361 models
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…
Hello, I've designed and made this bearing. It works i pretty good:) I've made various designs but this one works the best for me now. I use 4 of these on my spoolholder for a smoother feeding to my extruder. **Fixed the issue that the…
Somehow my factory tension housing cracked and I wanted to just print a replacement vs buy something GalvanicGlaze on Thingiverse posted a basic external shell which I modified to have the appropriate internal components for the…
Please Like and Download my design so I have a chance to get Prusameter bonus, thanks ! A small and easy to print clip, to hold the Bowden tube and the cables together. Fits Ender 3, 3Pro, 3v2, CR-10 Voxelab Aquila, and in fact any…
Ender 3 or similar belt tension system. You can use Mellow pulley or cheap chinese pulleys (use spacers accordingly). Screw in M4 screw in “BELT_TENSIONER_INSIDE” part, length as needed. For belt tension use my belt tension knob from:…
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
After the bed calibration with sheet of paper I recommend you print a first layer calibration test for better ressults in your 3D prints. Printer Ender 3V2 Material: PLA
Update 2024-01-17 - Added the STEP file. Sorry for the delay on this, kept forgetting. I don't have a lot of time to make edits, so feel free to remix - Just make sure you credit the original. Happy tinkering! Update 2023-02-18 - Added…
After I installed a BL touch I realized that I could use the z end stop switch as a filament runout sensor. It was basically a free upgrade and it's nice to not have to worry about running out of filament when you're getting to the end of…
Screen Knob for the Ender 3v2 and others using the same OEM knob. Knurled style matching my other Ender 3v2 Knobs linked below... ❤ Get your Prusameters… Post your Makes! ❤ You can find my other matching Ender knobs here: Drawer Knob:…
I found that if you have to remove the end caps for any reason they are easy to break if not careful, so I decided to recreate them in fusion 360 to be an exact fit so they can be printed in any color of your choice and if you so choose…
Extended lower and upper corners to fit Ender 3v2. Printed with PLA Print: 0,2 mm layer height, 0,4 mm nozzle, 40% infill. Supports only on the lower corners on the 90° overhang.
This is a remix from Stefan . He made a nozzle wiper for the original Ender 3, but that one doesn't fit the v2. This one does now. It attaches to the two bolts on the right side of the X-axis and requires no modification to the printer.…
The original version printed beautifully but was ever so slightly too big. After seeing comments of others having to grind or sand down a lot to make it fit, I took the model and in tinkercad and just made the track part 0.25mm slimmer…
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
Solid and cleanly mounted cable chains for all axes of the Ender 3 Does not limit the movement of the any axis! I recommend to use ABS or PETG, especially if you use an enclosure. Cable Clips I use in total 47 cable clips: x axis: 12 (13…
Drawer Knob for the Ender 3v2. Knurled style matching my other Ender 3v2 Knobs linked below. WARNING: This is a delicate knob to replace. If the tabs breaks, try another/stronger filament. Installation: Remove drawer, press tabs inward to…
Remixed the original 5015 fan duct and slimmed the left duct down to make room for the CR Touch Also added a slot for an M3 nut to utilize the rear mounting hole from the original duct Category: 3D Printer Parts
For those of you who like to design new parts for your Ender 3 v2, but don't have a reference model with all the dimensions. There is a handful of other models, however, they all are distributed as .stl/.step files. Even worse, some of…
Remix of new Satasana dual fan duct with Ender 3v2 mounting hole
This is a simple carrying handle that will attach to a 2020 extrusion with 2x M4x12 screws and T-nuts. I use it as a carrying handle for my Ender 3 V2. The CAD document is on Onshape and is public for anyone who wishes to edit the model…
This part needs no screws, it just sits on the top extrusion of the Ender 3V2 frame. It fits one ball bearing with outer diameter 24 mm and inner diameter 8 mm, for example SS-628-ZZ Print it the same orientation it will sit on the frame,…
Small pillar support required at rear only
The “Generic Steel Sheet Holder” from Fluid does not fit for my Ender Buildplate Sheets. So I remix the holders from the scratch. STEP-Files provided. Feel free to remix. My Print-Settings: 0.2mm PLA “Bavaria Filament” Silver Support: No
This is a rough collection of the models that I used in my Ender 3v2 IDEX conversion. Hopefully the ideas are useful to inspire additional builds. It was definitely more fun than serious and most of the parts were chosen simply because…
Designed this for my Ender3v2-Remake , you only need to print one file and can use the bearings and the knob with this model. The original screws can fit, but I suggest new (longer) ones . Alternavely you can modify the included…
This is a remix of Pixel 3D's Stock Ender 3 Printhead and Backplate found here: https://www.printables.com/model/514635-stock-ender-3-v2-stealthburner-with-4020-cooler-fa/ Changes include: Added heat inserts, cable management to printhead…
Pretty straight forward build for keeping your print area cleaner. The amount of small bits of plastic that comes from printing is aggravating. Vslot clovers are nice to keep that area clean, but the whole printer gets dusty and covered…
Hallo zusammen, hier teile ich euch meine Halterung für die Z-Achsen Spindel. Ich habe diese Halterung konstruiert, damit ich kein Wobble mehr in meinen gedruckten Teilen habe. Als Lager habe ich ein 608RS genommen. Welches einen…
I'm really like the original miniSatsana Light, but the design interfere with BLTouch steel-mount from Creality that already attached to my Ender3v2, rather than messing with BLTouch offset, I remix the original design so it can be use…
Really liked the original design for fitment and wanted to use the same 80x25 mm Noctua NF-A8 ULN, which is almost inaudible. However I felt that the side vents weren't as effective as I liked them to be. Therefore i added some vents into…
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
I really liked the 80mm design by CyberwareDK over on thingiverse. An 80 mm fan with good ventilation holes is plenty enough for the PSU and the Noctua NF-A8 ULN is almost inaudible. However the original design had no Fanguard, which I…
Bed leveling/tramming+create mesh .gcode for Ender 3V2 by Teemo3D | PRINT3D GIFTS Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Notes: Bed leveling/tramming+create mesh .gcode for Ender…
Filament guide for Ender 3v2 converted to sprite extruder. Uses the cable support arm below. https://www.thingiverse.com/thing:5403565 Print Settings Resolution: 0.28mm Infill: 15% Rafts : No Supports: No Filament: PLA
This is a remix of the extruder mount for these cable chains while using the Ender 3 filament runout sensor. You will have to replace the screws with M3x20mm.
Update-- added fan guard. use 2 23-25mm m3 screws to secure. Make sure to either drill out or tap the holes in the fan guard, and tap the holes in the fan duct for a proper fit. Remixed version of https://www.thingiverse.com/thing:4647053…
Remixed in Blender. I connected Redbluebear132 's Glados head to Greco1970 's V-slot base. Articulated via soozafone 's Lucky 13 armature pieces. In files, check how long you want the neck and insert pieces in the slicer accordingly. Be…
Update 27/4/2023 added klipper config and superslicer config of my printer for you guys <3 This model is a remix model that I edited from the X Carriage Frame of team Voron that use for Voron Switchwire. I love the design of Voron…
NOTICE: This was designed to be the thinest adapter cover that will still allow for a USB connection using adapters. This is not a part for the faint of heart. It does require some effort to get the SD Adapter to line up. Folding ribbon…
Ender 3 V2 front case for BTT TFT35 SPI no support needed, but you do need to tap the aluminum extrusion to accept screws
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
This mount is made for the TP-Link Tapo C100/110 camera in combination with a Creality Ender 3V2 3D-Printer. The mount is screwed with two M5 screws onto the existing y-axis belt tensioner. You will need to swap the original screws, which…
This case may not be compatible with ender3s with shorter pads. My ender3 measures 45 mm from the underside of the Y-carriage extrusion to the table, while this case measures 42 mm. Additional Hardware 4 M3x16 (Cover) 4 M3x6 or M2.5x6 for…
print 2x dryer top the other 2 parts 1x i printed with pla 0.4 nozzle 0.2 layer hight
This was a quick design to align the magnetic bed (235x235) of my ender 3 V2. Holds to the bed screw. Recommendation: print for 2 corners (right front and back) for better alignment.
Deutsch: E3V2 Modell als Cura Röntgen-Buildplate einrichten !!!UPDATE!!! Scheint nicht mit Cura 4.11 zu funktionieren. ich arbeite an einer Lösung! HALLO COMMUNITY ICH WOLLTE EUCH HEUTE MAL ZEIGEN WIE MAN SICH DEN ENDER3 V2 IN CURA…
Could not find one that i like and fit. Cover with and without Voron logo. 08.04 added closed versions
Combined the 2 models to allow direct drive and bl-tpuc, cr-touch, 3d-touch mounting. No nuts and bolts needed.
Este soporte es 2 cm mas pequeño que el que trae la ender 3v2 para poder cambiar, yo lo tube que hacer por que mi ender no cabia en mi repisa.
Scaled down the knife to fit a ender 3 v2's print bed. Category: Other
Riser feet for Ender 3v2 Neo that make the printer sit higher of the ground for more airflow underneath. This part makes use of the OEM rubber feet that come with the printer so no cutting or other permanent modifications have to be made.…
i made dis for my ender 3v2 leave a like if you like it
Case for skr mini e3v2 and raspberry pi 3b
A Satsana with an integrated BLTouch mount that fits unto an Ender3v2. I made this remix because I wanted to have a Satsana duct with an integrated BLTouch mount, but could not find any that had all the holes that are on an Ender3v2…
Z axis mount for Creality Nebula Camera. This will alow you to mount the camera upside down, the part is very minimalistic and flush to the frame. May work on other Ender3 variants. I used this screw to hold the camera in the mount.…
A Beaglecam mount for the Ender3v2 which can be mounted at the front. I have to admit that the Beaglecam is not really suitable to be attached to any printer directly in front, the camera angle just does not fit for it especially for…
This is useful for hotend mounts that moves the hotend forward (like all of my designs for top mounted hotends, and likely many other), which usually lead to lost printable space, this gains 10mm back, for the full 235mm in Y But does…
TINMORRY FILAMENT SPOOL ADAPTER - 31/54 Customised using openSCAD as thingiverse is just plain broken. This is a customised print for a loose fit on a standard ender 3v2 spool holder, but nice and tight in the Tinmorry spool. IMPORTANT…
I fixed problems I had with the Satsana hotend shroud! Part cooling fan sits snug now and has a press-fit cover to catch all the air, no more annoying air gap! air vents point an extra 20° down, no more air blowing on the heater block or…
This is a remix of the satsana mini to add some text and extend the top screw slot to fit my printer. It was originally for ender 3v2. I have it on my ender 3 pro and creasee CS-30 with microswiss and dragonfly bms hotends and it works…
I made this camera bracket to hold my Logitech webcam. Use PLA for printing, 10% infil. You will need 5 M5 20mm screws and 5 bolts. Bracket 03 must be printed twice. 1 . Unscrew the two screws located in the left corner of the printer,…
Stealthburner Mount for Ender3v2, fits a Spider v4 hotend
I added a Z tensioner sync belt to my dual motor Z axis. I designed this to fit the same 20 tooth pulley with an 8mm bore diameter that i used on the Z screws. As with my Ender 3 v2 Neo I couldn't fit the Z screw stabilizers to the…
this work in progress is a mix of https://www.thingiverse.com/thing:4559133 and https://www.thingiverse.com/thing:4545252 as I have the bl-touch original plate installed so I had to adapt the pen holder Print Settings Printer Brand:…
Update 08.01.2022: Please DONT USE WITH CR-TOUCH. If you use this arm with mountet CR-Touch your printhead cant hit the X-Trigger for stopping. Serious damage can cause!!! BL-Touch is no Problem. Update 16.09.2021: I added a long arm wich…
Upgrade for BLuer printer from Two Trees The upgrade includes: - hotend holder - air pipes for cooling the nozzle - holders for 4020 fans - extruder and motor holder infill: cubic - 25% material: PET-G / ABS
Remix from https://www.printables.com/de/model/188898-logitech-c270-camera-holder-for-30x30-aluminium-pr for ender 3v2, vertical part has been extended to rise camera above bed. At the moment, I cannot recommend this model, as the camera…
Version 2 available: Ender 3V2 Damper Feet (Soft Springs) von AaronLK As far as I can remember my engingeering-courses the machine should sit on springs as soft as possible to reduce vebrations from/to the environment. Standing on a IKEA…
Housing for 5' Capacitive Touch Display with DSI Interface. Will fit Ender 3 V2, Pro and clones. https://www.waveshare.com/product/5inch-dsi-lcd.htm https://klipperscreen.readthedocs.io/en/latest/ Other hardware: M3x10 Socket head cap…
This is remix from: https://www.thingiverse.com/thing:5198544 I remix this fit for Ender 3v2 with Orbiter v1.5. I trust nuts more than plastic screw holes lol + M3 10mm x2 + M3 8mm x2 + M3 nut x4 P/S: You can install BL Touch part on…
This should be a pretty standard print, no supports needed. I printed with layer .2mm layer height with 15% infill but since this doesn't really support weight, you can probably go even rougher or lower infill with no problem. The fit is…
Hier teile ich meine LED-Streifen Halterung für den Ender3 v2. Bitte achtet auf die Ausrichtung, ich habe Bilder aus Cura beigefügt. Das Bauteil ist 100mm lang. Für den Ender3 v2 werden 3 Stück benötigt. Alternativ kann die Länge auch in…
As those of us with Ender 3v2 machines will find out, the stock cooling duct will slowly deform and melt causing us to replace it. Many of us have looked for replacements, upgrades and anything else useful to fix this. I have ran other…
BLTouch bracket for the Ender-3v2. Included 1mm packer. Allows for the x-axis endstop. Category: 3D Printing
Ender 3v2 X and Y mounts for adxl345 for Klipper Resonance Tuning This print was inspired by https://www.thingiverse.com/thing:4882714 These are low-profile mounts that clip on the X gantry and the printer bed + surface. They are a…
Just a remix of another handle, added a recessed hole that allows you to attach a camera without clearance issues. ** added the screw that fits in the hole with a flat blade to tighten in the hole.
I couldn't find anyone who has already made this? There's a lot of free space on the extrusion to the sides of the bed, and the Y axis doesn't interfere or collide with Gridfinity items placed on the baseplate, so there is no reason not…
This is a very simple remix of igalopakas design ( https://www.thingiverse.com/thing:4614384 ). The change is that it is updated to allow the Stealthburner with CW1 to be mounted to the Ender 3 v2 (may work with others that use the same…
Distension gadget to print flexible pla, tpu, tpe, ninjaflex for Extrusor Ender 3, Ender 3V2. I made it in shapr3d. You can use a 3d printing screw or a metal M3 screw.
Upgraded my Cr-10s pro with Afterburner, remixed the a microswiss toolhead to suit this hot end. Nozzle position remains the same, has been printing very reliably since the upgrade.
Simple cable bracket (clip) for a Creality Sprite Pro direct drive on Ender 3 V2 to attach it to default bowden extruder bracket. Giving it in 2 versions: one with Ender name on it and clear one. Not sure about other models. Should fit if…
This is a remix (kinda) to adjust the original file to fit a Logitech C615 web cam.
longer version , extended 10 or 13mm i made this a while ago but it lets you use x axis bets for the y axis and enough space to tighten up the belt or use even longer belts you do need to use m5x20 bolts to use this
I remix from this v2 Original is at grabcad: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Big Thanks to Ahmad Sunardi His file is awesome, but look like it doesnt fit very well. So i do this remix with edit some…
###Nozzle Brush v1. I made this with parts floating about the workshop using a pancake stepper motor. There is another version coming with a small servo. Keep a look out for this. Designed for the Ender3v2 but more than likely fits other…
This combines a bed handle with the bed level knob locks. Bed Locks are labeled for easier install... LF = Left Front RF = Right Front LR = Left Rear RR = Right Rear Tested on Ender 3v2 but might work for Ender3/3Pro and possibly CR…
Loved the simple and solid design that Mulilla made, but I found that the left locking tab was very delicate. I replaced the tab with a thicker tab, without the locking knob. The locking function isn't needed anyhow and now the tab is…
A little remix of @ruredi87_241997 's so-called Ugly Ender3v2 Toolhead. In this version, I've made the hole diameters smaller in all the places where there's no M3 nuts being used. They were 3mm, but that leaves nothing to thread into, so…
Easy to print lightbar support for the top bar of the Ender3v2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Filament: Any PLA black Category: 3D Printer Accessories
First layer test for Kobra 3v2 for the entire working field.
changed to a V-slot mount PLA, 15% infill with 3 walls
A non-permanent mount that slides firmly onto the bed carriage of an Ender 3v2 allowing you to do your Input Shaper calibrations and easily remove it after. Will likely work on an Ender 3 and any other bedslinger with a 6mm thick bed.…
This is a custom hotend shroud, designed for the ender 3. It's compatible with a direct drive extruder and bl touch, it also has a mount for an ADXL345. the fan ducts are designed a tiny bit smaller than the stock 4010 blower outlet so…
This is a mount for the screen to be fitted closer to the bed and saving space tome the whole machine smaller, for better space in a ikea lack incloseur. still having room for the sansana cooling. i used the original screws adding some…
Left side mount for the screen
