Counting matching models…
I created a version of the box lid that's two pieces instead of one. I also added the BTT Manta logo on the 1st piece and added a mounting point for a 4010 fan on the 2nd piece. I also removed the vent holes on the front of the case, the…
Update 6/9/2024: Changed to a single piece lid. Edited rearwards 4010 fan to be positioned better above the stepper drivers Pushed section that sits on the y axis extrusion further back to give more clearance for belt tensioners Pushed…
A mounting plate for the BIGTREETECH Manta E3EZ V1.0 controlboard to attach it to a DIN rail. This mounting plate is designed around the DIN clip ( pcb_din_clip_x3.stl ) used in Voron electronics bays like in the Voron 2.4r2. To use this…
When upgrading the main controller board to a Bigtreetech Manta e3eZ (or other Manta board) with a CB1 computer a new touchscreen is also required, as the stock Ender 7 screen is not compatible. This screen surround is for the BTT HDMI5…
Wanted a side mounted case for the E3EZ with enough free space for cable management. Added the logo from here: https://www.printables.com/de/model/500230-bigtreetech-manta-logo Printed in PETG with 4 walls and 15% infill. For mcu fan a…
This adapter plate mounts onto the factory standoffs using countersunk m3 screws (about 6mm in length). Then the Manta board can be mounted on the adapter plate standoffs using M3x4mm screws. Since the location of the USB and SD card…
Modified mount for the switchwire to fit the Manta E3EZ board
Needed an Eletronics box for my E3EZ, so I made one loosely based on a similar box by Ishampadron, over on https://www.thingiverse.com/thing:6052240. The box has support for a single 4010 fan that sits above the first 3 stepper drivers,…
board mount for Manta E3EZ. Please note that none of the ports stick out of the existing openings, but who cares? It's running Klipper via wifi anyway.
Ein Remix meines Cases für einen 40er Lüfter. Würde hier den Noctua 40x20 empfehlen Alles andere ist gleich ;) Es werden kurze und normale Einschmelzmuttern M 3 benötigt sowie Nutsteine + Schrauben um es am Profil zu befestigen. 6xM3 Kurz…
Mounts 2 4010 fans above the stepper drivers HW required: 4010 fans x2 M3 30mm x3 M3 10mm x6 You can also use thicker fans if you need to, but regular 4010s work well enough for me. Also not necessary to mount them into all the holes, Im…
Now compatible with the SKR3 (non EZ version) and Prusa MK3 frame. If you like my design and want to use it on different frame, just contact me and provide the hole spacing, I will make sure to update the design for you.…
Ich hab hier ein eigenes Case für das E3EZ Mainboard entworfen und enige Ideen aus dem Ender Design übernommen. Es werden kurze und normale Einschmelzmuttern M 3 benötigt sowie Nutsteine + Schrauben um es am Profil zu befestigen. 6xM3…
Update 24 JUN: idk what was wrong with me when I uploaded this, but discription has been fixed for actual model. ADHD had me distracted lol My take on a SKR 3 EZ mounting plate for an Ender 5 Plus. ***PLEASE READ NOTES AT THE BOTTOM**…
Here's a model to mount your BTT Manta E3EZ V1.0 MCU to a DIN rail inside the Ender 3 NG v1.2! Designed to clear the 24V power supply, and leaves room for the USB and RJ45 port.
Verschiedene Blenedn für die Alu-Profile vom Vyper. 1 x Eine Bleande Clean 1x Eine Blende mit E3EZ + dem Schriftzug 1x Eine Blende mit dem MANTA Rochen!
This is a modified electronics books to be able to Mount the Manta E3 EZ control board.
Anycubic Vyper / Bigtreetech E3EZ Case…
English (deepl translat) I needed a mount to attach the board to the printer. The holes are 15mm apart in the middle. I also used M3 nuts with a tolerance of 0.1mm. I have uploaded the step for editing. Deutsch Ich brauchte einen Mount um…
Mounts 3 4010 fans, 2 above the stepper drivers, 1 for the CB1 HW required: 4010 fans x3 M3 35mm x4 (for mounting the bracket) M3 10mm x6 (for mounting the fans) M3 Nuts x6 (for mounting the fans) I used Winsinn 40mm 24v 8500RPM Fans (…
A mount to put in a BTT Manta, with fitting fan mount and one mosfet mount. I decided to let the extruder run directly from the board and just use one of my existing mosfets for the bed. Unfortunately I just realised that I missed taking…
BTT E3EZ NG Mount. This Mount is for the Ender NG of RH3D. you need 4 M3 Short heat inserts. Link of the projekt: https://www.printables.com/de/model/469280-ender-3-ng-corexy-beta
MANTA E3EZ DIN RAIL MOUNT AND 2 FAN MOUNTS . MY EZ2209 DRIVERS HEATSINKS HAVE HORIZONTAL FINS HENCE THE DESIGN. IF SOMEONE HAS VERTICAL FINS SEND ME A DM MAYBE I CAN DO SOMETHING. These are some of the parts : 4 M3 Brass Heated Inserts 4…
****UPDATE*** Someone figured out how to flash the original MOBO and THR so this isnt needed if you dont want to switch to BTT ecosystem. I have completely gutted all of Kingroons' control boards in my KLP1 230, and replaced them with BTT…
This is based on AlanB's design to mount a Pi and a Pico SKR. I wanted to use a 120V heater for the print bed, which required an SSR. I also wanted to switch the Pico with a Manta E3EZ+CB1 that I had sitting around. All the screw holes…
second 40x10 fan add on. second file has holes to hopefully allow more air flow to cool the board.
I edited the all_in_one_ender_3 case -_right case -_mks_gen_l_or_skr13 to also fit the SKR 3 EZ by moving one screw hole out and carving out the space for the underboard. I left the original hole in place, so it will still fit any board…
I've created an adapter for the BTT Manta E3EZ board, designed specifically for my Elegoo Neptune 2S printer. The adapter was made using OpenSCAD and is easily customizable for other printers or boards by modifying the constants defined…
This is a super rigid adapter for using the Manta E3EZ control board in the FLSun Super Racer. You will have to modify the side of FLSun Super Racer Electronics Case to allow access for the USB, HDMI, SD Card Slots. I used a Dremel and…
This is a custom remix designed to mount an E3EZ board alongside an EBB36 Gen2 USB converter in a Voron V0. The goal was to create a compact, clean solution that improves wire management while keeping both boards easily accessible for…
Customized back panel to a a BTT SKR3EZ and LDO LCP300-24D5 PSU on the back of Rolohaun's Rook MK2 DIY 3d printer. The original panel is designed to have mounting brackets hot glued on but after making brackets for these devices I was…
A remix that allows for short m3 heatset inserts to be located on the back to avoid use of 3D printed threads.
I am building a needllessly fast Enderwire and the printer was shaking a bit too much with the original mount, so I decided to make a stronger one. I tried following the design language of other components and making if fit in with the…
A simple remix of @hl1010's stepper driver fan mount but slightly taller to clear my BTT EZ2209 drivers.
MANTA E3EZ DIN RAIL MOUNT AND 2 FAN MOUNTS . MY EZ2209 DRIVERS HEATSINKS HAVE HORIZONTAL FINS HENCE THE DESIGN. IF SOMEONE HAS VERTICAL FINS SEND ME A DM MAYBE I CAN DO SOMETHING. These are some of the parts : 4 M3 Brass Heated Inserts 4…
This is a custom remix designed to mount an E3EZ board alongside an EBB36 Gen2 USB converter in a Voron V0. The goal was to create a compact, clean solution that improves wire management while keeping both boards easily accessible for…
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
Mount Manta E3EZ for Creality Ender 7 and BondTech LGX Lite V2 Upgrade voor de Creality Ender 7, Mosquito hotend
Extensively remixed version of the BTT SKR 1.4 Turbo Enclosure for CR-10S Standalone Mod" by mmoraes80, that I have created for use on my own design. I have deleted the aviation connectors, revised the cooling slots, added a 50mm fan and…
follow voron specs prints easily
BigTreeTech has provided a Manta E3EZ enclosure for Ender 3 V2. However, this is like the original enclosure, in which the motherboard has to be mounted on the top of the enclosure, and we have to flip the printer upside down to access…
See Differences. I recommend printing the 60mm redesign (and top) thats the one actual printed in pictures. I will add it mounted once my fan comes in. Sorry still need to tune out some stringing from a new nozzle I have on printer.
Designed for the original Ender3. Will NOT work with a 40x40 Y rail. Designed to allow access from the front to the usb ports and memory cards. The re is an access port on the side for the board sd card. 40x40 Fan can be mounted on the…
