27 models
I printed it with the face touching the motor on the print bed and it broke after just a few minutes. I was also using PLA so it was bound to fail… This should work with any motor that uses M3 bolts mounted on a 25mm circle. Print with as…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Fits 2.5" HDDs and SSDs with a maximum height of 15mm. Included is a version that requires (countersunk) screws and a screw-less one that clips into…
This is a reference model of a GoolRC BL3650-3500kv 540 Brushless Motor. Hopefully this should save other folk some time with their projects. You can view/download the Fusion 360 project here. https://a360.co/2XXPLjB Category: R/C Vehicles
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Dust Collector upgrade for Rigid Table Saw (model #TS3650) The original dust collector port attachment has only a 2.5" port for a…
Caddy to slot in 2.5" SATA drives into Lenovo x3650 m5 (MT8871) rack server. Toolless/no screws. Has a little retention nose. Print with 2 walls, 6 layers top/bottom. No supports/brim needed. There are 2 little built in brims to be…
Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Should fit any standard 2.5" HDD or SSD. Screwless model only, compatible drives will slot right into place and grip is very good provided your…
A stand for the Philips OneBlade + Philips NT3650/16 S and its standard accessories.
Every time I needed some small screws, JST connectors or any other little fiddly thing for my printers they came in those mini plastic bins with dividers. They never work super well at keeping things where they should be as well as just…
I made this set of organizer trays for a 60pc Pittsburgh Tap and Die set from Harbor Freight, whose shitty blown plastic case takes up entirely too much real estate in a drawer. This makes the entire set a tight fit into the old-style…
This is a replacement handle for a Kenmore microwave. The part number is 3650W1A075H but it's been discontinued. I've included the .stl file for the handle and also a base to which the handle can be attached for sanding painting. The base…
Adapted RailHolder and Slide for Rigid TS3650 10" table saw with miter fence. The original model I found and printed had the wrong channel size, so I had to create this one to match the channel on my fence. Use two of the 6mm knobs for…
I designed this slide to fit my Rigid TS3650 table saw to use the featherbaord and printed it in PETG (PLA would work well). I made it for the 6mm version of the featherboard and used a 50mm bolt with the knobs in the original build and…
Leider konnte ich aufgrund meiner knappen Platzverhältnisse im Serverrack keine übersthenden SSD Einschübe verbauen und mußte diese nun kürzen. Funkionieren mit der Kante sehr gut beim Herausziehen
brushless motor 3650 mount / support Category: R/C Vehicles
Had one with the same problem. Found the same problem with the file. Slicer said nope. Found a missing face and an internal extra shell. Fixed those, made sure face normals were all good and it not only slices nice now but it's 1/6 the…
I make this motor mount bracket for belt mod to run with 540/550 brushed motor. It helps plastic withstand high heat longer. Enable muanual support under L shape Print with PC or Nylon You'll need 40x40mm metal bracket Specifications:…
Removed horizontal piece, not required for strength. This allows you to arrange the caddies on the bed to print 3-4 at a time.
Stackable tray to organize Plano 3650 tackle box. Each tray holds 10 one ounce weights. Stack two trays and the lid will keep things from spilling around.
Clips on the bottom allow fence to slide. Printed on side for strength. Designed in Onshape, Public space.
A table ought to have ~400 CFM of dust collection. The Ridgid Table Saw TS-3650 comes with a shop-vac sized dust port, and while that helps, a shop vac is lucky to pull even half that air flow. This replacement port allows the full flow…
Assembly requirements: In order to make it, you'll need: - Microsoldering abilities (the job is quite difficult for a beginner, you'll be soldering a SOT package) - A XFT-BT/XY-BT board attained from AliExpress or other online retailers.…
The carriage for the PrimeFilm 3650u, and possibly the 1800 and 3600, are held to the CCD carriage with a metal pin, and are prone to cracking where the pin passes through the carriage. Needs supports to print. The example shown was…
All the parts are compatible with the original model. The only alteration to the side segment is the addition of mounting holes for a 3650 brushless motor. Two of the original mounting holes get reused, the other two are preserved - so…
The carriage for the PrimeFilm 3650u, and possibly the 1800 and 3600, are held to the CCD carriage with a metal pin, and are prone to cracking where the pin passes through the carriage. Needs supports to print. The example shown was…
A table ought to have ~400 CFM of dust collection. The Ridgid Table Saw TS-3650 comes with a shop-vac sized dust port, and while that helps, a shop vac is lucky to pull even half that air flow. This replacement port allows the full flow…
This is a replacement part for number TH100067, table saw belt guard. This is an obsolete part, in itself and as a cover set. Instead of printing the swivel mounting tabs pins, I used two 5mm screws through threaded holes (no need to…
