Counting matching models…
GIGGA SCRATCHA™: the Rolls-Royce of back scratchers. After trying plenty of back scratchers that were too short, too flimsy, too sharp, or just generally disappointing, I decided to make the one I actually wanted. The result is the Gigga…
I have created a model of 2020 aluminium extrusions as I had found it difficult to find a clean model online so to make it more convinient for others I had mad a simple stl file of an aluminium extrusion. If you want to build a fully…
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
These are side panels for the Ratrige 400mm V-core 3.1 with enclosure model 2.0. This one I made because I could not find any for the plug that I have. It's for an AC plug that measures 2.25in tall by 1.25in wide. How to edit this. There…
I made an enclosure for a 3D printer using 500mm long 2020 aluminum extruded profiles and 500mm square acrylic panels for a partition. Below is a comparison with the enclosure using IKEA's LACK.…
A Bahtinov mask add-on for my Nikon 200-500mm f5.6 diffraction spike generator meant to assist with achieving perfect focus in astrophotos. It uses the same mounting ring to attach to the front of the lens hood. Print in black filament to…
This mod is to be use with 500mm extrusions that are easier to buy without custom orders. I also gave it more depth inside to grab more of the extrusion and be more steady. This is for the Voron 2.4 350mm version. The extrusion that I…
My YouTube video: Stock mainboard, stock steppers, almost stock firmware(only changing max temp of the hotend) I've changed every printed part into Polymaker carbon fiber nylon(PA6CF) and added some mod, which is listed down below. Those…
Ich hab die Leitkegel 1 zu 1 nachmodelliert und so gespeichert. Jeder kann sich die Kegel skalieren wie er sie braucht. Für mich hab ich die auf M1:10 optimiert, aber jeder andere Maßstab sollte auch funktionieren. Da ich bei meinem…
This is a quick remix of Dalton's feet for the Dofiki 500mm honeycomb bed. It is slightly larger than the TwoTrees.
These are my upgrades for the Creality CR-10 S5 500mm printer. The frame braces and spool holder uses M8 threaded rods and M8 nuts. The spool holder uses two 608 ball bearings The rods must be at least 72 cm long for the two braces and 15…
This is an OpenSCAD remix of https://www.thingiverse.com/thing:2168672 Customizer didn't work, and I needed one for my Opteka 500mm f/6.3 lens I am currently using on my OpenAstroTracker to get focus right. I will re-upload if more…
Rat Rig V-Core 3 spine that is actually big enough to secure all your wires. Used with Mandala Rose Works panel. https://mandalaroseworks.com/products/ratrig-vcore-3-electronics-panels Category: 3D Printer Parts
Modified V3 Version from the original model. Can be used with 500mm profiles. The print files includes easy to remove support. If you print the body in PETG, please choose PLA for the interface (Support → Support/raft interface). If you…
Needed a mount for my Fluval planted light that would fit a 20-gal long rimmed tank, and saw this one made by Nolibert. However, it wouldn't work for my tank or light since it's far too small, so I made some minor adjustments. Tank grip:…
Solar filter for the Canon RF 100-500mm F4.5-7.1 L IS USM lens. This solar filter fits snugly on the end of the lens. You will need the actual solar film to construct this as the 3D printed parts are only the frame. You can buy this on…
mount for the LDARC 500mm whoop gate (like this one https://www.youtube.com/watch?app=desktop&v=7EiHoK-raqc ) holes for zipties and for a 1/4 camera mount screw. double face adhesive tape is also an option. print with no supports. I've…
CZ: Víko které překrývá terárium, zabraňuje útěku křečka a pádům předmětů do terária. Přidáním jména mazlíčka jsme získali originální kousek ,který udělal dětem radost. Tisknutí z ASA bez spodních a horních vrstev pro vznik dírkovaného…
Designed to help keep your lathe clean and look better. You can adjust lenght of it by scaling. Mine is printed out of PLA with 45% infill fits nicely and tight. Would like to hear your opinion about it.
Convert your Ender 3 into a monster 3d printer! With this setup, it can surpass 500mm/s and 10k acceleration 😱 Video proof: Boss Garage - Youtube video ✅ Extruder: BMG clone ✅ Hotend: Creality Spider V3 ✅ Probe: CR Touch ✅ Dual z-axis:…
Adjustable telescope ring for Aquila FMC 90/500mm refractor or similar types. You need print these parts: 1x ring 3x knob 3x cap BOM 3x DIN603(ISO8677) M6x40mm screw 3x M6 Nuts 1x PU-300 Swiss Arca Quick Release Plate 300mm 3x 1/4" D-Ring…
Massringe fuer Hundehalsband Anwendung: Dieses Projekt ist eine Kette von Massringen zum Anfertigen von Hundehalsbaendern. Die Ringe sind stapelbar. Jeder Ring hat ein Faehnchen fuer Beschriftungen. Diese Masskette beinhaltet Ringe des…
I tried to recreate the tiny control horns that come on the 500mm rc planes like the spitfire. I could only find them for sale for $10 plus, and said no thanks. So I did a quick print and it works great. It if very small and thin, so I…
Printed 0.1 100% infill
pretty simple really, chop an emergency blanket and tape it on. you will need 2 layers in total to protect your camera enough for a direct look into the sun. magnets are 6X3mm i think? video of my humble non-professional results:
Here the lens cap that I created to go with my vintage Tokina catadioptric 500mm tele that was sold without it. I had success printing it in a 95A shore TPU with a Prusa I3.
A teleobjetive Bahtinov mask used to focus astrophotography. STL for Teleobjetive TTArtisan 500mm f.6.3
Replacement rear filter holder for Yashica Reflex super telephoto lenses. Made to fit generic 37mm filters. I used these from aliexpress https://aliexpress.com/item/1005004547509306.html
Please be very careful when attaching this! I printed mine with PETG and a layer height of 0.2mm
You need two M10 bolts long enough to fit through your handle. I made a handle from a piece of wood and drilled two 12mm holes, since the handles on the wood splitter sits at an angle you have to make bigger holes than 10mm so it can…
When building my Piper 2, 500mm+ gantry, I had issues with the 10mm wide belt being pulled out of the slave side when applying tension the opposite side. These little gadgets will clamp on the belt, keeping it from sliding around and out.…
I couldn't wait for the new X-Controller to come out so I made a laser cut case for my X-Carve electronics and I added a lot of the options to the base. The relay is internal and has two plugs with separate switches which allows each one…
A FMS 500mm PA-18 Super Cub holder print as shown in picture
a holder to mount to the underside of a shelf to hold your fms pa-18 500mm bush plane. I used sticky 3m stuff to hold them on
Hello, This is a guide to have a 500mm radius, i also added a little puzzle piece so you can attache mutiple pieces together in differents directions. I use it to lay down modelrailroad track. I printed it in PLA, no support needed.
Dieser Ring bietet euch die möglichkeit, euer eigenes Logo in die mitte zu setzten, der Ring hat einen durchmesser von 500mm (50cm) und ist 24mm hoch. Und dient perfekt zur monterung an der Wand,
A Bahtinov mask, that fits onto the TTartisan 500mm f6.3. I tested it with a a7II, where it worked fine. Printed on P1S with PLA, it fits perfectly.
Universal MMU Filament Buffer This is a universal MMU buffer that stores approx. 40 -50 cm of filament in an enclosed housing. The filament is protected from dust and stays dry noticeably longer, even if you leave it in the buffer between…
Attaches 500mm 2020 aluminium extrusions quickly and easily to a 350mm Voron to form a roof rack for mounting whatever you require. Uses common 500mm lengths of 2020 aluminium extrusion. No tapping or drilling required. Readily available…
This lens hood seems very hard to find and just not very common, so printing it is! Printed in matte black petg. I used adaptive layer height to get a few more layers in the first few mm, but the rest is 0.2mm. No supports.
Dieser Ring bietet euch die möglichkeit, euer eigenes Logo in die mitte zu setzten, der Ring hat einen durchmesser von 500mm (50cm) und ist 24mm hoch. Und dient perfekt zur monterung an der Wand,
I tried to recreate the tiny control horns that come on the 500mm rc planes like the spitfire. I could only find them for sale for $10 plus, and said no thanks. So I did a quick print and it works great. It if very small and thin, so I…
We present our own custom design of a remote-controlled glider. The model was 3D printed using LW-PLA. General specifications: Wingspan: 1530mm Length: 1400mm Height: 220mm Total weight: (+/-) 515g 3D Printer min. bed size:…
This is a shortened lens hood for a Nikkor 500mm 1:4 D AF-S. This is an older lens - both sizable and heavy but also a great optic. The shorter hood allows me to fit the whole assembly into a backpack ready to pull out and shoot. I…
This lens hood seems very hard to find and just not very common, so printing it is! Printed in matte black petg. I used adaptive layer height to get a few more layers in the first few mm, but the rest is 0.2mm. No supports.
A lighter body for Boeing 307 Stratoliner Parts in pink from Boeing 307 by chryslerjunkandstuff New wing parts addid New necel parts addid Alternative cowling parts addid Parts to be assembled as per picture starting from front to tail…
This design contains all you need to create giant lights based on IKEA Strala or LEDs strips. I recommend going with the Strala version with a 350 lumens light. The LED strips version is also interesting when used with RBG or Neopixels…
12mm x 1500mm treaded lead rod for linear movement
