Search results: 26650

Counting matching models…

Printables

Battery box 2x26650

no support needed battery connecting boxes check on: https://www.printables.com/model/1119580-26650-battery-connecting-box

Order a print of this model

Printables

26650 Battery Gridfinity Storage (horizontal)

Gridfinity compatible bin which can hold 3x 26650 batteries

Order a print of this model

Printables

26650 battery storage

Should be printed at 105% size so it's not such a tight fit.

Order a print of this model

Printables

26650 4S Battery Bracket

A simple bracket for a DIY 26650 4S battery pack.

Order a print of this model

Printables

Interlocking 26700/26650 Battery Cell Holder/Grid

You can buy these connectors. But printing them is often faster. There is a two cell and a three cells version. Connect as many of them as you like, creating any battery size that can be larger than any print bed. The female side of the…

Order a print of this model

Printables

18650-26650 sleeve for iStck Pico Mega

The sleeve for 18650 batteries was lost for an iStick Pico Mega. The design is relatively simple. On the right is my replacement, on the left is the original from another battery carrier. Für eine iStick Pico Mega ging die Hülse für 18650…

Order a print of this model

Printables

26650 battery connecting box

no support needed Parts list: Screw M3x12 - DIN933 material: brass Screw M3x20 - DIN933 material: brass Hex Nut M3 - DIN934 material: brass Washer 4 - DIN125 material: brass (bigger by purpose) Copper wire d=2mm, L=66 mm (manually bended…

Order a print of this model

Printables

Battery box 2x26650

no support needed battery connecting boxes check on: https://www.printables.com/model/1119580-26650-battery-connecting-box

Order a print of this model

Printables

Parametric 18650/21700/26650 cell holder

OpenSCAD parametric cell holder for various cylindrical cells

Order a print of this model

Printables

18650, 21700 or 26650 Batteries Holder - 12 pieces (3S4P or 4S3P)

This one was designed to replace an ordinary 7A Pb battery in a PC UPC. Now: it holds much higher discharge current; has at least twice bigger capacity; you may charge these LiFePo4 setup with 15A current instead of Pb 0.7A; has less…

Order a print of this model

Printables

AkkuAdapter-26650-36650 kezu kh-w503

Order a print of this model

Printables

Maglite 2D to 2x26650 conversion

All you have to do is cut a ring or two off the big side of the spring, polish the inside of the cap with a dremel and wire brush or sandpaper so said spring makes good contact, then buy whatever 3-5W LED maglite bulbs you want for cheap…

Order a print of this model

Printables

26650 battery box x2

Box for two 26650 batteries. Printed with standard .20 SPEED profile on a MK4S with generic PLA.

Order a print of this model

Printables

26650 Battery Gridfinity Storage (horizontal)

Gridfinity compatible bin which can hold 3x 26650 batteries

Order a print of this model

Printables

DIY Powerbank 18650/26650 QC4.0 100W

A case for a power bank control board that fits 25x 18650 or x 26650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast…

Order a print of this model

Printables

LiIon 18650 to 26650 adapter

This is an adapter so one can use common 18650 LiIon cells instead of 26650 cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.34mm layer height and 0.4mm perimeter thickness. The cell…

Order a print of this model

Printables

LiIon 18650 to 26650 adapter

Three versions to use 18650 batteries in 26650 flashlights. Print instructions Print with vase mode and a 0.4mm nozzle to get the right dimensions.

Order a print of this model

Printables

Adapter 18650 to 26650

It is suitable as an adapter for use in a flashlight.

Order a print of this model

Printables

Battery holder 3X26650

A battery holder for 3 X 26650 batteries. I used it to power the RC-Dozer DIY instead of the original 16650 batteries.

Order a print of this model

Printables

26650 battery storage

Should be printed at 105% size so it's not such a tight fit.

Order a print of this model

Printables

uConsole bottom panel to fit 26650 cells

Bottom panel, Battery cover and CPU cover for the ClockworkPi uConsole. This is designed to fit my uConsole with 26650 cells and a Raspberry Pi CM5. It is printed in 3 parts - the back panel which replaces the original metal panel of the…

Order a print of this model

Printables

26650 battery holder and adapter to 18650 charger

18650 chargers and testers are very common, while 26650-ready slots are rare. With adapter you can charge 26650 battery in any 18650 charger or tester. Without adapter you can use it as regular 26650 battery holder. Double-slot version is…

Order a print of this model

Printables

20700 to 26500 / 26650 battery adapter

Remix of "18650 battery to 26650 adapter" by Orjakari (thingiverse.com/thing:4187707). 20700 to 26500 / 26650 battery adapter Snug fit. Tested with Sanyo NCR20700B 4250mAh lithium cell. The fit depends on your printer settings and the…

Order a print of this model

Printables

18650/21700/26650/26800 snap holders

You can buy these from me here! Consider supporting us on Patreon! These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800. I print these out of PETG for the toughness. My builds use a 0.6mm nozzle…

Order a print of this model

Printables

26650 to 18650 adapter

to use 18650 in a 26650 torch

Order a print of this model

Printables

4S 26650 LiFePO4 Battery Pack Case

I made a small case to house 4S LiFePO4 to have a carry-around-sized battery in the 12V nominal range. I used salvage A123 26650's. You'll want to print of 2x of the cell holders, arrange the batteries in them, and spot weld the batteries…

Order a print of this model

Printables

Screw-Lid 26650 Battery Holder

You can buy these from me here! Consider supporting us on Patreon! These 26650 battery holders with a screw lid are incredibly tough and rigid! Designed for use with unprotected button top and flat top cells. Print the bodies out of PETG…

Order a print of this model

Printables

Battery Holder for 4s 26650 Pack

This is a battery holder for a 4s pack of 26650 size cells. I made this primarily for powering my Sound Devices MixPre-D, but you could use it for other stuff too. It consists of 3 parts.... a case, an inner support that holds the…

Order a print of this model

Printables

26650 LiIon / LiPo / LiFePo - TX16S Battery Lid

Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…

Order a print of this model

Printables

26650 - Spotweld Helper 2x/3x/24 - Holder

Spotwelding helpers for 26650 batteries / LiIons. The Circles for the batteries are 26.5mm wide - if your printer has wide tolerances, make it bigger or smaller, that it fits your needs. For me the 26.50mm works perfect in ABS, but you…

Order a print of this model

Printables

Akku-Adapter ->26650 auf 18650

Adapter um Akkus für eine Taschenlampe wo 26650 eingesetzt werden auch Akkus 18650 zu benutzten. Siehe Bilder verschiedene längen/höhe kann in der Z-Achse geändert werden

Order a print of this model

Printables

26650 4S Battery Bracket

A simple bracket for a DIY 26650 4S battery pack.

Order a print of this model

Printables

Multiple Battery Holder Box for AAA, AA, CR123a, 18350, 18650, 21700, 26650/26800

You can buy these from me here! If you like our models, consider giving us a 1 time donation! I print these using a 0.6mm nozzle with 0.2mm layer height using PETG They are very durable!

Order a print of this model

Printables

4 x 26650 Battery Holder - 26650 Akkuständer

holds up to 4 26650 batterys in place

Order a print of this model

Printables

21700 battery to 26650 or 26800 sleeve for Vase mode

Print in Vase mode, no floor layer. Should take only 40-50min in most 0.4mm printers. Might need spacers to work in a 26800 flashlight, I used 4 of the Convoy 26mm spacers for my D4Sv2. Printed using 0.4mm Ender 3 v2 Designed in FreeCAD…

Order a print of this model

Printables

D-cell Battery to 18650 / 26650 adapter for Maglite

Li-ion safety warning For use with “ protected ” li-ion cells only. Unprotected cells can be discharged too much making them hazardous when re-charged. Older Maglites are sealed tubes with rubber o-rings at each end. In the worst-case…

Order a print of this model

Printables

Dummy Li-Ion batteries - 18650, 21700, 26650 & 26700 - Fast printing

This is a set of dummy batteries, on each of: 18650 with button on top (yellow) 21700 flat top (green) 26650 flat top (white) 26700 flat top (blue) I use these to make battery enclosures etc. They are safer than using real batteries,…

Order a print of this model

Printables

Gridfinity 26650 battery holder

Diameter of the hole is 27mm

Order a print of this model

Printables

26650 5x5 cell holder

5x5 cell holder for 26650 Lifepo4 or LIPO cells with busbar Category: Tool Holders & Boxes