44 models
Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.
Press to fit End Cap Fit Bosch-Rexroth extrusion 45x45 profile I print them solid, they fit sung
I designed this part, to fit some of my university's projects, where we made work tables out of 45x45 profiles from Minitec. The floor side is meant to spread the area of contact, creating a little bit of a stable base. These can also be…
A 90mm length of 45mm x 45mm aluminium extrusion
Keychain Zodiac Tags
Krytka na Al. profil Maytec 45x45
Remake of the original using Fusion 360. f3d file included. Mount a Bosch Rextroth 45x45 aluminum profile to a table. Layer hight: 0.2 Infill: 20%
Hey everyone, I needed an end cap for my 45x45 aluminum profile. The four inner flaps create a nice friction fit so they don't simply slide off. Check the profile in the second picture to verify your profile looks similar. Let me know if…
Shelf bracket in size 30x30x30 Print on the side for better stability. --------------- Regalhalterung in der Größe30x30x30 Auf der Seite drucken für bessere Stabilität. Hit Like, rate and comment! I appreciate your support!
Minitec Profil 45x45 Endkappe
In the STL file, both models are included, one oriented vertically and the other horizontally. I printed it in PLA with a 0.2 layer height and a 15% infill. Ideally, it should be printed with PETG or flexible filament to provide some…
Mount for your thurstmaster warthog joystick on you 45x45 simrig. For the vertical version, the axes must have been threaded as shown on the picture. Then you put the mount with srews. I added a cover so the joystick's electronic won't be…
A 90mm length of 45mm x 45mm aluminium extrusion
Petite équerre à avoir sous la main pour créer des étagères supportant des accessoires.
clean and fast design to cover the rails of your cockpit
This is an adapter plate for F450 or Q450 quadcopter frame (DJI/similar clone frames). Some 450mm frames have 4 screw holes on the top plate. If you wish to use a Betaflight based FC (or any other FC with 30.5 x 30.5 mm mounting holes)…
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
cockpit mouse support
The thread M6 is one the tighter side, tools are necessary for standard M6 screw. Please note, that your printers accuracy/tolerances may differ from mine, scaling may necessary. If you're interested in other thread-sizes or models for…
Mount a Bosch rextroth 4545 alu profile to like a table. Layer hight: 0.2 Infill: 20%
This can be used if you need to have a foldable 45x45 leg. Instructions Print and mount. Ps: I ran out of black PLA when printing the holder. That's why the holder is in dual color... :) Category: Other
An extension of this thing ( https://www.prusaprinters.org/prints/73985-thurstmaster-warthog-joystick-mount-for-45x45-90x4 ) but now for the trottle. Works fine for me... Enjoy :) Print Settings Printer Brand: Creality Printer: CR-10…
A fun maze! Size is 45 x 45. Use a 3mm steel ball. You can find the solution in the pictures. Fun toy or puzzle for everyone! This is smaller than my 35x35 Maze and a bit more complicated.
Two pieces. Without screw. Compatible with all keyboards
This is a caster adapter for 45x45 Bosch Rexroth aluminum t-slot extrusions. The fit is tight and I had to use a rubber mallet to hammer it on. Caster attachment holes are 27.5 mm apart. To adjust them, adjust casterPlate_w to the…
Deckt das Aluminiumprofil von Bosch ab. D10.3 innenfedernase
Filament Spoop Holder for up to 2,2 KG Spools Bolts are Used M8 Alluminum Tube was used: 20mm outer Diameter 8.5mm inner Diameter 200mm long Spools 3D Shown From: https://grabcad.com/library/filament-spool-stand-by-pax-1…
Functional T-Nut M4 Metal (Square Nut) print them solid, with supports
Die untere Schicht kann mit TPU gedruckt werden, dann hält die Platte besser an der Kamera. Ich hatte die originale Platte verloren, eine Ersatzplatte bestellt, die nicht gepasst hat. Also habe ich die Metallteile der falschen Platte…
petg, 30%infil, 0.20
Hey everyone, I needed a corner cap for my 45x45 alu profile corner. The two flaps create a nice friction fit so they dont simply slide off. Print a 45° angle for best surface finish and strength. Let me know if you need a different design.
internal dimension 45x45 external dimension 100x100 height 85 mounting diameter 6 mounting diameter to substrate 10
I got fed up with my old X52 and decided to spring for a set of VPC sticks, but couldn't find any good mounting solutions for them. This mount is designed for a 45x45 aluminium slot profile and will pretty much not allow any unintended…
pla or petg, 20%infil 0.20
A simple file for taking out a Tarot 690 Hex middle plate and placing a 30x30 or 20x20 flight controller/esc. Mounts using 45x45 holes Print in material of choice, I used Rose PETG from California Filament
I wanted to set firmly the oculus sensor to my sim rig (profile 45x45)... Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I used brim Category: Games
Small simple box with latching tabs and optional 6 x 2.5 mm magnet
Snap-in Cable Holder 45x45 Snap-in cable holder for Alutec KK 45x45 aluminum profile with 8 mm slot. Designed for this profile: https://katalog.aluteckk.cz/produkt/profil-45x45-ekonomicky-104545e/ The holder is inserted into the slot and…
Ho voluto creare una clips dedicata per questa struttura in alluminio con sede 8mm e misura 45mm x 45mm Pla Prusament galaxy silver Supporti solo dal piano di stampa
Sick inspector robot vision 45x45mm extrution mount. Can be mounted as an extension to extrution if needed. Printed in pla, upright with no supports.
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
Small simple box with latching tabs and optional 6 x 2.5 mm magnet
