Counting matching models…
This allows you to remove the 2 to 1 hose adapter and use a single 4" hose. It has a single hole for the original screw that is used to hold the original adapter in place. I used some thin foam insulation tape to help make the connection…
This is a 42HP 3U Eurorack case. The structure is interior. With the high side version it may interfere with some modules at the left and right ends of the rack. A version with low sides is also provided for reduced interference with…
A set of two different 2HP eurorack panels for cable management. One version has two less pegs to facilitate hand tightening of knurlies.
Ok, so I mocked up my stock, store-bought Harbor Freight 2HP dust collector, so I could plan for rearranging its parts to make my setup 2-stage instead of 1-stage. In these screen shots below, the plan for the new setup is on the left,…
Bracket to mount the CUAV C-RTK 2HP Hellical GPS Antenna . The antenna press fits, use M5 Screws to mount the bracket. The Antenna is raised to allow a radius bend with the SMA cable Print in PETG.
When converting Harbor Frieght 2HP dust collector from 1-stage to 2-stage by adding a * Super Dust Deputy 4/5 , you can use this adatper part I designed to connect its "Y" to the Super Dust Deputy 4/5. The Harbor Frieght 2HP Dust…
This is a blank tile for Eurorack, 1U 2Hp
How's this for niche? I built a model of the basic shape of the radio, a Baofeng UV-82HP, and subtracted ( OpenSCAD difference() ) that shape from a cupholder base I created (based on a large fast food cup). Added a slot to hold my cell…
The video explains it all. You'll need a 5/8" hex bolt and nut for this to work, preferably at least 6" full thread. Let me know if you have any suggestions for improving the design. I recommend printing with something strong with good…
This is a blank tile for Eurorack, 3U 2Hp
12HP storage trough for sd cards, USB sticks, guitar picks etc. I had a need to keep some loose things around when I'm playing and this solved the need. Nothing special or complex here, just a hole to throw your stuff in. Enjoy! I hope…
Briggs & Stratton 22 Hp flywheel starter ring gear. Print it from nylon or other heat resistant material. Works well if the original ring gear has weared out. Tried out PTGE - this material will deform if the engine is hot. Nylon works…
These flanges are used to convert a standard Harbor Freight 2HP dust collector into a Thein Baffle. The intake converts a 4" PVC to 5" to match the intake port on the unit. The unit has the following characteristics/mods: Blower exhausts…
A simple stand for the Panels i am building. Included blends so you can edit away. Category: Music
A simple bracket to hold the C-RTK 2HP in place. I didn't want to risk it coming loose inside my rover , this bracket adds some support. It holds the C-RTK 2HP firmly , I would also add some double sided tape. Mount the bracket with M4…
This adapter can be used to mount bigger swivel wheels with a mounting hole pattern of 44x58 onderneath your Whirlpool air conditioner/heater like the PACW212HP (and maybe the PACB212HP, but not confirmed). The increased height is needed…
This is a front panel for a 2HP passive eurorack multiple and attenuator. The potentiometer needs to be thin enough to fit under the panel. I added some photos of the potentiometer I used. You need to connect all of the tip lugs of the…
Whirlpool PACF212HP intake adapter & exhaust brackets (parametric, PETG) Parametric FreeCAD adapter set for the Whirlpool PACF212HP W portable air conditioner. It ducts both the intake and the exhaust side to standard Ø150 mm aluminium…
This is a 12HP 3U Eurorack pod. The structure is interior. This variation has low sides to facilitate units being combined in a row. Units can also be stacked. The rail “nuts” are 3D printed and are self-tapping with M3 bolts*. Rack units…
This mod allows you to reclaim the 4HP taken by the power module in the 2HP Lunchbox. You just need to print the two L & R STL twice and slide them inside the sliding nuts holder. Each bloc has a small hole that fits a square sliding nut.…
Panels for my Eurorack build. THESE PANELS ARE 130mm!! I have included the blend files so you can resize to standard Euro format. These are just for my build, but most of the work is done for you. This is a panel i designed to throw in…
How's this for niche? I built a model of the basic shape of the radio, a Baofeng UV-82HP, and subtracted ( OpenSCAD difference() ) that shape from a cupholder base I created (based on a large fast food cup). Added a slot to hold my cell…
This is a 42HP 3U Eurorack case. The structure is interior. With the high side version it may interfere with some modules at the left and right ends of the rack. A version with low sides is also provided for reduced interference with…
This adapter can be used to mount bigger swivel wheels with a mounting hole pattern of 44x58 onderneath your Whirlpool air conditioner/heater like the PACW212HP (and maybe the PACB212HP, but not confirmed). The increased height is needed…
This can be helpful in converting your Harbor Freight 2HP Dust Collector from a 1-stage to a 2-stage unit, which is what I did by way of adding a * Super Dust Deputy 4/5 . If you're limited on ceiling height like I was in my basement,…
The blinds have clamping studs, so you can put your favorite building blocks on top and organize your cable mess or make your modular truly special and unique! Eurorack blind with clamping studs on top different sizes: 4 HP, 6 HP, 8 HP,…
This is my first ever Printables post! I hope you like it. I have tested it and it fits perfectly. don't forget to like the design!
I created this to have a convenient place to store screws. also features a system to prevent the drawer from falling out. please click the like button, and dont forget to post a make! : )
Made up some port covers for my 12hp Briggs and Stratton Vertical engine (281707), used them for storage while the carburettor and exhaust were removed. also used the covers for painting, they are in no way perfect for each application…
Panels for my Eurorack build. THESE PANELS ARE 130mm!! I have included the blend files so you can resize to standard Euro format. These are just for my build, but most of the work is done for you. This is a panel for LMNC's Super Simple…
Panels for my Eurorack build. THESE PANELS ARE 130mm!! I have included the blend files so you can resize to standard Euro format. These are just for my build, but most of the work is done for you. This is a panel i designed to fit LMNC's…
Got inspired and made a Super Simple Oscillator from Look Mum No Computers Video. 'The simplest DIY Oscillator? Synth Project PART 2' I couldn't think of a housing for it so i designed a Eurorack plate (12HP) for it and a stand for when…
