Counting matching models…
IF YOU REMIX THIS, PLEASE LET ME KNOW, legally I can't oblige you to. But I would love to know what you make so I can add a list of remixes to the post! The 40max shells are super popular, but strangely enough lack a large amount of…
This is a simple single-shot pistol that takes 40Max shells. The barrel flips open in a break-motion. The whole thing needs 2 to 4 regular rubberbands for the trigger return and lock retention in hardware. No other hardware required. I…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM #4 3/8in self tap screw qty 10 Any small spring under 5mm OD and 20mm in length x2 Printing Instruction Pretty straightforward. Assemble the grip and barrel…
This allows you to put a Silly Shell Nerf shell on a 40MAX shell base. (Also compatible with 40WAD shell bases.) https://outofdarts.com/products/40max-40wad This should be compatible with any Silly Shells that fit the standard Silly Shell…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Pretty straightforward; shoots from 40 max shells. I don't have any, but I happened to design this thing called the ShockMax 40 shells that go with it pretty well :)…
The AIT + 40MAX Lightning Mag Extender is a 3D-printed add-on designed to increase the capacity of the ten-round magazine included with the AIT + 40MAX Lightning Brushless Flywheel Blaster. Featuring a continued follower channel and…
Spitfire Spring-Powered Nerf Shell is a fully 3D printable upgrade compatible with 40MAX blasters. No gas or rubber bands needed — just print, assemble, and add a common spring for reliable, powerful performance. Easy to print and…
I was looking for solutions to improve the accuracy of my AIT Toys 40MAX Lightning blaster, and found the barrel upgrade by JC Works. But I'm lazy and didn't want to disassemble the blaster to try it. So I threw together a quick design…
Didn't realize there was a demand for this so sorry for the wait! Please be sure to print in bright colors preferably with orange at the end. Cuz remember: " A brightly colored faux can, can save your real can when out in public!" -Joker…
I am in the process of developing an LPA tank blaster, similar to the Nerf Titan. I was designing a room sweeper attachment when I realized this geometry is too crazy to keep to myself until the blaster is done. I quickly added some…
These muzzles are modified for compatibility with this kit: https://www.printables.com/model/1691579-ait-lighting-stock-attachment-point-picatinny-moun They are press fit and should be easily pulled in and out of the blaster but should…
The Lightningale Magazine Bumper is a replacement baseplate for the AIT + 40MAX 16-Round Slim-Angled "Lightningale" Magazines. Meant to be printed in TPU and handbell clapper-style "timbre slots," this part is designed to increase drop…
able to attach and remove silly shells to you 40max/wad. slim enough to insert the 40max into a blaster such as a grenade launcher or the gambit. tested works great
Add 2 more rounds to your lightningale mag! Remove the original base plate , then install this. Remarks: It's not compatible with original lightning mag.
A remix of RedCowl's excellent shroud, that allows for using the 95mm fidlock fitting holsters (Holdster, and others). Setup for a right hand draw, to left hand draw, mirror the files. Updated with Left hand draw files as well. Go to…
Pull pin detonator for a 40max or 40wad. Comes in multiple versions. Easy Printing, logo, picatinny. Recommended to print the firing pin in PETG. Recomend to use metal pull pins. short firing pin paired with a 20mm x 10mm x .8mm is best…
The OOD MOLLE Magazine Holder (Lightning + Lailaps) is a single-magazine carrier for MOLLE-compatible belts, vests and plate carriers. Featuring four POM ball detents, this mag holder grips your magazine securely while reducing wear on…
Rubberband Powered 40MAX Nerf Shell Low Hardware only one about 2h30m print and 3 rubberbands and you have the shell Hardware: just 3 rubberbands from your kitchen or so Print Time: like 2h30m with 0,28mm layer height Sorry for only 3mf…
shell ejecting 40max adaptor
The AIT + 40MAX Magazine Slide-On Base Plate is a simple 3D-printed base plate for AIT + 40MAX short dart magazines. It slides on over the magazine's existing base. FEATURES: • AIT + 40MAX Magazine Slide-On Base Plate • Designed by Luke •…
A simple edit of Misplacedmoose's lightning upgrade kit to allow compatibility with the official magnum kit. Added a slot in the front to accomodate where the knuckle guard sits on the bottom of the magwell. Reccomended min 3 walls,…
These muzzles are modified for compatibility with this kit: https://www.printables.com/model/1691579-ait-lighting-stock-attachment-point-picatinny-moun They are press fit and should be easily pulled in and out of the blaster but should…
First up, thanks to Domochevsky for releasing this blaster AND the step files! Secondly, the parts here use M3 heat set inserts (5mm OD, 3-3.5mm height). Don't use any smaller ones, they will fall out or not be strong enough. On to the…
This is a printable replacement magazine compatible with the AIT 40max Lightning. It uses a drum spring, and can hold 12 darts. For printing and assembly details refer to the un-remixed file. I find the top to be prone to pulling apart so…
This is a printable replacement magazine compatible with the AIT 40max Lightning. It uses a drum spring, and can hold 12 darts. For printing and assembly details refer to the un-remixed file. I find the top to be prone to pulling apart so…
Requires press fitting a 40MAX cartridge into the attachment. Has Picatinny mounts and the ability to attach to another Picatinny rail. Allows the swapping of the cartridges and the front muzzles for different ammo types. Required M3…
I wanted to belt holster the 40MAX Lightning, but the TPU holster 40MAX published is designed around their thigh mount kit. I've enjoyed using the Hek Lok belt clip for other belt clips, so I did a quick remix of the clip to match the…
EXPERIMENTAL PRINT TO ATTEMPT TO IMPROVE THE DART/MAG SENSOR, NOT GUARANTEED TO WORK. I messed around with trying to increase the reliability of the mag detection outdoors. Painted my AIT/40MAX Lightning, added this print, added tint to…
Make your own 40max adapter with this handy dandy .step file.
![Printable Mag for AIT 40max Lightning [OLD]](https://media.printables.com/media/prints/a3282ea4-8d56-4c6b-9485-837d432b1a22/images/12743086_bd71d12d-094f-4eab-872b-45e5ccc63d68_5c5dc3a1-0aa7-457d-afe8-5d46ad79fd78/ltnmag_image_2.jpg)
