Counting matching models…
A robust, fully 3D printable hinge designed for your everyday DIY projects. Measuring exactly 40x50mm, this model features countersunk screw holes to ensure your screws sit perfectly flush for a clean, professional finish. It is the…
After searching and trying many other models for Continental or Veyron model scopes, they just never sat right. The knurling pattern used on the Sentinel is different and so the ring always sat on top of some teeth. After a few versions…
Parralax or Focus wheel for Vector Optics Sentinel-x Pro 10-40x50 scope. Hardware needed: 1x M3 Bolt and Nut. It is fiddly to add the bolt and nut because I wanted a design that hides the nut and bolt as much as possible. Any feedback is…
Smaller Profile full Parallax Wheel for Vector Optics Sentinel-x Pro 10-40x50 scope.
I always missed a small 90-degree square to set the table saw or check the angle of the material after cutting. Metal and accurate are expensive. I made the project and it works. Arms 40x50 mm. Foot 10 mm. I printed it in PLA. Layer 0.1…
This 3D printable junction box measures 70x70x50mm (2.76x2.76x1.97in) with an opening of 40x50mm (1.57x1.97in) Layer height: 0.2 mm Infill: 20% Supports: Recommended for overhangs Material: PETG recommended (more durable than PLA)
ARD built for the Vector Optics Sentinel-x Pro 10-40x50 scope with an integrated mount for the SCACD-22 screw in bubble level. I suggest using 1 strip of black electrical tape to line this. It prevents plastic scuffs to the scope and adds…
Simple container storage compartment 230x140x50mm
Parralax or Focus wheel for Vector Optics Sentinel-x Pro 10-40x50 scope. Hardware needed: 1x M3 Bolt and Nut. It is fiddly to add the bolt and nut because I wanted a design that hides the nut and bolt as much as possible. Any feedback is…
Small storage box originally made to be used for a person with reduced mobility (PRM) walking chair where wallet, phone etc. can be stored. The box was printed in PLA material (however, I would recommend PETG as it has better material…
Oil seal driver for TC 40x50x5 seal used in speed sensor of Aveta Ranger Max Explorer (Malaysian market) / G-Moto Cross X Pro (Russian market). It uses stock axle as guide rail and has a notch for speed sensor rotor. Seal should be fitted…
Another Hinge ! I was mounting the Fly screen with hinges and a tool free latch so my wife can open it as well. Hinges supplied with the screen are flimsy so I printed new ones. For the hinge pin I took a 2,7 mm nail (do not know what…
I created this tiny little shelf which is 40mm deep and 50mm wide. It
A continuation of my first 90 degree angle. This time it's 45 degrees. Arms 50x60 mm. Foot 10 mm. I printed it in PLA. Layer 0.1 mm. I recommend it, it makes work much easier, e.g. in wood.
