P
PrintablesВадим Самураевич
Axial cooler bracket 40x40x10 for 3d printer Ender 3 v3 se
A 40x40x10 axial cooler bracket for the Ender 3 v3 se 3D printer instead of a small axial fan.
- Downloads
- 18
- Likes
- 2
- Rating
- 0
Search results: 40x10
Counting matching models…
P
PrintablesRatasich
USB-C Pocket Breeze (PhoneFan 40x40x10)
A compact, portable cooling solution that transforms your phone into a personal fan. Yes, you can buy something like that for cheap, but why would you. Maybe you have an old 5V hotend fan already lying around for this little project. Just…
- Downloads
- 14
- Likes
- 6
- Rating
- 0
P
PrintablesCarter
Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
- Downloads
- 1,585
- Likes
- 134
- Rating
- 4.92
P
PrintablesCarter
Raspberry Pi 3B+ Case for Noctua 40x10
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
- Downloads
- 1,486
- Likes
- 176
- Rating
- 4.94
P
PrintablesDiAleksi
Candle mold 40x100 with a string lock
This is a candle mold container for 40mm diameter and max 100mm tall candle. Lock the mold container with a ziplock Put the candle string through the bottom lid and tape it to lid's hollow Attach the bottom lid to the bottom of the mold…
- Downloads
- 706
- Likes
- 141
- Rating
- 4.25
P
PrintablesDrevil
Ender 3 S1 Fan Mount & Duct (Stock 40x10 Radial Blower Fan)
Ender 3 S1/Pro/Plus Sprite Fan Duct A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers . This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the…
- Downloads
- 420
- Likes
- 66
- Rating
- 5
P
PrintablesKisolov
Sound moderator 40x100+
Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…
- Downloads
- 408
- Likes
- 46
- Rating
- 0
P
Printablessuit
Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan
Print from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example. Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm
- Downloads
- 375
- Likes
- 50
- Rating
- 4.25
P
PrintablesPolyGone
40x10 Cable Duct for 4040 Aluminium Profile
This is the 40x10 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Due to the minimal height it might be a bit hard to remove once it's clicked into place. Also see my other models for…
- Downloads
- 287
- Likes
- 42
- Rating
- 0
P
Printablesgapx
WX-DC2412 Enclosure - Box - Case - XT60 - IEC320 C14 - Fan 40x40x10mm
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
- Downloads
- 232
- Likes
- 16
- Rating
- 0
P
Printablestlum00
Simple Box - 8000 different Sizes - 40x40x10 mm up to 150x150x150 mm - Wall thickness of 3mm
Customizable Sizes for Every Need My boxes come in a wide range of sizes to suit different needs. They are available from a compact size of 40x40x10 mm to a larger size of 150x150x150 mm. These boxes are provided with increments of 5mm,…
- Downloads
- 223
- Likes
- 15
- Rating
- 5
P
PrintablesRegulus
Raspberry Pi 4 - PoE Texas Hat - 40x10 Noctua Fan Case
I Stretched the case designed by Haz1 to make room for a POE Texas hat. Just a simple remix. It's pretty rough but does exactly whats needed. Thanks for the great work Haz1 find his original thing:…
- Downloads
- 183
- Likes
- 24
- Rating
- 4.5
P
PrintablesBlueShell3D
Nintendo 64 40x10mm Noctua fan mount
For a 5v fan, 3.3v can be soldered to on the underside of the power switch. This fan is designed specifically for Noctua 40x10mm fans as it uses the fan's specific shape to click into place. Uses original screws, no additional hardware…
- Downloads
- 175
- Likes
- 41
- Rating
- 5
P
PrintablesBruncione
Rack Shelf 140x100mm
Rack shelf for DLINK switch 8 port. To be mounted in server. It works printed from PLA but best is ASA (heat resistant). Switch taped with double sided tape on two 5cm strips. I printed 0.2mm PLA with 4 perimeters and infill 5%. Works…
- Downloads
- 157
- Likes
- 14
- Rating
- 0
P
PrintablesCor
Artillery Genius Left side Fan mount for 40x10 Fan
Since I like to see my nozzle and what is happening this seemed like a good solution (Fan is not that loud due to 40x10 size and design) Also it can be used with 40x20. This is a redesign…
- Downloads
- 149
- Likes
- 31
- Rating
- 5
P
Printablestlum00
Simple Box - 8000 different Sizes - 40x40x10 mm up to 150x150x150 mm - Wall thickness of 4mm
Customizable Sizes for Every Need My boxes come in a wide range of sizes to suit different needs. They are available from a compact size of 40x40x10 mm to a larger size of 150x150x150 mm. These boxes are provided with increments of 5mm,…
- Downloads
- 144
- Likes
- 10
- Rating
- 0
P
PrintablesGumbert
Fan Adapter (40x40x10 holder to 30x30x7,5 fan)
This Adapter is to fit a 30 x 30 x 7,5 fan into the Snap in fan holder module of the Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options.
- Downloads
- 120
- Likes
- 17
- Rating
- 4.83
P
PrintablesRegulus
Raspberry Pi 4 Prusa MK3S Case w/ PoE + Noctua 40x10 Fan
This is a Remix of an old Remix. This will screw directly onto the Prusa MK3S frame and its completely out of the way so it doesn't ever interfere with printing. Power your pi with POE and buy a short usb cable to connect to the Prusa.…
- Downloads
- 114
- Likes
- 19
- Rating
- 5
P
PrintablesCarter
SlipCase for Raspberry Pi 4b and Noctua 40x10mm
SlipCase-FanCase is a snap-together Pi4B Case and stand for the 40mm Noctua Fan IOPlane snaps over IO, used as slide/guide for Pi4B and Fan Assy to slide into Base, carefully snap on cap. Noctua 40mm fan fits into Fan frame Fan support…
- Downloads
- 110
- Likes
- 28
- Rating
- 5
P
Printablessquirrelf3d
Case for BTT Pi 2 or raspberry pi 3b + PiTFT50 v2.x + 40x10mm 5v fan
updated Jan13: rev 3 should be safe to print and test. I printed rev 2 for the raspberry pi 3 and tft50 v2.0, and only one tiny fix was needed which is fixed in rev3 updated Jan12: there was a small area that needed shaving also tweaked…
- Downloads
- 97
- Likes
- 24
- Rating
- 5
P
Printablestlum00
Simple Box - 8000 different Sizes - 40x40x10 mm up to 150x150x150 mm - Wall thickness of 5mm
Customizable Sizes for Every Need My boxes come in a wide range of sizes to suit different needs. They are available from a compact size of 40x40x10 mm to a larger size of 150x150x150 mm. These boxes are provided with increments of 5mm,…
- Downloads
- 94
- Likes
- 9
- Rating
- 0
P
PrintablesPCHe
Raspberry PI 3B+ case with space for 40x10 5V fan Noctua NF-A4x10
All Raspberry cases I have found were small, fancy, without possibility to mount a fan. So I have made one. It is not the smallest one or the fanciest case, but it is easy to print and there is possible to mount 40x10 fan (I am using…
- Downloads
- 91
- Likes
- 8
- Rating
- 0
P
PrintablesChya
Resin and Glue Tray - 140x100mm
This tray is specifically designed for mixing resins, and its large size (140x100x5.8 mm) makes it perfect for larger projects. The internal rounded edges help ensure that no resin gets trapped in the corners, making it easy to mix and…
- Downloads
- 86
- Likes
- 10
- Rating
- 0
P
PrintablesHuDSoN
Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan
Had to remix the duct as my heatsink measured 20.75mm tall. Also seemed to be deeper so I had to remove the side so 2 fins could poke through and allow the duct to sit in the correct place.
- Downloads
- 79
- Likes
- 9
- Rating
- 5
P
PrintablesCarter
HexCase DomeTop for RPi 5 and Noctua 40x10mm PWM Fan
Makes Wanted: Seeking information for revision/improvements. I need to hear what is needed to make these cases work better. Thanks! HexCase DomeTop for RPi 5 and Noctua 40x10mm PWM Fan All HexCase RPi 5 Bases fit All Hexcase RPi 5 Tops…
- Downloads
- 71
- Likes
- 9
- Rating
- 0
P
PrintablesDaniel Mueller
Ball Bearing 20x40x10mm using 6mm BBs
This ball bearing is intentionally not designed as print in place because I wanted a higher precision and an actual usable bearing. This version uses 6mm (mine are actually ~5.93mm) BBs for its balls. Those are fairly accurate, are cheap…
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
PrintablesStonecold
Nicklasson's 40x10 fan SW-X1 remix with Waggs BL Touch mount
This is a remix of Joel Nicklasson's extruder cover/fan shroud with Steve Waggs BL Touch mount added. Print instructions Category: 3D Printer Parts Print Settings Printer: Artillery SW-X1 Rafts: Doesn't Matter Supports: Yes Resolution: .2…
- Downloads
- 52
- Likes
- 1
- Rating
- 0
P
PrintablesXR3D
40x10 fan clip-on screen
Clip-on screen fits 40x40x10 (4010) fans, Mk2/Mk3/s/Mk4 etc. Catches hairs allowing you to remove them. Flan clips on and off easily by hand, even while the printer is running. Especially good when printing lots of PETG which create…
- Downloads
- 42
- Likes
- 9
- Rating
- 0
P
PrintablesLittleJoeMuc
Creality CR10 mainboard fan mounting bracket for 40x40x10mm
A bracket to mount a 40x40x10 mm fan instead of the original 50x50 mm. This bracket replaces the original one and fits right in place where this was. You can reuse the two original screws to mount the bracket to the case. The four holes…
- Downloads
- 41
- Likes
- 9
- Rating
- 5
P
PrintablesLingon_
Valve Index 2x(40x10)mm fan mod
Replace the original front plate of the valve index with two fans with adjustable fan speed. Installing this part will void your warranty. Model is based on the official step file provided by valve on github but I modified it quite…
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
PrintablesRegulus
Raspberry Pi Double Headless PoE W/ 40x10mm fans Case
This is a remix of the Haz1 case. It snaps together and allows access to the microSD card for quick swaps. This is designed to run headless, and such i didnt need access to the raspberry pi Ports. This is controlled and powered by 1…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesDaki3D
Trichter für PC Lüfter 40x10 auf USB-Miner GekkoSience
Ein leichter und Platz sparsamer Trichter.
- Downloads
- 30
- Likes
- 0
- Rating
- 0
P
PrintablesSgk Kakaroto
cable_cover fan 40x40x10
model pour voron 2.4 fan 40x40x10 pour ebb2209/2240
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
Printableskeyglitch
Raspberry Pi 4 40x10mm Fan Holder
This is a simple print to hold a fan above the CPU of a Raspberry Pi 4. The pictured fan is a 40x10mm Noctua NF-A4X10-FLX at 5V. The two pin converter has dupont-style socket headers crimped on (crimp headers aren't provided). If you're…
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
PrintablesJake90
Creality Ender 3 V2 bottom mainboard noctua 40x10 + 2 lm2596
bottom mainboard part for install a silence fan (noctua) 40x40x10 + 1 or 2 lm2596 dc dc (24 to 12 for fan 12V DC) silence your PSU (noctua 60x60x25 fan) https://www.printables.com/it/model/477281-ender-3-v2-psu-fan-60x25 Print Settings…
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
PrintablesAlex
40x10 x-fusion E1 air shock suspension bushing/spacer
Initially I made this part as a temporary replacement while I waited for new aluminium bushings to arrive, but it seems like they work just fine, I've been riding the bike like this for at least half a year and no play developed in the…
- Downloads
- 23
- Likes
- 5
- Rating
- 0
P
PrintablesGabecar3
Yaqi 40x100mm Shaving Brush Travel Tube
Customized version of https://www.thingiverse.com/thing:2782491 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2782491 Instructions Using the following options: diameter = 45 height = 105 vent_height =…
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesLittleJoeMuc
Creality CR10 case fan adapter for 40x40x10mm
A siple spacer to mount a 40x40x10 mm fan instead of the original one. It is 7.5 mm thick and You can reuse the original screws.
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesAndreagattonero
90º bracket for using 40x10 fan + buck-converter
I've designed this fan bracket with the Flashforge Creator 3 in mind, but I've since made it usable for many other situations where you need to have some active cooling, and a mount was not provided while the space is limited. Plus your…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesMVLPGaming
Customizable - Noctua 40x40x10 Cover
[GER / DE] Anpassbare Noctua 40x40x10mm Lüfter Cover Diese Cover sind für Noctua 40x40x10 Lüfter gedacht. Mit diesen Covern, kann man seine Lüfter „verschönern“ und nicht immer nur die drehenden Lüfterblätter anschauen. Die Cover können…
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
Printableskandrix
140x100mm Honeycomb Picture Frame
140x100mm honeycomb picture frame. Honeycomb design created by removing bottom and top layers and modifying infill honeycomb pattern and density to my liking. I ended up printing 15% honeycomb. Increased number of perimeter walls to 4 for…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesNandito
Kingroon KP3S adaptador ventilador 40x40x10,40x40x20
Kingroon KP3S adaptador ventilador 40x40x10,40x40x20, menos ruido y mas flujo Print Settings Printer: Kingroon KP3S Rafts: No Supports: Yes Resolution: 0,2 Infill: 50 Filament: Smartfil PLA Negro Notes: Con un ventilador Noctua ,no el de…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesRaphael
40x10mm Fan mount
Use a 40x10 mm fan. Glue is used to fix the fan in place. There is space to hide exess fan cabeling. Use Neodymium 18x8x4mm Magnets to attach it onto the PCs iron frame.
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesStadi
fan grill cover 40x40x10mm Audi
Stilechter Kühlergrill für den Anycubic Gehäuse für Noctua NF-A4x10 FLX, passt aber sicher auch auf andere 40x40x10er Lüfter. Wenns vom Drucker her passt hält der Logo-Ring stramm im Gehäuse, falls nicht einfach den Ring im Slicer 0,1mm…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesRaphael
40x10mm fan mount 90°
Used to cool a Chipset heatsink, 90° bend Fan used: Noiseblocker XM2 Magnets used: Neodymium 18x8x4mm
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesIvan Maric
40x40x10 Fan Thingy
Screwdriver + Fan = another broken part that i had to remodel… yippie… have fun with it. best part? I ripped the electronics of the fan out and destroyed it somewhat… so in the end i had to order new fans printed it on my ender 3 on…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesSergey Filimonov
Jonsbo N10 3x(Fun 40x10)
3D model of a bracket for the Jonsbo N10/NV10 case that mounts above the CPU and secures three 40×10 mm fans.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesGabecar3
Yaqi 40x100mm Brush Travel Tube
Customized version of https://www.thingiverse.com/thing:2782491 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2782491 Instructions Using the following options: diameter = 45 height = 105 vent_height =…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesQuailValley
40x10x5 Magnet Holder
Needed a way to hold a strong 40x10x5 magnet as well as have some indication of polarity. Print the model pointing up, squirt some super glue in the hole and stick in the magnet.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesS Ubes
40X40X10 fan shroud
Made this to cover my hotend fan. May not work good for someone without my unique setup. Ender 5 S1 with a spider V3 hotend/mount adaptor that i use, made this shroud to close the sides mainly for better cooling/heat creep tendency when…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesjodoll
Fan Shroud for Noctua 40x10 on Inspur LSI 9300 8i
A fan shroud that will fit a 50x50x11 (mm) heat sink, like on an Inspur LSI 9300 8i. You'll need a Noctua 40x10 fan, although any other 40x10 might fit, just make sure the cables are on the right side. I've added the source file in…
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
Printablesthe78mole
Currogated Pipe Holder for 40x40x10mm Rexroth Aluminium Construction Profile
This model contains a construction profile currogated pipe holder. It fits to 40x40mm profiles with 10mm groove. It can take 16, 20 and 25mm pipes. It can be rotated by 45° before tightened to the profile. You need a sliding nut or other…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesMidoriK
FanCover/Case 40x10mm
This is a cover for a 40x10mm fan. I wanted to cover the fan somehow after modifying the cooling in the Ender3v3SE. The design comes in four variants and is printed in PLA. If you like the design, consider leaving a tip ;) Jest to cover…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesKalalicious
Fan Bracket for LSI 9207-8i with Noctua 40x10mm Fan (NF-A4x10)
This simple little bracket dropped the temperatures of my LSI 9207-8i HBA card from almost 100C down to 39C (as measured by my temp guns). This can only help extend the life of the card. I remixed the original design to accomplish three…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Updated Case for RPi 4 to fit in 40x10 Fan & Armor case radiator
Updated Case for RPi 4 to fit in 40x10 Fan & Armor case radiator
P
Printables
Lack v1 40x10mm Enclosure Fans
I was looking at the cooling fan design from @dougmeek. However, I have a lack v1 enclosure. So I took inspiration from his design and add/updated it to support a v1 lack enclosure, where the full 50mm width of the top table still exists.…
P
Printables
UniFi AP magnetic mount (40x10mm rectangle magnets)
I snagged RFZ's design and customized it for 40x10mm magnets, because that's what I had on hand. My 4 magnets weren't enough to hold the dish up... it kept sliding down. Threw a couple more in to the empty spaces for the mount to sit…
P
Printables
Hydra Fan Duct & Tool Change V6 Edition Extended BLTouch for 40x10 Noctua Fan
This is an extended BLTouch Mount for the Hydra Fan Ducts, aiming to fit a 40x10 Noctua fan to cool the hotend This goes hand in hand with this: https://www.thingiverse.com/thing:3154199 Edit 15/12/2020: The linked Thing doesnt work with…
P
Printables
Orange Pi 5 Case with External 2.5" SSD Mounting Bracket and 40x10 fan.
This is a printable case for the Orange Pi 5. It is intended to be assembled with m3 screws, used with heat set inserts (Amazon # B09KZSJS88). This case is about as low profile as I could make it. There are rails on the bottom to hold a…