Search results: 48s

Sort order

41 models

P
PrintablesRobertoooo

Guition ESP32-S3-4848S040 EU wall mount

This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…

Downloads
977
Likes
53
Rating
0
P
Printablesmarcusone

Sunton ESP32S3 8048s043c 4.3" Screen Case

Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…

Downloads
887
Likes
29
Rating
5
P
PrintablesVanix

CYD 3.5" Case - esp32-3248S035

Case for "CYD 3.5" capacitive touch. (ESP32-3248S035C) Display and case on one level. For example: https://de.aliexpress.com/item/1005005928255980.html?spm=a2g0o.order_list.order_list_main.11.4a535c5fYamG2U&gatewayAdapt=glo2deu Fits the…

Downloads
734
Likes
52
Rating
4.75
P
PrintablesMegaAndy

Guition 4 inch Screen Frame and Stand (ESP32-S3-4848S040)

Version 2 update: Version 2 of the frame has some notches to click the frame into the rear section. This is a snug fit that snaps into place and is difficult to remove it again but will pull apart without damaging. Version 2 of the…

Downloads
477
Likes
221
Rating
0
P
Printablesjeepers01

ESP32 5inch Touch IPS LCD Screen Case for 8048S050

ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…

Downloads
463
Likes
34
Rating
5
P
Printableskiklhorn

ESP32-8048S070 N/C case

ESP32-8048S070 N/C case

Downloads
439
Likes
23
Rating
5
P
PrintablesAlfem

Box for Sunton esp32-3248S035 board

I have got this amazing and cheap (<20€) board sporting an esp32, 3.5 TFT, multicolor LED, SD-card reader and many connectors for audio, sensors... But it is a development board, and unfortunately a nice enclosure was not available. As I…

Downloads
348
Likes
15
Rating
5
P
PrintablesMichal Schwarz

Wall frame for 3.5" LCD TFT touch display "ESP32-3248S035"

Frame The frame is as small as possible while maintaining at least a partial symmetry and some space for the wall mount. It can be printed face down without any supports or a brim, but the wall mount will need to be printed diagonally…

Downloads
324
Likes
19
Rating
0
P
Printablesgzilli

ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]

ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]

Downloads
315
Likes
22
Rating
0
P
PrintablesCrypto

Stand for the Guition Esp32s3 4848S040 4-inch

I've been using jtenniswood's project for making easy LCD control panels (https://jtenniswood.github.io/espcontrol/).

Downloads
279
Likes
23
Rating
5
P
Printablesmarkusdd

Sunton 7inch Display Housing (ESP32-8048S070) with rounded corners

Like the original, but faceplate with rounded corners and even frame width

Downloads
242
Likes
10
Rating
0
P
PrintablesSarah Matthies

Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display Case Wallmount

This is a simple casing for the Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display. The display fits just right with additional space at the back to place battery. The USB C connector is still reachable for easy charging.

Downloads
234
Likes
19
Rating
0
P
PrintablesStefanN

Sunton 7inch Display Housing (ESP32-8048S070) with Stand (FreeCAD)

The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…

Downloads
217
Likes
5
Rating
0
P
PrintablesChrisHerman

CYD 3.5" Case - esp32-3248S035 with clips

the 0.6mm clips hold the PCB in place so you do not need screws. The back cover is unchanged from the original. It already snapped in place without screws. I printed on a Creality K1 with 0.4mm nozzle and 0.2mm layer hight.

Downloads
202
Likes
17
Rating
0
P
PrintablesJulianB

Sunton 7inch Display Housing (ESP32-8048S070)

This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…

Downloads
180
Likes
8
Rating
5
P
PrintablesJager

Case for Guition 4848S040 4"

The case consists of two parts, which are attached to each other using 8 magnets 6x3mm. The adapter can be used as a standalone case for mounting the display on a metal surface. No support is required when printing.

Downloads
173
Likes
15
Rating
5
P
PrintablesHelheim

Sunton ESP32S3 8048S050C 5.0" Screen Case

Sunton ESP32S3 8048S050C 5.0" Screen Case https://www.aliexpress.com/item/1005004952694042.html I printed in PETG. All credit for the original design goes to marcusone

Downloads
140
Likes
9
Rating
0
P
PrintablesMarco64

Display enclosure for 7 inch ESP32-8048S070C touchscreen display

This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you…

Downloads
128
Likes
8
Rating
5
P
PrintablesProtoncek

Guition ESP32-4848S040 LCD dose

ESP32-4848S040 LVGL display wall mount dose. No holes, drill them where you need them after print. For two screws use heat inserts.

Downloads
77
Likes
7
Rating
0

Guition ESP32 4848S040 display mount for European flush-mounting box

Mount with a recessed pocket for the screen, no fragile plastic clips, for surface-mount installation onto a standard 60 mm flush-mounting box. Oblong holes allow horizontal alignment adjustment (tested with Legrand flush-mounting boxes).…

Downloads
71
Likes
6
Rating
0
P
PrintablesTheMay

Sunton ESP32-8048S070 Display Case

A remix of @kiklhorn s Display Case I made the case symmetrical and tried to make it as basic as possible.

Downloads
62
Likes
3
Rating
0
P
PrintablesMinty Trebor

4inch 4848S040 ESP32 Screen Case/Stand

Case stand for the 4inch 4848S040 ESP32 Touch Screen Printed @ 0.24 layer height in PLA - no supports

Downloads
54
Likes
5
Rating
0
P
Printablesmcducx

esp32-8048S070

esp32-8048S070

Downloads
52
Likes
3
Rating
0
P
PrintablesKRO Labs

3.5" ESP32-3248S035 CYD Case

This is a straightforward two part case for the ESP32-3248S03 CYD 3.5" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.

Downloads
48
Likes
5
Rating
0
P
Printablesmiyconst

Fan adapter for passive cooled ex-mining AMD RX 580 8GB 2048SP

Simple 92mm and 120mm fan mount for a unique ex-mining AMD RX 580 8GB 2048SP with a passive cooler and a single HDMI port. I could not find any info on this particular model but this card on AliExpress seems to be using the same cooler. I…

Downloads
46
Likes
6
Rating
0

Holder Screen ESP32-4848S040C

It is necessary to remove the back cover and replace it with the printed model. PET_G. 0.16

Downloads
45
Likes
8
Rating
5
Downloads
44
Likes
4
Rating
5

Guition ESP32 4848S040 display mount for Schneider Mureva

Mount with a recessed pocket for the screen, no fragile plastic clips, for surface-mount installation for an outdoor Schneider Mureva fixing frame. This is a test as I'm not sure how the Guition display can handle the outdoor conditions…

Downloads
33
Likes
6
Rating
0
P
PrintablesMINT-Labs

Lid with wall-mount for Box for Sunton esp32-3248S035 board

Lid with wall-mount for Box for Sunton esp32-3248S035 board

Downloads
31
Likes
1
Rating
0

ESP32-8048S070 display stand

I wanted to a stand for my ESP32-8048S070 which had the touchscreen flush with the stand without a bulky bezel, with a very sturdy durable stand whilst still looking good. All the cases and stands I found had chunky bezels and the screen…

Downloads
23
Likes
1
Rating
0
P
Printablesrainb0w_wheez3
Downloads
14
Likes
2
Rating
0
P
Printablesjattie

DH48S-S Timer with Universal AC Plug

DH48S-S Timer with Universal AC Plug

Downloads
12
Likes
2
Rating
0
P

Sunton ESP32S3 4.3" IPS Outdoor Case 8048s043c

This is a case I made to incorporate my 4.3" display as a keypad on my gate outdoors. It has a big “belly” so you can have your necessary components inside. I have: LM2596 buck converter on top 3.7V battery, small BMS with 5V output, PNP…

Downloads
9
Likes
0
Rating
0
P
Printablesjattie

DH48S-S Timer Casing

A casing for a DH48S-S timer with a hole for a power cable and mounting holes for a pause and reset button.

Downloads
9
Likes
1
Rating
0
P
PrintablesTheMay

Sunton ESP32-8048S070 Display Case V2

This is a Remix to the previous model, making it the improved Version 2: - better screwholes (not breaking anymore) - added spaces for sensors HLK-LD2410 (NOT HLK-LD2410C or any others) - added space for BH1750 Light Sensor - overall…

Downloads
7
Likes
1
Rating
0

GUITION 4” ESP32-S3-4848S040 case

Replacement for an old casing with broken connection latches

Downloads
7
Likes
1
Rating
0
P
PrintablesPrebbsit

Guition 4848S040 (ESP32-S3 4" Touch Panel) SKÅDIS Mount – Clip-in Back Plate

Fitting: Remove the two small screws holding the stock plastic back plate on, and lift it off. Keep the screws and the old plate in case you want to go back. Clip this plate on in its place. No screws needed. Hang it on the SKÅDIS: push…

Downloads
6
Likes
0
Rating
0
P
PrintablesBram Vanuytven

Jingcai ESP32-8048S070C 7 inch Display case

Snap-Fit Desk Stand for 7" ESP32-8048S070C Display A screwless desk enclosure for the 7" ESP32-S3 touch display (ESP32-8048S070C, sold by Sunton / Jingcai, 800×480, capacitive touch). The parts simply click together, so no screws, inserts…

Downloads
2
Likes
1
Rating
0
P
Printables

CYD 3.5" Case - esp32-3248S035 with clips

the 0.6mm clips hold the PCB in place so you do not need screws. The back cover is unchanged from the original. It already snapped in place without screws. I printed on a Creality K1 with 0.4mm nozzle and 0.2mm layer hight.

P
Printables

Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display Case Wallmount

This is a simple casing for the Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display. The display fits just right with additional space at the back to place battery. The USB C connector is still reachable for easy charging.

P
Printables

Wall frame for 3.5" LCD TFT touch display "ESP32-3248S035"

Frame The frame is as small as possible while maintaining at least a partial symmetry and some space for the wall mount. It can be printed face down without any supports or a brim, but the wall mount will need to be printed diagonally…