Uchwyt klucza udarowego Milwaukee M18 FMTIW2F12
Jeden z elementów organizacji warsztatu
Print approx. €10.63–€13.00 excl. taxPreliminary estimate for one variant
- Downloads
- 93
- Likes
- 11
- Rating
- 0
186 models
Jeden z elementów organizacji warsztatu
Print approx. €10.63–€13.00 excl. taxPreliminary estimate for one variant
Replacement grips for a Beretta M9/92FS Spacer is not required, but may be useful if grip bolts are longer than normal due to original handle thickness.
This is a case I made for the ESP12F 4x relay board, like this one: https://www.banggood.com/AC-or-DC-Power-Supply-ESP8266-WIFI-Four-way-Relay-Module-ESP-12F-Development-Board-Secondary-Development-p-1794113.html It is designed to just…
Case, designed for NX4832F035, but can fit for all similar models. Print parameters Supports: No supports necessary, place it facing down if you have enough cooling
Revy's guns, the Berretta 92f Cutlass, from the anime Black Lagoon The gun should be sized to the size of an actual Berretta 92f. I am in the process of printing so I am not sure if everything fits together perfectly. Update 12/20/22:…
Another version of a pistol stand Separated the logos/text/magazine to print in multiple colors Includes a few logo variations and M9/92FS text Included assembled versions in case anyone wants just a single print You can only use 1 logo…
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Speed loader for the Beretta 92FS Magazine, designed for efficient magazine loading. It is printed using PLA/PETG filament with a 20% infill for a good balance of strength and weight. Printing Instructions: Filament: PLA/PETG Infill: 20%…
2 foot tall Gizmo Files are ready to be sliced and printed. Some part will need supports. You can pick and choose which ones based on how well you know your own printer If you make this please comment or mark as you made. Really…
This adapter uses the original clamping mechanism as the original stand for a quick and easy way to use the monitor on a monitor arm or the original stand. Since Vesa 100 uses M4 screws, it supports M4 nuts (key-width 7 mm) or heat set…
Mit diesem praktischen Kettenhalter kannst du deine Schmuckstücke ordentlich und übersichtlich aufbewahren. Der Halter bietet Platz für bis zu 12 Ketten oder auch Armbänder, sodass nichts mehr verknotet oder unordentlich herumliegt. Die…
ctf_2fort comes to your desk in this small printable model form! The model comes with its .stl file, .3mf project file and a pre-prepared lower print time low quality .gcode file for a 16cm long print for the Prusa i3-mk3s+. If not using…
I am using this in a project to add Euclid and a hard Z end-stop to my Creality CR-6. Dimensions are accurate based on published drawings from the manufacturer. At this point, I think only the frame, stepper motors and main-board are…
Red Bull 12floz and 8.4floz Cup Holders so they don't spill over in regular size cup holders. I took a road trip recently, and when I take a road trip, I drink Red Bull. I've taken a liking to the blueberry flavored and it only comes in…
Included in the attachments is the parametric Fusion 360 design and the label design
I resized and adjusted the great model from @dewgenenny. It fits the 8x Relay board now, what I changed apart from the size was: replaced the guides to fit M3 screws and nuts (the nuts I fixed with superglue in place) Changed the holes to…
I needed a way to store my coffee, handheld radio, extra sectionals, and a couple of pens in the 172F while flying. Rather than paying $400+ for a flimsy injection molded part, I designed a sturdy console that is not intended to be…
Printed socket for ESP8266. I am using it to place ESP in PCBs. It can be used also in breadboards, just be careful when inserting it. Pins are to be added curving copper cable without any plastic cover. Cable wire has to be bended as a…
For use with 24-22 AWG wire. Hard to solder while holding the the soldering iron, legs, and wires at the same time so I created this jig to hold at least the D2F-5L but I left the top open so most other variants should be able to fit also…
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
This is a functional and aesthetic case for the STM32F429-DISC1 board. Gives access to all of the necessary GPIO pins/inputs, screen, and peripherals. The case is a 2 piece design with a bottom and top shell. Assemble with 4-M3x12 socket…
Basic, small plaques with 3D raised text I used for my Jada FNF diecast collection. If printing at 0.2mm layer height, you can do a filament change at layer 16.
Gridfinity Holder for Komelon Self Lock 12ft Tape Measure
Inverseur pour clé Milwaukee M12FIR14 inspiré du modele de Ratchet Knob non vendu en europe (https://www.ratchetknob.com/shop/p/12-magnetic-one-finger-reversible-ratchet-knob) Les aimants ont un diametre de 6mm x 4mm…
You need 4 7mm standoffs and bolts to build this case. The bolts fix the topcase to the electronics and the standoffs. The big hole on the backside is closed, too.
Couldn't find any printable case for my new dev board, so I went to design my own. While doing it, I had to model the board itself first. This is a simplified 3D model of the new Black Pill development board with stm32f4xx (I got the…
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
Kleines Gehäuse für Kabelverbinder 2fach WAGO ähnlich für Kleinspannung, keine Zugentlastung PLA 15% Infill
A simple case for new black pill dev board (version with stm32f411x, should be compatible with stm32f401x, not to be confused with old black pill with stm32f103). No screws needed, top should snap on the bottom. Bottom holes should fit…
This is a 1x1 for storing inexpensive craft acrylic paint. While there are some 3x1 containers floating around, I don't like expanding past 1x1 unless it adds more storage due to diameters. This should work for most of the 2 fl oz ( 59ml)…
Two Surface mount designs for Dahua VTO2202F-P and VTO2202F-P-S2. The OEM part is VTM115. I designed this because Aliexpress delivered my doorbell but cancelled my order for the case, so it was designed based on the doorbell and not the…
We made the mistake of keeping the arm held high on our 12-foot Home Depot Skeleton, and over the months, it began to tear away from the shoulder mount. We quickly designed and printed an inner and outer reinforcement plate. Recommend…
This is my Beretta 92/m9 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
In Fusion 360 gezeichnet, auf Vellemann K8200 mit 0.2mm Layerhöhe und 0.5er Düse aus PLA ausgedruckt
Xiaomi Mijia m365 Fender Bolt Caps
this model is a remix of a 92fs magazine that i filled in and then spliced it with a 10/22 hanger from the awesome makes above. this is a very crude model and i may in the future make it better. i will be testing the durability of it…
Badge holder with slot for Deepnet Security SafeID Mini security token. Two layouts available. The "side" layout is a bit more compact and nice if your lanyard attaches in two places. My lanyard clip only attaches in one place and the…
This model is compatible with the lego system.
This is a remix of the model on Thingiverse from JooztNL and a modification by @DirkHoefle (THX to both) This model combines the base with the closed design and the lettering on the top is rotated 180°. The original design has slight…
Remix of https://www.thingiverse.com/thing:6779075 as I couldn't fin one that fit my 2F. Smaller layer height makes the case fit much better (the pic has 0.3 layer height).For the micro SD card you'll need tweezers!
A magazine adapter I made to use with full size mags with my 92FS Compact without overinsertion issues. Even out of PLA survived quite a lot of falls on concrete without issues.
This is a small license plate for your RC cars or model cars that reads 2FAST4U so when you are racing your RC cars all your friends know you are to fast for them. I made this because I could not find another good license plate like this…
This is similar to other cases but not quite the same, its been designed around the AZDelivery board that I purchased through Amazon ( AZDelivery NodeMCU WiFi Lolin V3 ESP8266 ESP-12F Internet Development Board Module (32mbit) Flash…
Adapter not tested, designed based on theoretical dimensions. Needs testing Safety cannot be guaranteed! Treat this as last resort option. I recommend to seal with silicone / tape.
Badge Holder with various options for different 2fa tokens. Deepnet Security SafeID/Mini Yubikey Badge holder is thick enough to hold 2 cards together. The SafeID/Mini requires a button press to activate the screen. You can simply squeeze…
HP 32F Monitor Vesa Adapter really wanted the ability to raise/lower my 32F LCD. found other Vesa adapters for smaller HP Monitors here on thingiverse, but none fit my 32F. works really well. be sure you trust your printer/filament Print…
In Chinese motorcycles, the oil filler neck is sometimes inconveniently located at the back of motor. This funnel is designed for easy oil changes. Personally, I use it on a motorcycle with a 172FMM motor Sineray X-trail-250.
This is a combined container for both TB6612FNG and NRF24L01 for a more compact setup for the custom remote control receiver for RC. There are three (3) files in this 1) one with bottom opening for motor driver and normal NRF24L01 version…
Adapter is not tested, designed using theoretical dimensions, needs testing if fits nicely. Safety cannot be guaranteed! Treat this as last resort option. I recommend to seal with silicone / tape.
Software and assembly video here: Case is ideally held together by either melting with a soldering iron or just using glue. Electronics Used (Including Purchase Links) WeAct Studio STM32 Core (STM32F405RGT6):…
A mount for the cheapest Decathlon handheld bike pump (ref: 8056700 ), designed for an O2Feel Peps N3 folding bike from 2016 (with the Samsung battery). It is equipped with 19.2 mm tube where it was mounted on the photo. It was designed…
Bracket to hold two CNSUNWAY 2ft LED shop lights on a metal closet pole. Closet pole is a metal pole measuring 27mm in diameter. Shop lights are CNSUNWAY 2ft shop lights Amazon link:…
This is a simple Case for the 4channel relay boards with a esp8266/esp32: Models: https://templates.blakadder.com/ESP12F_Relay_X4.html / https://devices.esphome.io/devices/ESP-12F-Relay-X4…
I was excited to make MrFlippant's excellent Bowden Speed Loader, but I have about 100 Omron d2f style microswitches in my parts bin, and none of the one listed in the BOM, so I did this quick remix. All other printed parts besides the…
Adapter to 3M mask that allows to fit respiratory filter DAR (22F15M) Untested, designed on theoretical dimensions. Safety cannot be guaranteed! Treat this as last resort option. I recommend to seal with silicone / tape.
Hikvision base, one tilted by 14°, one normal. With hole for a PG16 grommet for ethernet cable. Included small grommet/end cap for microphone cable, if you have "-IS" version. A low ring is for testing. Layer 0.25mm, Nozzle 0.4mm, Infill…
Software and assembly video here: Case is ideally held together with 15mm M3 self tapping screws. Electronics Used (Including Purchase Links) DIYMore STM32F407VGT6: https://www.aliexpress.com/item/1005002186031065.html 2.42 SSD1309 SPI…
************ Updated Model 1-21-26 ************ Fantastic work by @53Aries, as this was a definitive-needed mod, as the stock filament run out sensors consistently have filament get caught and stuck. This issue is even worse if you use a…
I don't usually do prop weapons, things not tied to a video game. But I got a request so... Please find attached the parts to make simplified, printable versions of a standard Beretta 92FS, the modified Underworld and the Equilibrium…
I made a table saw for my Dremel 3000 a while ago. My wife uses the 2Force multi-tool for her hobby projects and also wanted a mini table saw. I have therefore adapted the base and made it suitable for her 2Force mulitool. For a video and…
The casing consists of two elements connected in a sliding manner, providing safety to the board and an aesthetic appear
simple case for ESP12F board with relay.... Print Settings Printer Brand: Prusa Printer: I3 MK3S Category: Electronics
PolarityGear Fidget Toy 2.0, Current version FT2e. I occasionally make adjustments based on feedback. So please provide feedback if you have any issues putting it together, etc. Changes include: -Tighter fitting parts for higher quality…
Marlin 2.1 Kingroon KP3S mks_robin_nano_v1_3_f4 STM32F407VET6
This is a small addon for the eBox Lite to cover up the filament guide hole, which caused a great deal of lost heat and increased humidity for me. Fits with all filament types, however I recommend Polypropylene because it allows for an…
Updated the Backplate to make the Sensor more reliable.
VKG-2F Viking for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • vkg-2f4.stl The…
Supermicro X10SDV-4C-TLN2F IO Shield with optional cuts for extra USB 2.0 ports. For the extra USB ports I used this adapter: Internal 9-pin to double USB 2.0 A panel mount adapter . The extra USB cutouts are added with negative volumes…
Simple adapter to mount 92mm fans onto Supermicro X10SDV series. I tested with X10SDV-4C-TLN2F . The adapter can be seen in this video: Supermicro X10SDV with Xeon D-1521 for your home server or NAS .
V6 Bowden hotend mount dzino3Dv2FS, contains four different versions , Fan30x30x10, inductive proximity sensor M8
Remix of the Wall Mount for Lenovo M11 Tablet (2024) to fit a Lenovo K11 plus to be used as a Home Assistant dashboard. Using Inslogic WoodFill Maple PLA, the 0,2mm balanced profile and ironing, this came out nice using my Prusa Core One.…
I wanted to make a large shop flag so this is what I came up with. The top layer is a single monotonic line and I hid snap links underneath so it can all click together. See the 3MF file for the height modifier to get this effect. Design…
AI is weird, four horn triceratops and now 2-fin dolphins. Apparently these are a thing though (at least according to Google's AI) - dolphins with two dorsal fins are a thing and referred to as twins. This was in my backlog and a simple…
Small case designed with the STM32F405 feather board in mind. It has a button for the reset switch and a slot in the rear for memory card access. No provision for LiPo battery connector or I2C (yet). Also tested and working with Bluefruit…
M32F25 + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
slight change from original removed bottom access holes (I don't need them, I access all gpio pins from the top, bottom is just allowing crap from the table to make shorts) had to cut of pieces of pcb support as on number of boards…
Needs 2 screws for each mount. Print in vertical orientation for strength.
Hai I like to inform to all that our name changed from 3DDesign Desk to Aakaar Lab. Our new logo is also uploaded. This design is for a 4 ch relay control iver wifi ESP8266-12F module. Category: Electronics
I created this model mostly because I couldn't find an existing model to meet my specific needs. Here are a few things to note about this print: Print time was ~4 hours for the box and ~4 hours for the lid on a Bambu Labs P1S. Box…
This is a simple STM32F429-DISCOVERY enclosure, without screws, just snap-in connections. Cack site is for dust sensor.
I m designing all my Brio compatible tracks as female only which I then combine with a connector as needed, this is to ensure a snug fit between the tracks as I have got a few different brands and the play between the tracks can be…
It is the same as original (see https://www.printables.com/model/1053284-standalone-filament-sensor-happy-hare-ercf-tradrac ), just for different lever version. I like the bigger arc of D2F-L30 more.
This is a mount that for an D2F y-endstop switch for the FYSETC cnc mounts for the Voron 2.4/Trident motor mounts
brings to you an HO Scale wooden billboard in 8ft & 12ft for your mode railroading experience. At our goal is to provide free information to all model railroaders about model trains and the hobby. Learn how to build your own model railway…
Recently, I purchased a Dahua video doorbell, but it didn't come with a mounting box. Not wanting to spend over $20 for one, I decided to design and create one myself. The box I designed has M4 screw holes on the back, which are spaced…
This IO Shield is specifically for the S7103GM2NR-2F-L2 model of the Tyan S7103. The Fusion360 file is provided so modifications can be made to suit other variants of the motherboard. Print Settings Rafts: No Supports: No Infill: 20%…
Took the PinkBatman blank slate mount plate for 2fiddy and added mount for the Runcam Thumb, this is compatible with thing# 5357689 by ThrottledEarwig. Connect them up using a m3 x 16 screw and m3 nut. I modified this in Fusion and had to…
Replacement filament entry sensor for the Q2. Uses 4mm ball bearing, D2F switch, ECAS and an M2x8 screw(switch mounting). Some m2 screws are larger than 2mm so go for m1.8 maybe.
Included in the attachments is the parametric Fusion 360 design and the label design
Sparkfun (PID 14451) Motor Driver - Dual TB6612FNG (1A)
It is designed to fit a long range antenna for the DJI FPV system. I still have some improvements to make but it’s getting there!
One Way Flow Restriction Valve for standard hospital filter (22F/15M) Print instructions use pet-g 0.3 mm from transparent flat sheet as Valve membrane 35 mm diameter (valve1_15m_4.stl ) Print valve1_15m_2.stl in rotated position so that…
Frame for STMicroelectronics evauluation board STM32F750F-DK.
holder for orico tcm2f-c3 ssd m2 hole for M3