Counting matching models…
Big thanks to JP3d for his mount of uhp 350w , but i'am looking for PSU for the V-minion good and available and much cheaper than UHP-350-24v. SO i found this power supply for 35€ ( important it is not better than UHP-350-24v by any mean…
Camber heater with derby shield. It is secured by the enclosure panel bolts with no modifications. I installed the a thermal fuse between the PTC heater core and cover. You will need: 1 x PTC 400w heater 1 x 220v fan 2x M3x50 2x M3x40 2x…
This is a case for400w, 15a, CC CV boost converter board using TL494C chip. Features: Completely expose heatsinks for better cooling. Add access to all trimpots, screw terminals (and fuse). Cover all exposed leads on the back of PCB. No…
This 24V design enables you to circulate the air and heat it at the same time. Video on the heater with instructions can be found here: Printed in ABS-GF with supports on the main body. The parts that touch the heater can be printed in a…
Other part files can be found on the original model page: https://www.printables.com/model/256335-atx-benchtop-power-supply-0-30v-remix-fusion-360 The twin USB ports are connected to the 5V standby rail so are always powered Parts list:…
This box is made for DC/DC 400W module. Is uses heat inserts to mount the screws (lid / module itself). The are two versions for the lid - one with fan mount and second without. I used 24V fan since output of my DC/DC is 24V.
Router adaptation for Hilda 400w This is a remix from https://www.thingiverse.com/thing:17105 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 35% Filament: Prusament PC Black Notes:…
I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…
This must be printed in two pieces and glued/taped together. Do NOT recommend printing in PLA, due to warpage during use. Originally, I printed this on a Lulzbot using vase mode in Cura, which worked well.
Stepp Up Converter Stepp Up Converter [https://www.amazon.de/-/en/Aideepen-Converter-Constant-Supply-12V-83V/dp/B0B2111VF6/ref=sr_1_6?crid]
Under desk mount for Lenovo's 400w power brick shipped with the gen 10 Legion Pro 7 series laptops. Printed in PETG Category: Organization
400W Step up buck boost converter case This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build.…
Snap-Fit Case for 400W 15A DC-DC Step-Up Boost Module Custom, screwless snap-fit protective enclosure designed for the popular 400W 15A DC-DC Step-Up / Boost Converter Module (Input: 8.5–50V, Output: 10–60V). Snap-Fit Clips: 4 integrated…
Had to repair my mixer. Unfortunately a dumb pin was broken. BAD DESIGN!! https://www.youtube.com/watch?v=97tgce-4sC8 A.m. link shows you crucial repair steps: -1 how to open the case: three special screws which you need to open with a…
The power supply that came with my Anycubic Mega SE is one of several variations of the Chengliang P400W24V, a 400W 24V power supply. Because I switched to dual-Z, I wanted to relocate it from it's stock location behind the gantry…
I recently bought a "LED Power Supply" from eBay for my LiPo charger, and found the instructions and STL from bastian___ - but unfortunately that cover didn't fit my PSU, so i designed a new one. The PSU has the model number DY01, accepts…
1. 400W power supply for disc grinder. Voltage adjustment up to 20V and current adjustment up to 20A. Converted from a regular power supply. Added terminals, connectors, fan. power supply -…
Fan replacement to a 90mm fan to kill the noise. without inserts. Dimension: 110mm by 195mm ------------------------------------------------------------------- Abdeckung um den nervigen Lüfter zu ersetzten, verwendet wird ein 90mm Lüfter.…
400W Step Up Buck converter PCB model Not designed for printing model for building enclosures of the 400W buck step up converter. Can help support my work by purchase on Amazon : https://link.amazon/B03jFBfar or AliExpress :…
A mount for your 400W light to be secured on pier fences, for fishing squids etc. This is designed for this specific light and 2" x 2" steel fences. 400W LED Work Light When printing, I would recommend to increase perimeter thickness to 4…
Mount for the DUSKTEC 400W 24V LED power supply. Includes: Slot for 2x 60 mm fan for active cooling Integrated cable strain relief Space to neatly fit Wago connectors
Protective end cap covers for this power supply: https://www.amazon.com/CEILEX-Dimmable-Compatible-Potentiometer-Transformer/dp/B0DG6N39RW/ref=sr_1_7 I needed to mount a few of these power supplies in an easily accessible cabinet and I…
60v 6A 400W laboratory power supply with key switch and industrial power supply rd6006 power controller 16mm key switch Industrial power supply 60v 6A 400W electric cable refer to photos for wiring we use the switch to cut off the 230v…
Simple Case for the Gemaudio 2.1 400W Amplifier Assembly requires 12 - M3 (8mm) screws and Heat Set Insert to lock all the parts in place.
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
The “Sunchronizer S2” is a solar module holder. With it “standard” 400W solar modules can automatically track the sun on the elevation axis. The Sunchronizer S2 is the successor of the Sunchronizer S1 . Ultimately, everyone should be able…
The “Sunchronizer D2" Dual Axis Tracker is a solar module holder. With it “standard” 400W solar modules can automatically track the sun on the elevation and azimuth axis. The Sunchronizer D2 is the successor of the Sunchronizer D1 . With…
Under desk mount for Lenovo's 400w power brick shipped with the gen 10 Legion Pro 7 series laptops. Printed in PETG Category: Organization
60v 6A 400W laboratory power supply with key switch and industrial power supply rd6006 power controller 16mm key switch Industrial power supply 60v 6A 400W electric cable refer to photos for wiring we use the switch to cut off the 230v…
Since I started working on the successful balcony power plants (here in Germany), I asked myself how the energy yield of the two to four solar modules could be further improved. The “Sunchronizer S1” is a solar module holder with which…
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
The “Sunchronizer S2” is a solar module holder. With it “standard” 400W solar modules can automatically track the sun on the elevation axis. The Sunchronizer S2 is the successor of the Sunchronizer S1 . Ultimately, everyone should be able…
The “Sunchronizer D2" Dual Axis Tracker is a solar module holder. With it “standard” 400W solar modules can automatically track the sun on the elevation and azimuth axis. The Sunchronizer D2 is the successor of the Sunchronizer D1 . With…
Since I started working on the successful balcony power plants (here in Germany), I asked myself how the energy yield of the two to four solar modules could be further improved. The “Sunchronizer S1” is a solar module holder with which…
