Counting matching models…
Measurements are taken from an Sworkz S12-2C holder. Will update if it doesn't fit. Needs elastic bands to hold the battery down. There is a little bit of space around the lipo I tested with to allow for size variation, can be filled in…
Technical Description / Technický popis English Version ESC Protective Enclosure for Arrma Fury Mega 2WD (2016) This is a custom-designed ESC protective box for the 1:10 Arrma Fury Mega 2WD Short Course Truck . It is designed to mount…
update 6/1/2026 - the more rigid ab mounts seemed to have resolved the x beam racking, however... unfortunately when i had first caded this up, i made some of the holes on the o.g motor and front mounts a little oversized. initially this…
I designed these mud guards for a Traxxas Slash 2wd High center of gravity chassis to keep the dirt out of the chassis. It uses the holes from the nerf bars so you will need 4 screws that are a bit longer to replace the ones from the nerf…
porta lipo per associated b6.4 2023 modificato per lipo 2s standard
SandPiper 1:8 Scale Baja race buggy - 2WD Rear Engine __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on…
With intention to keep springs, wheels, shock absorber unloaded if car is not in use, I designed my own stand. Tested with Slash 1:10 2WD and 4WD, just check how far shall be mounted on place. Tip - you can lay aside your model even above…
Bumper for Robot Car Kit 2WD. Houses two ultrasonic and two line sensors. Fastened with M3 screws.
I share and will share 3d designs of some broken parts of Turnigy 1/10 Brushless 2WD Desert Racing Buggy that I bought on 2012 from HobbyKing. Part Numbers: 33345
The Voron 2.4 2WD Gantry introduces a groundbreaking design that sets it apart from other 2WD systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other systems, the mammoth-3D…
I printed this out of PETG the proto type was done out of PLA but cracked easily. All infill was done with 40% gyroid. I used 3 supports with long screws that run the full length. When using these on the plow it self you will have to…
I really liked how this wing looked. I printed their mount but either it doesn't work on the 2016(ish) Rustler VXL, it required cutting the body, or the metal shock tower I have is different. I made a new mount that is much longer. There…
Some 1/28 scale cars use rims with an axel with a 3.5mm x 2mm peg that goes through the rim. You cannot use 2wd rims with a bearing for these cars. I'm using this for my RTRC RTB AWD car, but the axels are the same dimensions as the…
A set of printed components to build a 2WD Robot that is controlled and managed by a Raspberry Pi Zero and a L298N motor controller that uses a custom PCB (flexbot) to simplify the wiring/interconnect. This (quite early development c.…
The factory hub carriers have a design flaw where they don't have enough material to screw into, so they strip out easily. I printed these while waiting for new ones to arrive in the mail and they held up fine for a couple days, but I…
I lost my original so designed one by myself. Best in PETG or maybe TPU 98A.
Remixed right/main steering bellcrank to fit left side (as I broke that and not the other lol) This replaced the left bellcrank part and uses the bushings from the original (nylon?) piece.
A hub for motors that can be mounted on a 2020 gantry. Only works with JST couplers. This allows for easy replacement of motors when necessary and keeps things tidy.
Replaces the small cup on the 2wd models where the 4wd drive switch goes.
Improved 12mm Hex Wheel Hubs for 5mm axles. Work on Traxxas 2WD and 4WD vehicles. 12mm hex in various widths from 5mm to 12mm.…
This is another wedge and strap for a 3S LiPo battery like this one here , but this one is for batteries that are too long for the tray, not too thick like the previous one I made. I thought I had all the dimensions correct, but the…
** UPDATE ** I modified the battery strap slot so it can be turned up side down and used to hold batteries that fit in the compartment like they are supposed to so you don't need to carry your flat strap if you don't want to. Also, if…
SONOFF SNZB-02WD IP65 Zigbee LCD Smart Temperature Humidity Sensor holder.
This is a reupload of a full-size dummy model of the SONOFF SNZB-02WD Smart Temperature and Humidity Sensor. Here is the description provided from the original source: This is a 1:1 scale replica model of the SONOFF SNZB-02WD smart…
This is a remix of the SONOFF SNZB-02WD Temperature Sensor Desktop Stand posted by SONOFF on MakerWorld. This stand is designed to hold the SONOFF SNZB-02WD Smart Temperature and Humidity Sensor at an optimal viewing angle when placed on…
Measurements are taken from an Sworkz S12-2C holder. Will update if it doesn't fit. Needs elastic bands to hold the battery down. There is a little bit of space around the lipo I tested with to allow for size variation, can be filled in…
Tire Casting Tutorial/Full Process: Print Settings Material: PLA Infill: 30% Top/Side Walls: 3 minimum Supports Required Resin Requirements Suggested Resin Batch: 50g + 0.6g Carbon Black Suggested Resin: VytaFlex 20 Carbon Black:…
Technical Description / Technický popis English Version ESC Protective Enclosure for Arrma Fury Mega 2WD (2016) This is a custom-designed ESC protective box for the 1:10 Arrma Fury Mega 2WD Short Course Truck . It is designed to mount…
Sidewall Gluing Fixture: Modelled after Schumacher Splinter front tires, others like Fuzzbites should work. Instructions: Apply glue to fixture recess. Put tire face down in fixture. Rotate tire, do not let it sit and dry, spin it around…
update 6/1/2026 - the more rigid ab mounts seemed to have resolved the x beam racking, however... unfortunately when i had first caded this up, i made some of the holes on the o.g motor and front mounts a little oversized. initially this…
If you break the rear wing spoiler on your Rustler 2WD, you can't just purchase a replacement for the rear wing spoiler, it only comes with an entire body. I printed mine with 0.2mm layer height in PETG using the defaults. It prints flat,…
Virtue Macro Pack for 2WD Virtu ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward Feel free…
This is a case to mount the new SONOFF IP65 Temperature Sensor. I just used double sided tape to stick it just outside my window but i included holes for countersunk 4mm screws. I printed it at an angle standing on one edge but i suppose…
Files to support the conversion of an Arrma 3S V3 to rear-wheel drive.
Here is my (mostly) 3D printed RC buggy I called it the Thrush after the small and nimble ground bird, but people mostly associate that name with the disease. It handles very well, and even tracks straight at higher speeds (check out the…
2.2 Buggy Wheels. 12mm Hex. Front wheel is 28mm wide. Rear Wheel is 41mm wide. 2.2 2wd buggy tire from JConcepts and Proline fit. Category: 3D Printing
Hi guys I hope you like my own developed two-wheeled case. There are no drillings included because everyone should decide for himself where the cables are led through. All other modules (e.g. electronic parts) can also be positioned by…
https://pihrt.com/elektronika/403-podvozek-2wd-a-jeho-sestaveni?showall=1 Po zničení prvního plexiskla jsem se rozhodl původní podvozky zahodit a udělat svoje pomocí 3D tisku tak, aby šlo vše namontovat bez vrtačky (sloupků a dalších…
Front A-Arms for Vintage Losi XXX Buggy. These are not an exact copy of the originals, I tried to keep the same dimensions and geometry as the originals but they are beefier for a better/stronger 3d printed part. I have printed them, and…
Traxxas Slash 2WD Electronics Mounting Plate. This is a simple flat ESC Mount that fits in the stock ESC location on the stock Traxxas Slash 2WD Chassis and the LCG Chassis. It might fit other models that use the XL-5 ESC because that's…
I needed extended body mounts for a monster slash build and didnt want to buy them. Printed in PETG, we will see how well they hold up but its cheap to print spares uses m2.6 x 12mm wood screws to attach the posts
The project of a programmable robot controlled by a dedicated application that allows it to be programmed in a visual way. This robot is low cost and not very complicated in terms of construction. For its control and programming, we can…
These wings are meant for Traxxas 2WD models only. (NOT the rustler 4x4 or slash 4x4) Pls traxxas lawyers do not take this down again, this is a custom NON-TRAXXAS part.. Front wing installation: The front wing comes in two parts: the…
All of the stands I have found are for the Traxxas Slash 4x4, so I took it upon myself to design a simple stand for my Slash to keep the wheels off the ground when in storage on the shelf. For assembly, you need the following: (8)…
As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function perfect and is easy to install and print. I used M3x16 screws to mount the holder and the shock tower to the body. For…
Created the mount for the TrackStar 80A waterproof ESC 1/10 scale. Fits perfect and you can use the standard screw holes of the chassis. Sets with this ESC:…
Custom Front Wing and Rear Wing for Traxxas 2WD ONLY vehicles Provides adjustable downforce for speedruns! This is a pair of front and rear wings that have been designed to give adjustable amounts of downforce while producing very little…
Le robot 2wd étant fini est fonctionnel, il fallait le rendre encore plus fun et attrayant. Certes le miens recevra encore un peu de couleurs (peinture). Mais pour le moment il est en PLA rouge. N'oubliez pas d'imprimer avec des supports.
I designed these mud guards for a Traxxas Slash 2wd High center of gravity chassis to keep the dirt out of the chassis. It uses the holes from the nerf bars so you will need 4 screws that are a bit longer to replace the ones from the nerf…
This is a caster block for ECX 2WD RC cars. Fits: Torment 2WD, Ruckus 2WD, Amp MT 2WD, Amp 2WD, Crush 2WD, Amp 2WD, Circut 2WD, and Brutus 2WD. Make sure to follow us so you get notified when we upload a new model! and Don't forget to…
this model is ment to hold your titan 550 12t rc motor while you break it in or are cleaning it
This is the piece of the steering assembly that attaches to the servo on a 2WD Rustler. Compatibility: Traxxas Bandit Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd
Two sets of wheels for the Tamiya Blitzer Beetle, but should also fit Stadium Blitzer and Stadium Thunder and mostly likely other 2WD Tamiya models which have ball-bearing front wheels rather than the 12mm hex found on most aftermarket…
This is a fully printable wheelie bar that fits RPM and Stock bumper mounts for Traxxas 1/10 scale 2wd Cars and Trucks including the Bandit, Rustler, Stampede and the Slash. I have printed it in PETG at 0.15 and 0.20 layer height at 6…
There are cheap RC Short Course Truck wheels on Amazon that come with different hex and offset adapters but are inconveniently missing the “0 offset” 12mm hex inserts necessary for the wheels to fit under a Traxxas Slash 4x4 body. I…
Use 4010 or 4020/4028 (recommend) I think that's other 4010 on my 2wd motor it cooling good but not the best. Update ( 21/12/2023) Increase thickness Update ( 26/12/2023) Use x2 4020 fan with LDO42STH60 on center motor not cooling. yes…
A set of printed components to build a 2WD Robot that is controlled and managed by a ESP8266 microcontroller, packaged as a NodeMCU v1.0 module, and connected to a L293D ESP-12E motor drive module to control two geared drive motors. The…
I mucked around with a few different approaches for running my 2WD Traxxas Slash in snow, but was never really happy with performance. I finally decided to order a set of ribbed tires ( like these ), but they were backordered. While…
A bolt-on dual axle adapter for a 2wd traxxas slash. No permanent modification necessary. Project is still a WIP but is usable. Will add documentation once I'm 100% finished with the design.
I needed to fit an X-Maxx spur gear to a Rustler 2WD gearbox, so I made this simple adapter. Use M3 x 7mm screws. Stock pads will fit, but metal pads are recommended to dissipate heat better. I printed in bridge nylon, 20% infill, 2…
PLEASE NOTE: YOU MUST HAVE THE RPM GEARBOX IN ORDER FOR THIS TO WORK, THE METAL MOUNT AND A-ARM ATTACHMENTS ARE NEEDED FROM IT I needed a much bigger motor mount for my Rustler 2WD, so I remodeled a RPM gearbox without the cover…
I created these 0-degree A-Arms to reduce the terrible oversteer caused by the stock 30-degree bulkhead on the Traxxas Rustler 2WD, with speedruns in mind. You will need: Adjustable steering and camber links (VXL models should have this…
A set of printed components to build 2WD or 4WD robots that can be controlled and managed by any of the Raspberry Pi single board computers (SBCs), a Raspberry Pi Pico microcontroller or an ESP32 microcontroller - where the use of mecanum…
This compresses the sidewalls of your 2wd buggy tire to glue them to the wheel. This is meant to stiffen and shorten the sidewalls. It's primarily used is 2wd buggy offroad carpet racing. The file only contains one half of the device, but…
porta lipo per associated b6.4 2023 modificato per lipo 2s standard
Traxxas Slash 2wd Dual spare tire holder. You will have to cut your body to make space for the wheels. The Slash spare tire holder bracket replaces the TRX5836 bracket. Model made in SolidWorks.
1/8 scale Radio Control Off Road 2WD Front tire. Design to be printed in TPU In Cura set the outer wall 4 or 5, infill 10% and infill pattern to concentric. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes…
Traxxas Slash 2wd Mud flaps. I printed the flaps in tpu and the brackets in pla+. You will need 4 16mm m3 screws and 4 8mm m3 screws. the 16mm screws will replace the original screws that are holding on the rear bumper. Designed in…
Go big or go home - and print this. You're not happy with the size of the XRP? You need more space for sensors? Or just want to make it a really cool off-road RC? Or even use it as 4x4? Connect 2 XRP Frames. Also have a look at my other…
SandPiper 1:8 Scale Baja race buggy - 2WD Rear Engine __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on…
Based off the mini4wd toys of the 90s, this project was created as an entry level design and electrical project for primary school children. This 2WD car will require no soldering. A new cover can be designed, but i've included my own for…
0.2mm layer only 8min print Preferably pets
Renault Duster 2G 2021+ 2WD USB charger in the all wheel drive switch plug On the 2WD version, instead of the all-wheel drive switch, a plug is installed, which has no practical use. Instead of a small pocket, a USB charger is installed…
A mount to fit onto the 'standard' 2WD Chassis Kit seen on Amazon, AliExpress, etc. to be able to mount 2 - 4 Infrared FC 51 sensors. Uses M3 screws to mount to the chassis and the infrared modules Category: Robotics
