Search results: 2v

Parkside 12V battery holder

In case someone needs CAD data, send me message. I can share it STEP, PARASOLID, PRT, CATPART …

Bosch 12V battery holder

Holder for Bosch 12V battery I edit inside shape (-0.1mm) - some of you had to applied offset...

Bosch GSR 12V-15 Battery Screwdriver Holder

Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…

Bosch 12V battery holder

A holder for 5 x 12V Bosch batteries. Easily attached to a wall using two screws. Upper layer can be printed using a different color for a nicer finish (see pictures)

Bosch 12v GSR/GDR Drill Driver Impact Wall Holster

Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…

DeWalt 12V + 20V Battery Holders

I know there are a number of holders available for the DeWalt batteries but I decided to design/print my own after seeing complaints of “too tight” along with not seeing options for both the 12V and 20V battery sizes, not to mention the…

Bosch Professional 12V / 10.8V tool wall holders

I'm organizing my Bosch 12V power tools on a sheet of plywood on the wall in my workshop. With these 3D printed mounts, I can easily and safely hang my Bosch tools when they are not in use. All the tools hang on their battery socket. It…

Bosch-12V_Battery-holder

Bosch-12V_Battery-holder - No Support There might be a slight variation the the dimensions of the batteries. this model should fit 3A (My 2A batteries have a slightly looser fit)

NSFW Penholder (2Versions!)

Bosch GSR 10.8/12V wall holder

It is a remix of one design found here but i can not find the link now. It is shorter and i added one version with angle in case of mounting under the shelf. (As I did) Print Settings Printer: Pinky Rafts: No Supports: No Resolution: 0,4…

12V Car Plug

Fits any standard 12V plug Friction fit, no rattling Easy to take in and out

PARKSIDE 12V battery holder

battery holder

Milwaukee 12V 2.0Ah Batteryholder

This is a battery holder for Milwaukee 12V 2.0Ah batteries. I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit for 4.0Ah…

Bosch 12V battery holder

Bosch 12V battery holder Simple holder for ther 12V Bosch professionel batterys. I was searching for something that protects the batterycontacts. i can't find something that fits my needs or works right out of the printer. So i have to do…

Car 12V plug cover

Car 12v plug cap No support Material: Pet-g or ASA (the temperature in the car can be higher in the summer)

BOSCH 12V GSR Drill FlexiClick Attachments Holder

Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…

DC UPS (5V, 9V, 12V) based on LX-2BUPS module

DC UPS based on LX-2BUPS module (5V/9V/12V, with a USB Type-C power connector). This is useful for powering internet switch/router during a power outage. If you need 5V UPS with USB output, use this design instead. Aug 2024 update: I…

BOSCH 12V Drill - Holder for e.g. Bosch GSR 12V(-35)

Holder for Bosch GSR 12V-35 (and other similar) Drills (most 12V Bosch GSRs should fit) Also see my other Holder for the different attachments (drill chuck, L-piece, etc) Printed in Prusament PETG (Prusa Orange) and holds up very well…

Makita CXT Battery Mount for 10.8V / 12V

Simple wall mount for 10.8V / 12V Makita CXT batteries. Keeps batteries organized and safe. Category: Tool Holders & Boxes

12V PARKSIDE Battery Adapter

The adapter for the 12V PARKSIDE Battery lets you click your battery in and use it in your projects! Step files and F3D files are included so that you can change the shape of the adapter to your needs. Electrodes made out of 0.5mm thick…

Bosch 12V battery feet

This is a battery attachment for Bosch 12V 2Ah and 3Ah batteries for their power tools. With this you have a stand for your lamp, drill or other power tools. You simply clip it in with some force and can remove it with a flat screwdriver.…

Bosch Professional 12V Akku Halter

Druck am besten mit PETG. Die Akkus werden eingeclipt und halten daher auch hängend.

Halter für Akkuschrauber Bosch GSR 12V-15 / Holder for cordless screwdriver Bosch GSR 12V-15

Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.

Parkside 12V

Support mural de batterie Parkside 12V. Battery holder Parkside 12V

Halter für Akkuschrauber Bosch GSR 12V-15 FC / Holder for cordless screwdriver Bosch GSR 12V-15 FC

Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.

Enclosure for XH-M609 Low Voltage Disconnect 12V 24V 36V Over-Discharge Protect For 12-36V Lithium Battery

The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…

BOSCH GWS 12V-76 Toolholder

Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.

1V 2V 3V 4V 5V 6V Connector for Geodesic Dome with customizer

Remix from existing designs, i would like a hub generator to enable everyone to do it own. Hubs works with 1V, 2V, 3V, 4V, 5V, 6V geodesic dome Strut profile : rectangle or round use Dromerama calculator to get Strut sizes :…

12V portable power bank (4S LFP 128 Wh) with USB charge/discharge

Remix from original idea by OK1BT @yourmum_52499 TNX! 100W discharge test BOM 4x LiFePo4 10Ah [ 1 ] or [ 2 ] Operate with terminal ↑UP 3x short 8x M6 nuts 8x M6 cable eye 1x QC4.0 QC3.0 PD 5A 100W [ 1 ] or [ 2 ] IMPORTANT! Check if you…

Parkside battery holder - 12v soldering

Remix of https://www.thingiverse.com/thing:3274648 Parkside Battery adapter to fit new Parkside battery Tested and works on PAPK 12 A2 01/2020 production Also PAPK 12 A3

Milwaukee M12 Charger 12V Wallmounts Damage Free, Skadis, Screwless option

Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…

Battery wall mount for Bosch GSR 12V 2Ah

I couldn't find a wall mount for the batteries of the Bosch GSR 12V, so I made one. It can be fixed to the wall with two 40mm screws. The holder is slightly tilted for convenience. Update 2023-11-12: Added a non-branded version

Makita 12v CXT Tool Holder

Screws to a shelf to hang 12v CXT Makita tools from the battery interface. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Tecor PLA+ Black Category: Tool Holders…

Festool Battery holder 12V

Festool battery holder 12V - simplify your tool management Tired of searching for your power tool battery? Mount your battery on the wall for quick access, while organising them according to their charge status. Make your everyday work…

Flashforge Adventurer 5M (AD5M) LED mod accessory - buck converter MOUNT for inside back of printer (24v -> 12v inline, etc) v1.0

NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…

Hilti 22V Battery Adapter

Easy printable Hilti 22V battery Adapter with low supports. I used this for the current connection: HELLA 8KW 863 934-003; 2,8 x 0,8 https://www.amazon.de/gp/product/B008ZZ6Q9Q/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

12V H11 bulb load test light

Cup to hold H11 55W lightbulb. Can be used for load testing of automotive or other 12V circuits. The cup prevents bulb burning your hand or car interior while testing. There are small holes in the cup wall to allow better visivility of…

Corsair 12VHPWR Cable Comb (Slim)

Remix of Eduard3D's model. This version allows the cables to sit closer together. The hole diameter is the same, I just changed the spacing between them. This version is specifically made for the Corsair 12VHPWR cable, as it only features…

Battery holder for Bosch Blue 12V battery

This compact holder can be screwed or glued under a shelf and holds a Bosch Blue 12V battery. It prints without supports in horizontal or vertical orientation.

Bosch 12V Battery Holder Wall Mount

This battery holder is perfect for securely organizing your Bosch 12V batteries. Batteries are firmly held in place with a satisfying "click" (similar to inserting a battery into a Bosch tool), so you can mount the holder in any…

6S2P/12S1P Lightweight 22.2V 21700 Battery Holder for R/C Air Projects

This 3D-printed battery holder is designed for 21700 cells and supports configurations of 6S2P or 12S1P, making it ideal for lightweight R/C air applications. The design ensures durability and stability while keeping weight to a minimum,…

Modular Router Plate for Bosch GKF-12V

Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…

BIQU H2V2s quick mount + EBB42 + nice fan

I present a complete set of quick assembly of the Biqu H2V2s extruder. The kit includes the EBB42 adapter, a complete fan duct using the 5015 fan (modified design of @MarcoZ76_408) and a quick assembly tool (modified design of crazy…

MT-SYSTEM Holder: BOSCH Battery Holder 12V (Halter für BOSCH-Akku)

Now you can arrange your Bosch batteries as you want it. This holder fits perfectly to the original batteries. Available in TWO versions: Mounting on profiles: The holder has a mounting hole for a M4 screw to fix it on an 20x40mm…

Bosch GEX 12V/18V-125 C35 Adapter

Just another vacuum adapter for the combination of GEX 12V/18V-125 with Boschˋs ClickˋnˋClean system or C35. Itˋs modified to fits stronger to ensure that the adapter can not release. Printed in PETG recommended. Itˋs a remix from…

Best Dewalt Battery Mount With 2 Screw Holes & Notch for 12v Too

I printed with PETG, 15% infill, 0.20mm quality settings, no support. I printed these standing up as they would be mounted on a wall. The notch was made in PrusaSlicer using the “add negative volume/box” tool.

makita 12v adapter (nicd) to parkside battery

adapter uses 2Ah parkside x12v team battery

Starlink mini Netzteil 12-48V mit Step-up Booster für original 15m Kabel / Power Supply for 12V and 15m cable

(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…

Bosch Professional 12V Akku XT60 Adapter

Adapter from Bosch Professional 12V Akku to XT60

Bosch GSR 12V-35 FC L-Boxx Mini inlay

This 4 piece inlay for Bosch/Sortimo L-Boxx Mini stores the Bosch GSR 12V-35 FC with its accessories and nine ¼'' Bits. The L-Boxx mini has to be modified a little to make it fit unfortunately. The back-left slot has to be removed with a…

Hilti NURON 22V Tool Holder / Mount

A 3D printable wall mount designed for Hilti NURON 22V power tools such as drills, saws, and impact drivers.

Hilti 22V Battery adapter

A Adapter designed to conact to the main terminals of the Battery. I have designed this to be used with an RC charger to charg small Drone Batterys on the go. Pro: The Battery has under voltage Protaction, Balancing functions and lots of…

Circle router jig for Bosch GKF 12V-8

Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…

Makita 12V CXT Battery Connector

WARNING: The Makita CXT batteries do not appear to have built in battery protection, hence you will destroy them if you over discharge them. It is recommended that you fit a 3S BMS as part of your build. The terminals are designed to take…

Milwaukee 12V 2.0Ah Batteryholder Long

This is a battery holder for Milwaukee 12V 2.0Ah batteries. (Long Version) I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit…

Bosch 12V battery adapter to Makita

Battery adapter for Bosch cordless screwdriver 12 volts to Makita battery 14.4 volts.

Bosch 12v battery holder

made in PETG 3 walls

Parkside X12V tools holders

Tool holders for Parkside X12V series. I did not find any proper wall mounts fot tools so made them for those tools that I currently have. I included a shape that fits inside X12V tools in place where original battery is( in Fusion 360…

Tobsun 12V/24V to 5V cover

Cover for the Tobsun 12V or 24V to 5V converter found in the Voron 0 BOM. Is also usable for powering a Raspberry Pi on most 3D printers.

Bosch 12V Charger Wall Mount v2

This is a drop-in replacement back plate for the Bosch 12V charger (model GAL12V-20) that allows you to mount the charger to a wall. The mounting slots allow the charger to be mounted either with the text right-side up or upside down. A…

Parkside bateria 12v

Soporte para pared, baterías parkside de lidl, 12v.

MAK Military Style 12V Power Bank

12V Pb power bank, ideal to drive 12V COB LED light strips, i.e. in a gun safe internal installation, where no other power source may be available and the safety is valued. Pb battery is much more safer than modern LiIon/LiPo batteries –…

SKADIS Bosch / Dremel 12V Charger Mount (GAL 12V-20)

Just remove the two Phillips-screws put the bracket in and screw them down again.

Bosch Professional 12V 2.0Ah Batteryholder

This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. Note: Does not…

Terminal Adapter for 12V 7Ah Battery Type

This is an insulating terminal adapter for a 151x65x93mm SLA battery. For my hobby applications I wanted to have a safe connection to avoid unintentional shortcuts and additionally have an integrated fuse directly at the battery terminal.…

Bosch 12v battery base

This is a battery base for the newer Bosch 12v battery modules, which also fits the Dremel 6250+ battery units. I designed this to replace a battery base that I damaged when opening the battery. It can serve as a basis for modern battery…

Mounting bracket for Parkside X12V charger PLGK 12 A3

Created a little and simple screwable mounting bracket for Parkside X12V charger. Print with 3-4 perimeters, 0.2mm layer. Designed for PLGK 12 A3 but maybe it will fit other chargers It is best to print it standing up as it is in the file

Bosch GSR 12V-15 wall mount

Just a little mount I made for my beloved Bosch GSR 12V-15 drill. Fits nicely, it's not too thight so you can easily store your drill in it. ------------------------------------------------------------------------------------ V1.1 Update…

TOBSUN DC-DC 24V/12V to 5V converter din rail mount

TOBSUN DC-DC 24V/12V to 5V converter din rail mount Based on the VoronUsers 2 channel relay mount and I also added the unmodified Voron 2 DIN rail clip for your convenience. This fits the DC-DC converters which are e.g. part of the Voron…

osVAC neo Adapter for Bosch GEX 12V-125 Orbital Sander M32 and F32

This is a osVAC M32 adapter for the Bosch GEX 12V-125 orbital sander. With the F32 counterpart for the original dust collector. There are 3 models: Bosch 12V M32.stl: the standard model. Bosch 12V M32 Tight.stl: a tighter version. For…

Wallmount 12v holder for Bosch, Milwaukee and Parkside batteries

Holds Bosch, Milwaukee and Parkside 12V batteries. Takes two 4x35mm screws, assuming 30mm depth wall plugs. Battery clips in for retention. It is possible to pull the battery out without pressing the release since the underside of the…

Bosch GOP 12V-28 holder

Holder for Bosch GOP 12-28

A23 12V Battery Holder Box

Holder box for A23 12V battery, compatible with battery connectors 8.8 mm wide like the ones on the photos. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: 3D Line PLA…

Barbecue BBQ EDF Blower Bosch 12V Battery

You need 6 Screws M3x8 , Servo-Tester-Board, Brushless Outrunner 2838 (Front Mounted!), Small ESC, Mini Power-Switch 9 x 13 mm. Maybe you have to adapt the hole in the Fan for the Motorshaft.

Gridfinity BOSCH 12V battery holder

Just a nice Gridfinity holder for the BOSCH 12V battery

Holder for Bosch Blue 12V cordless drill

A holder for the 12V Bosch professional cordless drill. It can be screwed or glued under a shelf. Print in vertical position for strength, when printed with the flat side down it tends to break. This holder was inspired by the more…

Makita CXT 12V 1-4 Place Battery Non-Latching Holders Mount

Makita CXT 12V (10.8V) 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 253mm x 17mm overall. No supports needed. Print on edge as pictured. Edit: Added V2 40mm holes and labelled. Tool holder…

Bosch GSR 12V-15 gridfinity module

I printed in PLA with a 0.6mm nozzle. 5% gyroid infill and 2 perimeters are absolutely fine, just make sure your bed is properly cleaned and leveled, add mouse ears in prusaslicer in case of warping issues.

12V DC motor with gearbox - DC12V66RPM

Just a model to use in other models for reference. Uploading Fusion 360 and STL file so you can import it on your design to use for reference. I also added a test plate to print and test on your DC motor to see if it matches the…

DeWalt or Harbor Freight Hercules Battery Powered Light (12V to 24V LED Light Bulb)

First, the original I modified is a very beautiful structure. Please check it out. I've bought battery backup bulbs before and when the power went out, they were not very bright. I made this for any power outage and with several batteries…

Bosch 12v drill mount

Prints without supports. You should be fine with any size nozzle and layer height. You shouldn't need any infill, but extra vertical perimeters will add strength. I added angled screw holes to the top so you can easily drill into the…

Skadis – Bosch professional 12V battery holder (T-nuts system)

A Bosch Professional 12V battery holder for the IKEA Skadis board, designed to be used with the T-nuts system. Remixed from this model . – It requires: Two M2.5 T-nuts (grab it here ) Two M2.5×16mm screws The model has a front 5mm hole…

Bosch 10.8v/12v battery holder

Bosch 10.8v/12v battery holder

Bosch GKS 12V holder

Holes for screws are 3mm in diameter. Print Settings Rafts: No Supports: No Resolution: 0,3 Infill: 10 Category: Tool Holders & Boxes

Parkside Cordless jigsaw 12V wall mount

I have printed this mount with PLA with 0.2 lines. There are 3 holes to screw it to a wall or wood board.

Bosch GKF 12V-8 Fräszirkel - router circle

Bosch GKF 12V-8 Fräszirkel in der Länge (Radius) verstellbar. Ihr wollt große schöne Kreise fräsen? Keine Lust auf Stichsäge? Kreise bis knapp 2m Durchmesser sollten kein Problem sein. Die kleine Platte kann über drei (oder sogar mehr)…

Gridfinity storage for Bosch GWS 12V

A 5x3 gridfinity storage for Bosch GWS 12V.

Bosch FlexiClick FC Holder 12V for Ikea Skadis, GSR 12V-15 FC, GSR 12V-35 FC

This is a holder for Bosch 12V FlexiClick Attachments (GFA) for IKEA SKÅDIS pegboards . It's compatible with attachments for Bosch GSR 12V-15 FC and GSR 12V-35 FC. It uses Skadis T-Nuts for secure, rattle-free attachment to the pegboard.…

Type-C USB PD65W DC8-32V 3.25A 65W DC 5.5X2.1

https://www.aliexpress.com/item/1005005986842547.html

Parkside 12v 5 Ah Battery

UPDATE: Added a new and improved version that fits the tools way better and has better tolerances. This is 12v Parkside Battery designed for 21700 Lithium cells. you can therefore achieve capacities exceeding the Parkside Performance 12v…

Festool Systainer Bosch 12V Akkuschrauber Halter - Bosch 12V cordless screwdriver holder

Allgemeines Ein Halter für die Bosch GSR / GSB 12V Serie. Der Halter wird einfach in das vorhandene Fach Vorne oder seitlich am Systainer eingeschoben. Druckeinstellungen Drucker: Creality Ender3-S1 Schichthöhe: 0,20mm Infill: 15-20%…

Honeycomb Metabo Akku 12V Mount

Its remix of a wall mount. I use it for my Metabo PowerMaxx BS 12 Akkus. According to the Lawny (Guy which kindly designed it in triple format), it can be used as well on Milwaukee and Bosch. I used 2x M4 inserts from honeycomb storage…

Dewalt 12V & 20V Impact Driver triple bit holder

There are 2 files here, one for the 12V tool and one for the 20V tool. Both hold 3 hex bits. Printed on Prusa MK3 with PLA. No supports needed.

Bosch Professional GAS 12V filter cover

The unfathomable ways of Bosch… The ‘professional’ version of this small vacuum doesn't come with a pre-filter; where the cheaper green version is supplied with one (and with a lot of accessories too…). It is quite annoying to clean the…

Dewalt Battery 12v/20v Charger (DCB107) Pegboard Mount

Simple mount to hang the charger off a pegboard. Threads are M5 (with a bit of extra tolerance added) but have provided a screw model as well. That way you can use your own screws, or print them separately and play with the depth. I did…

Bosch 28mm (e.g. GKS GST GEX 12V) osVAC vacuum connector

This osVAC adapter fits the Bosch 28mm dust extractor connection. Tested on my 12V circular saw and on the multi cutter (Stichsäge) and GEX random orbital sander. There are two versions of the adapter, a larger one where the osVAC…

Support Batterie Parkside X12V Team

Support Batterie Parkside X12V Team Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,28 Infill: 40 Filament: Geeetech PLA Green Notes: Support Batterie Parkside X12V Team Category: Tool Holders…

Case for QC3.0 QC2.0 USB DC-DC Buck Converter, Charging Step Down Module 6-32v

Bought this 2 port DC-to-USB buck converter, and needed a case for it. Here's the item: https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099513216091 It's pretty straightforward, print both sides flat as in the STL. My DC plug…

PWM module case 5 to 12v 10amp HW-070

very simple case for the HW-070 PWM module. pretty much it.

Type-C USB PD65W DC8-32V 3.25A 65W bare wire version

simple box for aliexpress module QC4.0 QC3.0 Type-C USB PD65W standard bare wire version