Counting matching models…
Ball marker for the rapsodo mlm 2 pro Originaly designed by Kevin Wood (facebook) and tested by multiple people and me. Comments: - Sharpy or other waterproof marks can leave marks on an impact screen - Use the blacked marker you can…
For Radxa Zero 3W/E,use official Radxa 5519A heatsink with 1703 fan(SUNON UF3H3-700) connect to +3.3V/GND. Use 4xM2.5 heat set inserts and 4xM2.5*10 countersink screws to fasten the Cover and the Bottom. For Radxa Zero 2Pro,using official…
Anycubic Kobra / Kobra 2 / Kobra 2Pro - V-slot aluminium profiles 4040 V-slot aluminium profiles 40 x 40mm
cover iphone 12/12 pro da stampare in materiale flessibile con protezione lenti e bottoni
For me, a very good slicer profile (PrusaSlicer) for Anycubic Kobra series printers (2/2 Pro/Neo, etc.). Still undergoing my testing, but I already rate it as very good. Please ensure proper bed height and dimensions to avoid…
I wasn’t satisfied with the results using the stock Creality profile, so after dozens of hours of calibration, I’ve implemented my own tweaks. The print quality has significantly improved. I have also switched from CrealityPrint to…
I wasn’t satisfied with the results using the stock Creality profile, so after dozens of hours of calibration, I’ve implemented my own tweaks. The print quality has significantly improved. I have also switched from CrealityPrint to…
Creality K2/K2Pro display assembly (non-official - reverse engineered)
I have created a modified version of the P2 pro cover from: https://www.printables.com/de/model/374516-infiray-p2-pro-thermal-camera-case The inlet from the original packaging was taken over with the dimensions of 60x50 and another…
no supports needed 15% infill on standard settings for pla
This is a refinement of the previous version of my Riser Corrections: - increased ventilation area by 50%. - the design of some facets has been slightly tweaked to closely resemble the design of the K2 Pro. - the connection tolerance has…
I liked the original model but needed it to be magsafe compatible so I added slot a cutout for the magnet array and snap-in lid. You can buy the magnet array online or do what I did and salvage them from an old magsafe case. It can be a…
I bought this stand for my MLM2PRO but the Ryobi laser level wasnt visible in my garage's lighting. I got this laser level off Amazon but it was too big to fit in where the original level went. I designed this adapter to utilize the…
This is a mount for the Infiray P2Pro with microlens on a stereo microscope with a diameter of 54mm. The working distance of the stereo microscope is 100mm and the mount is approximately adapted for the P2Pro with microlens. This allows…
Ender2Pro-BlTouch BLTouch bracket for the Ender2 Pro Installation This should work with the M2.5 nuts/screws provided with the BLTouch or you can use M3 screws (with no nuts). Note: When using M3 screws, you will be tapping directly into…
Attachment to allow you to add alignment stick to level for MLM2PRO. There are two parts. The piece that goes in the laser hole and a piece to put at the end of the alignment stick so it is level. I used drive way reflective sticks from…
LCD Frame for Wolf-2Pro Hamradio Transceiver uses 4x 4x2mm magnets
This is a tool drawer insert and cover sheet for the Ender 2Pro. Print flat on bed with no support. Printed with TPU , 15% infill , 0.2 layer. Optional cover sheet printed in TPU , No infill , 0.2 layer. (added cut out in cover to fit…
you will need some screws to connect the cover with the original pc-cover, i also used some double sided sticky-tape on the 30° slope. If you use it together with my rear dust cover you may have to trim the front a bit.
Tronxy XY2-Pro sidebox Extension microSD microSD Slot M6 nozzle in the drawer or SD & microSD in the drawer 4040aluminum frame Category: 3D Printer Accessories
Take 360° Panorama Pictures with your iPhone 12Pro / iPhone 13Pro at 0.5 focus. With another case (Halterung) it's maybe possible to do it with an other mobile phone. You need a tripod and a 360° Rotator to take pictures, a stiching app…
you'll need 2 M3 x 10 screws to fit it onto the rear damper stay. the original pc-cover slides just under it.
Description This is a functional remix of the Rapsodo MLM2PRO Leveling Stand designed to make setup faster, more accurate, and compatible with a wider variety of hitting surfaces. Key Improvements: Integrated Bubble Level Sight: I have…
ES Impreso con boquilla 0,4mm y altura de capa 0,2mm con soportes de arbol angulo de umbral 30 filamento usado Smart material Reciclado amarillo 45'21" tiempo de impresión. EN Printed with 0,4mm nozzle and 0,2mm layer height with tree…
I used this case: JJC Memory Card SD Card Storage Waterproof SD Card Box Case for 12 SD Cards and 24 Micro SD Cards: https://amzn.eu/d/2j87dFN I completely removed the foam for the insert and left the bottom layer in the lid
Side cutter holder to go on spool mount for ender 2pro. Print upright as it is, with no supports and no infill
Gombík na vyrovnanie základnej dosky. Pre Creatity Ender 2PRO. Výška vrstvy 0,16 mm.
Waste Bin for Creality K2 / K2 Pro Compact waste bin designed for the Creality K2 and compatible with Creality K2 Pro. It is intended for collecting filament purge during printing. The bin attaches with magnets, allowing quick…
RX container for Tamiya VX-02 Pro chassis. I recommend printing the container from PET G and the seals from TPU/FLEX. 6 pcs of M2.5x12mm screw are needed to screw the container together
The Case has Camera cap which is slide & fit, At middle it has illusion ring which creates illusions (Inside-Outside), This refresh the mind & distract from the stress. Also Reduces the screen time for kids as well as adults. My son love…
LCD Frame for Wolf-2Pro Hamradio Transceiver with 7mm height
Simple Knurl Knob bolt for leveling the stand.
Ender2Pro Umbau Creality Board durch SKR Mini 3 v3 ersetzt Schublade mit Platz für Pi3 und LM2596 Interne Kabelverlegung Meine erste Config, ohne Gewähr, mit funktionierenden Display An der Bodenabdeckung muss die abtrennung entfernt…
Yes, I agree, this is absolutely nothing special (except for maybe that I was able to fit each EarBud case into a 1x1 bin. However - I first tried to download various bins from the model archive, printed them and they didn't fit. So ……
Rúčka na dosku k tlačiarni Ender 2PRO s otvorom na držiak kamery C270 Logitech.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Dashboard shell for iPhone 5S with 2 type of mounting, Fanatec CSl wheels and DD SimCube 2 Pro. The software I use is SimHub There is also the design for the iPhone4 that I have been using before Category: DIY
This is a remix from https://www.thingiverse.com/thing:2220436 Tronxy XY2 Pro left sidebox https://www.thingiverse.com/thing:4719400 Drawers are common I am Japanese. I'm not good at English. Print Settings Printer: tronxy xy2pro Rafts:…
Needed to be able to see the heater controller for a 300 watt titanium heater through a smoked glass door. This will mount on either side of the glass with Alien tape and be right up against the glass so the display shows through. This…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
REMIX slides are fixed and added my own logo on it :P and also the text ender 2 pro just because i can ;)
I hate how ugly the back side of my PC fan is, so I mede a cover to use over the botton fans. I also made pins to fixate the cover on the fan and it fits very well. I made it in PETG with: 2 walls 3 layers up and botton 10% infill…
COMMENT YOUR COUNTRY IF YOU WANT IT TO BE ADED
Ein Stabiler Halter für die Bürstenrolle vom Dreame H12PRO passt bestimmt auch bei anderen Modellen, jetzt liegt diese nicht mehr nur so nebenbei.
I wanted to mount my BTech radio to my lido mount in the car to add 2m and 7cm to my existing Yaesu Ft-891/ATAS setup. The LIdo Style Female Mount by ppennza will mount perfectly to the Lido ENT adapter plate, but I needed the male part,…
CZ: Držák bagu WildMan pro koloběžku Xiaomi Mi Scooter Pro2. Vytisknout 2x EN: WildMan bag holder for Xiaomi Mi Scooter Pro2. Print 2x
It is a case for a single-board computer, printed in PCTG: one box (~4h print time) one cover (~3h print time) 4 screws 2.5x16mm needed to close the case.
This is a refinement of the previous version of my Riser Corrections: - increased ventilation area by 50%. - the design of some facets has been slightly tweaked to closely resemble the design of the K2 Pro. - the connection tolerance has…
I wasn’t satisfied with the results using the stock Creality profile, so after dozens of hours of calibration, I’ve implemented my own tweaks. The print quality has significantly improved. I have also switched from CrealityPrint to…
I wasn’t satisfied with the results using the stock Creality profile, so after dozens of hours of calibration, I’ve implemented my own tweaks. The print quality has significantly improved. I have also switched from CrealityPrint to…
REMIX slides are fixed and added my own logo on it :P and also the text ender 2 pro just because i can ;)
Waste Bin for Creality K2 / K2 Pro Compact waste bin designed for the Creality K2 and compatible with Creality K2 Pro. It is intended for collecting filament purge during printing. The bin attaches with magnets, allowing quick…
Simple Knurl Knob bolt for leveling the stand.
I used this case: JJC Memory Card SD Card Storage Waterproof SD Card Box Case for 12 SD Cards and 24 Micro SD Cards: https://amzn.eu/d/2j87dFN I completely removed the foam for the insert and left the bottom layer in the lid
Engineered for a perfect fit on the Rapsodo MLM2PRO. It will help protect the fragile front glass from dropping or knock over. I recommend printing in TPU but it also work well in harder materials.
I made a fitting that would be able to attach to the K2pro and accept segmented pipe pieces below. I have tested the prototype print for a couple of prints and it works flawlessly I have also added a cutaway at the top to be able to see…
Lamp stand for installations official Ender 3s1pro lamp, for Ender 3v2, because the lamp is longer the lamp
TROXY XY2 Pro BMG Print Settings Printer: tronxy xy2pro Rafts: No Supports: No Resolution: 200 Infill: 80 Filament: eSUN PLA Category: 3D Printer Extruders
