P
PrintablesDavide Bucci
L298N Motor Drive
Model of L298N DC Motor Drive Controller Board Dual H Bridge
- Downloads
- 1,160
- Likes
- 12
- Rating
- 0
Search results: 298
Counting matching models…
P
Printablesjcp
L298N Dual H-Bridge Motor Driver Controller Board Case
Protective, low-profile snap-fit case for the L298N Dual H-Bridge Motor Driver Controller Board . Both the top and base have port and pin header cutouts with an exposed heat sink. The base comes with dual side mounts and a central bottom…
- Downloads
- 594
- Likes
- 21
- Rating
- 5
P
Printablesthall72
Lego Compatible (3298.dat) Slope Brick 33 3 x 2
This model is compatible with the lego system.
- Downloads
- 462
- Likes
- 32
- Rating
- 0
P
PrintablesShmilCat
L298N Case with Zip-Tie closure and Screw holes for placement
L298N Case with Zip-Tie closure and Screw holes for placement Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA Wood Category: Electronics
- Downloads
- 454
- Likes
- 21
- Rating
- 5
P
PrintablesAtom's Lab
L298N Case
This is a case for the generic L298N module. It has a slide on top, and openings to reach the terminals. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 300 Microns Infill: Doesn't matter Notes:…
- Downloads
- 249
- Likes
- 6
- Rating
- 0
P
PrintablesNebbish
Arduino UNO case with room for L298 motor shield
This is intended for holding an Arduino UNO with an L298 motor shield on top of it. The cover is a snap fit with access to the L298 connection screws. This was printed at .2mm layer in PLA.
- Downloads
- 170
- Likes
- 12
- Rating
- 0
P
PrintablesLordEvilFish3DP
L298N riser
A simple L298N riser, it raises the motor controller 5mm above the floor, it helps protect the controller from scratches. Dimensions (mm): 43 x 43 x 5 Average print time with 0.4mm nozzle 70 mm/s print speed 0.2 layer height = 25 minutes…
- Downloads
- 168
- Likes
- 5
- Rating
- 0
P
Printablesthall72
Lego Compatible (2989.dat) Technic Brick 1 x 4 with Holes and Bumper Holder
This model is compatible with the lego system.
- Downloads
- 155
- Likes
- 23
- Rating
- 0
P
Printablesplex41
Plattformerweiterung Bird Feeder by Merandey https://www.printables.com/de/model/22982-bird-feeder
Einfach und schnell zu drucken. am besten in PETG Kein kleben kein support nötig 2x drucken !!! nicht spiegeln !!! Easy and quick to print. best in PETG No gluing, no support necessary print twice !!! do not mirror !! This is a small easy…
- Downloads
- 149
- Likes
- 58
- Rating
- 5
P
Printablesfirewolf8385
L298N Motor Driver Holder ORP
An ORP-Compatible holder for an L298N Motor Controller. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design rules,…
- Downloads
- 146
- Likes
- 8
- Rating
- 0
P
PrintablesYPUpro
Trim removal oem BMW 83 30 2 298 505
The BMW 83 30 2 298 505 wedge is a specialized tool for automotive use, particularly for BMW vehicles. It is used to safely and efficiently remove or install various interior and exterior trim pieces, clips, and panels without causing…
- Downloads
- 143
- Likes
- 12
- Rating
- 0
P
PrintablesDaystrom
L298N Spacer Mount
Recommend Printing in PETG or something with good heat tolerance considering the heatsink. Can be incorporated into existing 3D models, screwed, or glued in place. Optional mounting caps included in model.
- Downloads
- 141
- Likes
- 3
- Rating
- 0
P
Printablesbglasford1
L298N Mounting Plate
This mount has a minimum footprint, best suited for gluing down. Use four M3x4mm screws to hold the L298N board in place.
- Downloads
- 121
- Likes
- 2
- Rating
- 0
P
PrintablesCHÍ TOÀN
L298N-RED module Case
This model used to cover L298N red type module.
- Downloads
- 121
- Likes
- 5
- Rating
- 0
P
PrintablesspingoogL
LM298 H-Bridge Base
Simple base for a very common H-Bridge board. Uses #4-40 Hardware, as the hex holes are 1/4" across flats. Category: Electronics
- Downloads
- 114
- Likes
- 5
- Rating
- 0
P
Printablesxwing
L298 Board support
Support for L298 bridges, single and double.
- Downloads
- 98
- Likes
- 3
- Rating
- 0
P
Printablesctheroux
L298D Motor Driver Mouning Plate
This is a mounting plate for the dual motor driver board that uses a L298D. They are widely available. This mounting plate serves three purposes: act as a spacer between the mounting surface and the board (4 mm) prevent scratching the…
- Downloads
- 95
- Likes
- 5
- Rating
- 0
P
PrintablesNotLikeALeafOnTheWind
Din Rail mount for L298N Motor Drive Controller Board
A din rail mount for an L298N Motor Drive Controller Board. The board we used: https://a.co/d/cqiP37h You will need to print a tab to lock this mount to the rail. It can be found at: https://www.thingiverse.com/thing:3401942 or…
- Downloads
- 93
- Likes
- 9
- Rating
- 0
P
PrintablesTol
Redmond RHB-2983 blender repair kit (coupler, adapter)
The top part of the original adapter has turned into mess and melted and I had to guess its dimensions, so it's not a 100% copy of it, but it is 100% compatible :) As I see it in the photos from internet, the original adapter has 6 holes…
- Downloads
- 89
- Likes
- 8
- Rating
- 0
P
PrintablesCryp7o
L298N H-Bridge motor driver mount
a screw / cable tie mount for an L298N H-Bridge motor driver
- Downloads
- 86
- Likes
- 5
- Rating
- 0
P
PrintablesAlien3D
L298 Dual H Bridge Motor Speed Controller Mount
Mount for L298 Dual H Bridge Motor Speed Controller https://amzn.to/3wRm0ml
- Downloads
- 85
- Likes
- 7
- Rating
- 0
P
PrintablesLegacy_Micro
BASIC MODEL HW-298 USB QC 3 MODULE
BASIC MODEL HW-298 USB QC 3 MODULE
- Downloads
- 78
- Likes
- 5
- Rating
- 0
P
Printablesjimmiedave
Wiha 8-Screwdriver Rack for Set 30298
This rack holds all 8 drivers, in handle-size order from left-to-right. The slot is just a teense tight for the #3 Phillips-head driver. Would redo this if I could. Maybe your slicer can open it up just a little. 1mm should do. Note:…
- Downloads
- 72
- Likes
- 11
- Rating
- 0
P
Printablesctheroux
Solarbotics L298 Compact Motor Driver Mounting Plate
Solarbotics L298 Compact Motor Driver Mounting Plate. Bottom mounting holes are on 1/2" boundaries. Mounting post are 5 mm high. This thing is compatible with the Arduino Due Mounting Plate ( http://www.thingiverse.com/thing:127512 ) and…
- Downloads
- 71
- Likes
- 0
- Rating
- 5
P
PrintablesMoxL
Avatar LN298N Arduino nano Simhub Shakeit Motor box enclosure
LN298N Arduino nano Simhub box enclosure I could only find a payed version, here is mine. You can find my wiring included for 12v version, I've used RK370 on my Fanatec CSL pedals. These STLs can be found in my other designs. Happy racing.
- Downloads
- 69
- Likes
- 11
- Rating
- 0
P
PrintablesSandre4
Steelseries Hub (61298TX) Holder
Steelseries hub (61298TX) holder i printed with PETG and it took around 4 hours. (tight fit) I choose PETG for durability to put hub in this holder Used 0.2mm line height with supports. But maybe you can print without ;)
- Downloads
- 68
- Likes
- 7
- Rating
- 5
P
Printablesrotoli
A0029880181 Clip Mercedes Benz Verkleidung Druckknopf Viano Vito W639
A0029880181 Clip für den Daimer, gedruckt in PETG oder PLA, ca 15 min.
- Downloads
- 66
- Likes
- 5
- Rating
- 0
P
Printablesavlis13013
Thule 1500052986 or Thule 52986 Cover Cap For Thule Evo Raised Rail
Replacement Cover Cap For Thule Evo Raised Rail. This is part number 1500052986 or 52986. I lost two of these so far, so I made a printable replacement in SolidWorks. Print in FLEX or TPU TPU supports are tough to remove but you don't…
- Downloads
- 65
- Likes
- 2
- Rating
- 0
P
PrintablesBrokenTooth Designs
L298N + ACS712
Places current sensor on top of L298N. Requires M3 x (35) or 40 screws
- Downloads
- 59
- Likes
- 7
- Rating
- 5
P
Printablesalexb
ESP32 & L298N Mounting Plate for OSWW (Open Source Watch Winder) – Mod/Upgrade
This project provides a custom mounting plate designed to securely attach an ESP32 (30-pin) , L298N motor driver , and a 15mm Rocker Switch (2-pin) to the OSWW (Open Source Watch Winder) . The plate is specifically tailored to fit the…
- Downloads
- 57
- Likes
- 5
- Rating
- 5
P
PrintablesCHÍ TOÀN
L298N-B-Green-Case
Case for L298N-B-Green module. it used for L298N-B-Green module only not fit with L298N-Red module.
- Downloads
- 56
- Likes
- 2
- Rating
- 0
P
PrintablesShmilCat
Mini L298N DC Motor Driver Case
NOTICE !!! - This is for the L298N Mini! not the regular driver. The case is closed by a zip tie and includes mounting holes the mini does not have the heatsinks, the screw connector or the enable input. however it is smaller (and…
- Downloads
- 52
- Likes
- 4
- Rating
- 0
P
PrintablesFrankWL
Arduino Montagerahmen für L298 Motortreiber-Platine
Arduino Montagerahmen für L298 Motortreiberplatine Print Settings Printer Brand: Anycubic Printer: Photon Resolution: 0,2mm Infill: 20% Filament: Anycubic PLA red Category: 3D Printing
- Downloads
- 51
- Likes
- 7
- Rating
- 0
P
PrintablesMath
DIN Rail Mount for L298N motor control driver / double H-bridge
This mount places the L298N motor controller on your DIN rail, saving you some space in your electronics assembly. It fits this motor controller board from e.g. Reichelt:…
- Downloads
- 48
- Likes
- 2
- Rating
- 0
P
PrintablesMichael Samblanet
Bestep L298N Housing
I have a L298N motor driver board that does not match the housing available on Printables, so I made my own housing. Board is labeled as a "Bestep" L298N" Consists of a main body + friction fit lit. While I added some ventilation slits,…
- Downloads
- 47
- Likes
- 2
- Rating
- 0
P
PrintablesStar Blink
Remixed Plattformerweiterung Bird Feeder by Merandey https://www.printables.com/de/model/22982-bird-feeder
ENG: Easy and quick to print. Best in PETG No gluing, no support necessary print twice !!! do not mirror !! This is a small easy to print platform extension for Merandey's bird feeder (print size 100% ) ----- GER: Einfach und schnell zu…
- Downloads
- 43
- Likes
- 9
- Rating
- 5
P
PrintablesCallmelee
Obtsacle Avoiding Robot using L298N
This is another version of the obstacle Avoidance robot using Arduino Board. all the files are printable, watch my video for making it, The video here: https://www.youtube.com/watch?v=v97VBkiN7e8&t=340s&ab_channel=LeeCuriosity It takes me…
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
Printablesfabse-hack
L298N Lego mount
L298N LEGO Mount Integrate your L298N motor driver seamlessly into your LEGO projects with this custom mount. Designed for compatibility with standard LEGO components, this mount provides a stable and reliable platform for your motor…
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesTobi
Schleifstift für Proxxon BS/A 29810 Schleifband 330mm / SanderPen for Proxxon belt sander
Ich habe die Größe angepasst, so passen die 330mm x10mm Schleifbänder des Proxxon BS/A 29810 Bandschleifers
- Downloads
- 36
- Likes
- 9
- Rating
- 0
P
PrintablesChristopher Andrzejewski
DROK L298 Dual H Bridge Motor Controller Vented Case
Newly Updated** I took the well thought out generic l298n Case, provided originally in its original form by Atom's Laband, and rebuilt it from the ground up to support a bigger l268 and amended ports. I have included 1 variations: ( My…
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
PrintablesPEDRITO LOQUITO
Puente H L298N a escala 1:1
Este modelo no esta echo por mi: Creditos A Lemos
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
PrintablesShmilCat
Double L298N Case with Zip-Tie closure and Screw holes for placement
This is a case for 2 L298N boards, if you need two and don't want to use two separate cases :-) Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15-20% Notes: should print fine with any…
- Downloads
- 31
- Likes
- 0
- Rating
- 0
P
PrintablesJEO
Ryobi Expand-It RY40002 Bump Head Part: String Guide #529803001
Somehow the center piece of my bump head disappeared. I used two pictures I found to make a working version. Basic standard settings for printing. About a 45-minute print.
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesKDM3Dmodels
L298 motor driver
This is for creating circuit diagrams in a 3D model
- Downloads
- 24
- Likes
- 5
- Rating
- 0
P
PrintablesAlex
L298 Module Bottom Cover
Clip-on bottom cover for a 44mmx44mm L298 module PCB. ✓ Prevents the module from scratching your desk. ✓ Enables you to place the module on conductive surfaces. ✓ Clip-on, no screws. The sample in the photos is printed in PLA, 0.2mm layer…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesHes
Gridfinity Pittsburgh Pro 1/4" Metric Deep Color-Coded Socket Organizer (Harbor Freight 67868/61298)
Designed from the ground up for clean, durable toolbox organization using the Gridfinity system. This model was inspired by the excellent tool organization work of RobNordic, but every dimension, fitment, and feature in this design was…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
Printablesctheroux
Solarbotics L298 Compact Motor Driver Drilling and Mounting Plates
This thing contains a mounting plate and a drilling guide for the “Solarbotics L298 Compact Motor Driver”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesFredrik S
Case for SKF Feeler Gauges 729865 B
3 files: I have uploaded 3 files, one variant for the bottom part and two variants of the top part. One with text and one without. Tolerances I have designed the parts with 0.2mm of clearance between sliding surfaces, so they slide…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesOmer Droub
Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesSaleh Hasanli
L298N motor driver case
This is my first project that I make it can be inaccurate. You can tell what is wrong in model
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesSaleh Hasanli
Updated L298N motor driver case
You can put your motor driver. Updates: L298N Logo, more curved edges, space for 2-sided tape
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
Printablestmorris9
Craftsman CMHT82298 4.5" cutter cover
I use little side cutters a lot and just got 2 new pair of these Craftsman ones (they seem pretty good quality for $7). Anyway I always end up with these in a tool drawer and want to protect the tips but also my hands when I rummage…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
Printablesartyfarty
Smallrig 2987 to IKEA HEJNE
Well, this thing allows you to attach relatively cheap Smallrig 2987 directly to HEJNE. It has enough thickness to allow pressing on the release button. You put two M6 hex-head bolts in it, then attach the adapter to 2987 via either…
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
Printablespeter.skotte
Servo mount for HK PZ-15298A
Servo mount for HK PZ-15298A servos. This mount can be glue/attached to the servo plate (also found on my page) or simply mounted in the airplane. The servo is meant to be on its side. Category: R/C Vehicles
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesbudikutija
AppleDesign Keyboard M2980 Key Plunger
When cleaning the keyboard, one plunger broke off because the plastic was brittle, so I designed a new one. Printed in PLA with 0.1mm layer height. Just press the part2 into part1 and you are good to go. For me it is a tight fit so didn't…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
Printableshubert felix
energizer compact charger V-2988 gridfinity 2X3
allows you to store your old energizer charger flat, in a gridfinity style
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesChristopher Andrzejewski
New custom tray for rack supporting DROK L298 Dual H Bridge Motor Controller
Newly Updated** I love this raspberry pi rack made available from jonthemiller! I needed a tray that would support a DROK L298 Dual H Bridge Motor Controller and rebuilt it to support a L268 and amended ports. with ventilation. I have…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesSatzende
L298D Motor Driver Mouning Plate + esp32 mount
Kann mit https://www.printables.com/model/263841-smars-l-v01-arduino-mega verwendet werden. Bietet platz für ein ESP32 Wroom32 modul das Original stammt von https://www.printables.com/@ctheroux
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesMaximlv
laptop mount for mount-it drawer MI-7298
need 3 m3x20 for left side, 3-5 m3x8 screws for right side and m3 nuts. fit 220mm plate diagonally fits MacBook Air 13. onshape link…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesOnur NEŞVAT
Stor Perde Motor Kutusu V5 — ESP-01 / L298N / JGY-370
Stor perdenin boncuk zincirini 12 V redüktörlü DC motorla hareket ettirmek için tasarlanmış, duvara monte bir motor ve elektronik kutusu. Gövde, sökülebilir ön kapak ve kasnak olmak üzere üç baskı parçasından oluşur. Zincir kılavuzu…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesMolGod Scientific
4-Chloro-3-nitroanisole 3D Molecular Model — CAS 10298-80-3
4-Chloro-3-nitroanisole (C7H6ClNO3, CAS 10298-80-3) — a free educational 3D molecular model for teachers and students, by MolGod.org. Read the atoms directly: each sphere bears an engraved element symbol. An STL file stores shape only,…
- Downloads
- 1
- Likes
- 1
- Rating
- 0
P
Printables
Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
P
Printables
Modular XL Storage Drawer - 480mm x 298mm x 27mm
Two part XL Storage drawer with various compartment sizes for precise sorting and storage, ideal for crafts etc.
P
Printables
ORGANIZZATORE GT298
ORGANIZZATORE GT298 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
P
Printables
Mercedes Benz Hood | A1298880116 | Bonnet Emblem 57mm |
FDM friendly version of the Mercedes hood emblem, optimized for 0.4mm nozzles. Will give even better results when printed using 0.2 or 0.25mm nozzle and 0.1mm layer height In three versions: Fully blank emblem plate and insert in one…
P
Printables
Modular XL Storage Drawer - 480mm x 298mm x 27mm
Two part XL Storage drawer with various compartment sizes for precise sorting and storage, ideal for crafts etc.
P
Printables
BOX 298 x 250 x 130mm
This is sturdy Box with wallthickness of 3,2mm (wallthickness is similiar to most tuper boxes). Recommended Setup: Material: PLA CF or PETG CF Nozzle: 0,6 or 0,8mm Layerhight: 0,4 mm or 0,6 mm Max. Volumetric Flow: adjust it that you…
P
Printables
Lego Compatible (42988.dat) Minifig Hair Half & Half
This model is compatible with the lego system.