 2600 and similar-size (e.g. 7800, possibly others like Intellivision?) cartridges. I intended it to be easy to print and easy to stack/superglue together as needed. The default model holds 4…
I bought new replacement CDI and Regulator Rectifier modules from Rick's Motorsports and wanted to sell my original working units, but would be missing the mounting plate.…
Problem bracket comes with 3 holes, but only one of them can clear a ¼" bolt (confirmed by manual) that same hole's ID is too big & even a wide headed SHCS will fall through the hole Solution the spacer steps the ID down to prevent the…
I lost the plastic clip held in place by a M6x10mm screw on one side of my new Speed & Strength 2600 helmet. After checking with the manufacturer, they do not sell this part outside of an entire new helmet. That seemed a bit excessive for…
🕹 Stackable Atari 2600/7800 Game Storage – Support-Free Print with Dust Covers Preserve your Atari legacy with this custom-designed, stackable storage solution for 2600 and 7800 cartridges. Each unit is built to hold individual games…
For back to school or for avid readers, here's the first set of Atari 2600 games bookmarks! I carefully recreated the design on the spine of the boxes that the game cartridges came in. This first set is of the initial nine games that we…
Heil PR40 FC2600 foam popfilter adapter Simple pressure fit adapter to fit a Reporterstore FC2600 foam popfilter, originally made for the Rode PodMic, on the HEIL PR40 . Which makes the mic look a lot more modern and cleaner. Especially…
I got an Atari 2600 My Play Watch for my birthday. It comes with a little magnetic USB charging cord. This stand has a slot to allow you to insert the charging cable into the stand, so you have a good place to charge the watch when you're…
Atari 2600 SNAC case. Switch lever will go through thick lever stay first and then through case then through thin lever stay. Use the thin lever stay on the inside of the case. Carefully push the switch lever through the stay from the…
I made this holder so I could store my Atari VCS/2600 cartridges inside VHS clamshell boxes. The holder is the size of a VHS tape, so you can just drop it in, but I suggest gluing it to the case so it doesn't rattle. Category: Toy & Game…
A breakout to install 4mm jacks to the front panel of the Keithley 2600 SMU. The used jacks are Hirschmann 4mm jacks. Backside connector is: Phoenix IC2.5/8-STF-5.08 PN:1825378
Atari 2600 Game Cartridge Holder About I've had my old Atari 2600 games sitting on a shelf disorganized for years like some sort of monster. I recently finally decided to do something about it and blah blah this model. This game cartridge…
This model uses Atari 2600 standard cartridges to make wall art. It also has (optional) provisions to display enamel pins along the borders. To assemble, place M3 nuts in the slots of the bottom and mid sections, and tighten sides on…
Recharge stand for Philips Norelco Shaver Model 2600 series Shaver came without a charger stand. I was too cheap to buy the one with a stand. I made one. Now all I do is place it in the stand and walk away while it recharges for the next…
3D gedrucktes Gehäuse für den Behringer 2600, ARP 2600 clone im Vintage design. Die obere Gehäuseabdeckung wird mit 4 Schrauben an den seitlichen Wänden verschraubt. Der Korg SQ-1 Sequenzer Gehäuseaufsatz wird mit 2 Schrauben auf der…
Schieberegler-Kappen für ARP 2600 Nachbauten wie den Behringer 2600 und TTSH. Auf der Oberseite der Kappe ist ein kleines Fenster (mit klarem PLA-Material zu drucken), so dass das Licht der Schieberegler-LED als dünne Linie angezeigt…
I made this model myself as I quickly have gotten obsessed with atari's, specifictly this model.
Hello, for my SFF mini-computer project, I designed a custom case for the Alphacool DC-LT 2600 water pump to fit my custom build. The flow is, in my opinion, already quite good, but could probably still be improved a bit. The threads are…
fits tightly in the outer most horizontal tip holder holes to mount unused tips vertically so the tips don't vibrate and fall off the pressure washer.
A vertical stand for the Atari 2600 Junior. OnShape Model https://cad.onshape.com/documents/6043124feb1ec9e03cd9821c/w/673d51ce4c1a4b12c6c4f411/e/246e58b5f3bfc448e476602c?renderMode=0&uiState=66ab55da2df1833a233293e4
This is a vertical mount I designed for my Rapoo K2600 Keyboard. It fits the keyboard tightly so that the keys don't rattle on vibrations. I've mounted it with two M6x12 bolts and T-Nuts to my 4040 profile. The screw heads need to be…
The standard HyperStar cable routers for the Edge HD 8" telescope work well from preventing diffraction spikes; however, they mount to the outside rim. Therefore, they can't be used with the Celestron rigid dew shield since it clips…
. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…
I purchased a new Atari 2600+ Pac-Man Edition and several new games, and wanted a holder that not only stored my cartridges but also the instructions. I designed this holder to be printed on a Prusa Mini+ without supports. It is quite a…
Overview The non-extended should take up roughly the same footprint as the regular cages, and the Extended will allow for HDD's that are missing the middle mounting hole to be mounted (Like some of the weird 8TB Seagate HDDs). This…
Makeshift replacement for Makita Part DA00000156, which is not available in my country anymore. I printed mine in TPU 95A since it's the best material for layer adhesion, temperature resistance and shatter resistance I have. CHECK THAT…
I lost the battery cover on my iBalance 2600 Digital Scale. I've had the batteries held in with a big piece of tape for a couple years. A couple days ago I realized designing and printing a replacement cover would make a great project.…
Print with a UV and chemical resistant filament. I used PETG. Press in an M4 square-nut and clamp with M4x10mm or M4x15mm Socket Head Cap Screw or Button Head Screw. I used Stainless Steel for both screw and nut. To install, remove one…
Use this replacement paddle wheel to fix you broken Atari paddle, or to change the color of your paddle. This paddle is better reinforced than the original. In the featured image, the left paddle is printed in ABS plastic and the right in…
This tiny cart display stand is the smallest you will find. I made sure there is just enough gap between the back rest and the lip for most cartridges. The non-card type cartridges look like they are floating due to the tiny size. The…
Modified the original design to fit the Raspberry Pi Zero. The full project I made can be found here: https://imgur.com/a/8NWwu9x Category: Video Games
Print off the parts, and paint as you see fit. I've included a printable template to allow you to cut out a sticker from a woodgrain drawer liner if you want to give it that more authentic feel. You can find the video on the build here :
Improved version from Ampera's box : Fillet everywhere pimped using Ryzen design Snapping system for some lids (see file name) You can also get a basic Zen 2 Badge for people who want to pimp their setup. You can get a blank lid fitting…
Lovely router by all reports (I haven't actually set it up yet), but the steep angled legs make the built-in mounting slots rather ridiculous. They're an inch away from the wall and tilted at about a 26-degree angle. CAUTION: Synology's…
This a a trophy that can only be bestowed to the Champion of the Yellow Castle. You know who you are. I put Radio Shack Yellow LEDs inside this thing, but regret using insufficiently bright ones as evidenced by this poorly lit video: I'd…
This is a replica of the crown featured on the box art of the 80's Atari 2600 game called Adventure... though in the released game, there's no crown to be found (to my knowledge, at least). If you are going to print this out using the…
This is a dummy battery for the Canon Powershot A2600. It has holes for passing wires through to the connectors in the battery compartment. I whipped this up just to test a camera that I'd found. Unfortunatelty the ubiquity of digital…
Simple bracket to hang the subwoofer of a Philips SPA2600 to the underside of, for example, a desk. I have used three of these brackets. It is required to screw into the underside of the speakers. I removed the original feet for a better…
This is a merger of 2 models: Atari 2600 Console - Keychain by Demolition88 and a minimalist wallet by 3dWorkBench. Attributions are printed into the wallet. Instructions is mostly identical to my NES Cartridge card wallet.…
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
Retro christmas ornament, depicting Harry swinging on a vine from the Atari 2600 game Pitfall!
This is an enclosure for the SainSmart TGS2600 Air Contaminants Sensor Detector so you can place it in the enclosure and connect it to a USB. My second upload any feedback would be appreciated. Size is 25mm Wide x 125mm Long x 30mm High…
Please use TPU or some other flexible filament with no supports
A support free, easy to print stand that holds 8 Atari 2600 Games.
GM / Chevrolet 1992-2020 Multi-Purpose Retainer (Part number: #22600404) for cargo / convenience nets, etc. I created this model to replace a missing cargo net hook for a Chevrolet C7 Corvette. Given the GM part number, it should be…
Another Tool holder for my Flashlight. At the same time its a stand, since its locked to the gridfinity block
These pond filters come with bio balls that hang out at the bottom of the chamber. There is a plastic disc that goes over them, but it has large holes in it that the balls fit through. If you pull the filters out to clean them, your balls…
I used my Prusameter points to sign up for the 3D Modeling in Fusion 360 course as soon at it was available. The second example project is to make this wheel, and at the end of the step-by-step instructions, the course invites you to…
You just need to drill 4 M4 holes in the plate with which you want to “close” your window. Then print the part and attach the outflow tube of the aircon with the adapter. You should be well prepared for the next heat wave- no matter if…
This is an Atari 2600 Paddle controller, designed to work with your computer to control volume, play/pause, and even add your own features. It is centered around an Arduino Pro Micro (clone board) and requires a rotary encoder and micro…
Atari 2600 Video Game Console with Joystick. Please resize to your needs. I think I need to make the joystick into earrings.
Over the past few years I have managed to break both cord hooks. So I just made new ones! These have been in service for awhile and are working fine. They should load up in the intended printing position and do not require supports. The…
I have made this design based off Atari 2600 console. Why? I wanted to feel a cool breeze now in winter of course. And also for drying up painted models :) Whole kit printed on PRUSA MINI+. Hardware used: Halfround M2x8mm screw - 4x (Used…
Public domain Wright R-2600 radial engine model by mark06gt . Originally uploaded to Blend Swap .
The led illuminated sliders of the Behringer 2600 (ARP 2600 clone) don't look that good, are a bit too small and the LED light is not shaped well to indicate the position. SliderCaps2600-slider_Caps_akf_BM is the final design but you may…
This may fit other Antec case models that use the purple plastic drive rails Print the rail on its side with normal supports. The correct orientation is shown in the pictures STEP file included for easy alteration
To assemble you will need to print our nut hammer and 4, 10x32 nuts and ½" screws If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay -…
Printed with 3 walls, 20% infill and a modifier to iron only the top of the model. I had to increase the size to 102% to fit all but one of my cartridges and 104% for the Air-Sea Battle cartridge. Add support blockers on the sides but…
Quad Lock GoPro mount for Magicshine RAY 2600 front light Magicshine RAY 2600 front light: https://magicshine.com/products/magicshine-ray-2600-light Quad Lock GoPro mount:…
This is a small modification to Carsten's design, for transparent filament.
This is a heavy duty wall mount for a Synology RT2600ac router. I used #8x1/2" screws to attach the router and #10x1-1/4" screws to attach the mount to the wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
