Counting matching models…
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
I wanted to try something... so I decided to go for a fully AI generated Goblin Army. And as you see, it worked! It wasn't that easy, AI still producing shitty meshes, a lot of rework to do, so you still do need some 3D modeling skills to…
Note: I've added another version of this mod that doesn't require cutting the focuser tube, but adds an additional 5mm to the length. The adapter is called no_cut_m58_focuser adapter. This is a set of adapters to add a 25-55mm helicoid…
This is a clip-on shroud for the Sky Watcher Heritage/Virtuoso GTI 150P telescopes. It is designed to work with my focuser upgrade, but can be used without it. The complete build requires 3 plain shrouds, 1 focuser shroud and 8 clips. The…
This is a stand for my collection of UK 50 Pence coins. Each plaque holds 7x 50p coins with the stand holding 7 plaques in total (49 Coins). The plaques hold a 50p in place with out any glue, although your print may need some tweaking…
This is a reference model of the LS-550PC-63649 Brushed Motor (commonly found in cordless drills.) This should hopefully save some folk time designing other stuff. You can view/download the Fusion 360 project here. https://a360.co/2VGrlLR…
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
A nice comfortable grip for your original RG350P and RG350M The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Game pad secures your…
It's not as easy to use as the original, but it saves a lot of drawer space. EAN: 4932464944
Cover plate to avoid a light leak on the main mirror cell
This is the stock case included in the BlueSCSI repo created by Androda and uploaded here with permission. BlueSCSI 50 pin Desktop models 2022.12a-2023.09a, 2023.10a Select the file that matches the model printed on your PCB.
Needed something to allow the attachment of a 3rd party focuser to replace the stock helical focuser. This should fit anything with a male M42 thread. I used an ‘Adjustable Focusing Helicoid Adapter, M42 to M42 Focusing Helicoid Lens…
!!WARNING!! After placing your RG350P into this game pad holder, be prepared that you never ever want to play in a different way. After experiencing the comfortable grip it will feel all wrong to you using your device without it! You have…
9mm Luger ammunition box for reloaders and competitive shooters. My two-part design provides a superior solution for storing, transporting, and organizing up to 150 rounds. What makes it stand out? It cleverly utilizes the plastic inserts…
Skywatcher 150p Virtuoso secondary mirror holder with 58mm spacing between bolts for focuser. Maybe you can edit it for your focuser. For the secondary mirror you can use 3 heat inserts and the original hardware from the stock secondary…
RADTEL RT-950 ,HIROYASU HI UV-850pro, BAJETON BJ-9000 bicycle holder for handlebars from HF7POL
The shape and thickness of my new monitor does not really allow positioning the BenQ Screenbar on top of it. Furthermore the slightly curved display isn't an ideal mix with the non-curved LED bar. So I've created this adapter plate to…
This is a homage to the brutalist masterpiece that is the '50p building' in Croydon, also known as the NLA tower, threepenny bit building, wedding cake and now Number 1 Croydon. https://en.wikipedia.org/wiki/No.\_1\_Croydon Made up of a…
This is the printed mounting bracket for using a BlueSCSI V2 in the Macintosh Portable. It is compatible with BlueSCSI 50 pin Desktop models 2022.12a-2023.10a. The picture shows an earlier version of the bracket and an older revision…
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits my 150mm Skywatcher 150pds tube. Depending on padding material used, you might need bigger or smaller ring-diameter, but even…
Soft Jaws for Wilton Tools 650P Vise Print in TPU and vary infill % to adjust overall stiffness. Unlike softwood soft jaws, TPU will never splinter and will return to its original shape after deforming when clamping irregular shaped…
For the shroud I recommend a black matte carton paper material over 2mm EVO foam that tends to not hold its shape at the end and thickness that steals light.
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
Remix of soft jaws that were designed for a Wilton 650P to fit a Wilton 450P instead. The original design was intended to be printed in TPU but this one was modified to be able to be printed and still fit when printed from a rigid…
Non-destructive mounting for aftermarket speakers for the Mazda CX-30 and other derivative Mazda speakers of the current generation audio system. Mounting holes designed for the Mark Audio CHN-50P to have enough clearance from the door…
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
This mounting plate matches the original one which comes with the Vlokda S50Pro dashcam. I've included a STEP file, so that you can modify it and add it as a mount to any existing suction cup mount you might want to use. The .3mf version…
Worlds Smallest Piggy Bank UK 50p Coin Version
Endcap for the Skywatcher 150pds telescopes cover. It covers a small hole on the telescope cap. I lost mine so made a new one that fits. Printed in PLA, 0.2mm, 15% infill. OBS: If you use the cap to cover for light to take bias or dark…
You can use this bushing to adapt directly to the upper half of this Svbony helical focuser adapter: https://www.svbony.com/products/m42x0-75-reflector Because the bushing is so low profile and the Focuser is as well, the focal length of…
This simple adapter allows you to plug stock finderscope of Skywatcher 150p into the polar finder slot of its EQ3-2 mount. While it's far from optimal and not extremely accurate, it's good enough. You can get pretty good aligment by…
Seestar S50Pro und der TH10 Neiger von ZWO. Mit dem Gewindeadaptter welcher beim TH10 Neiger dabei lag kann ich die Orginal Platte am S50Pro montieren.Es Ist jedoch ein Abstand von ca 1,5mm zwischen der Platte und dem S50Pro. Dieser…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
It is quite sturdy and follows the TVs top profile exactly. A hook on the front face grabs the frame around the display surface, so you will not drop the bar behind the TV or knock it off. Probably fits other Philips PU TVs directly.…
There are two versions: hard surfaced with some slots to the silicone pads (dampers) 8mm (diameter) x 2mm (height), (_pads postfix). tpu rubber version without silicone pad slots, because the whole corner will work as damper, (_rubber…
Tablet clip for Sportop E850P Elliptical, use tablet while training. I use 18mm variant for iPad Air in a thick case, use other variants for different cases / devices. Printed in PLA, to connect it start from the bottom, then clip on top.
Baffle for CHN-50P to be used in a Mazda CX-30. Print in TPU.
Very quick design i made for a Spektrum Satellite Receiver Mount to a ImmersionRC Vortex 250 Pro. Fixed with thin double side tape and a zip tie.
Cover with a fan setup
I bought this compressor for my motorcycle, but it travels with the packages. So the other tings can press the power button and discharge the batteries. So I made this. You can fix it with a rubber, or put the whole thing in a textil bag,…
This is a remix of the dew shield design for GSO telescope, but for a Sky Watcher 10" with 3mm thick EVA foam for the dew shield instead of aluminum siding. I had to rebuild it entirely to split it in 4 pieces to assemble so that it would…
This is a simple jig I designed to make it easier to set up the Sky-Watcher Virtuoso GTi / Heritage 150P GoTo tabletop telescope on a Star Adventurer tripod. This ring slides directly onto the mounting plate of the tripod, and once it’s…
Use black matte PLA for best effect finish.
Print as two colors to have a contrasting color for the "50" The pawn can be flipped upside down to mark a player as having accumulated 50pts + the point tracking board number it is placed on.
More Information I designed these mounts to ensure the scooter's battery pack is held securely and rigidly in place. The model features dedicated slots for zip ties at both the front and the back for extra security. For reference, the…
I don't think anyone needs this besides me. But if: you're welcome.
Non-destructive mounting for aftermarket speakers for the Mazda CX-30 and other derivative Mazda speakers of the current generation audio system. Mounting holes designed for the Mark Audio CHN-50P to have enough clearance from the door…
This custom 3D-printed case is designed to turn a Dell N350P-00 ATX power supply into a compact, multi-output DC bench power cube. The idea was to make a clean and organized way to repurpose an old PSU into a power supply for project…
Note: I've added another version of this mod that doesn't require cutting the focuser tube, but adds an additional 5mm to the length. The adapter is called no_cut_m58_focuser adapter. This is a set of adapters to add a 25-55mm helicoid…
This is a clip-on shroud for the Sky Watcher Heritage/Virtuoso GTI 150P telescopes. It is designed to work with my focuser upgrade, but can be used without it. The complete build requires 3 plain shrouds, 1 focuser shroud and 8 clips. The…
Cover with a fan setup
RADTEL RT-950 ,HIROYASU HI UV-850pro, BAJETON BJ-9000 bicycle holder for handlebars from HF7POL
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
Want somewhere to stash your 50p cash for the next visit to the local to play pool? A compact container that holds £10 worth of 50p coins (x20) that will not promote the embarrassing conversation of “is that a 50p coin holder in your…
This custom 3D-printed case is designed to turn a Dell N350P-00 ATX power supply into a compact, multi-output DC bench power cube. The idea was to make a clean and organized way to repurpose an old PSU into a power supply for project…
3D model description Design Concept The UK 50p 3 Coins Mini Display Stand is designed as an efficient and stylish way to showcase your special edition or commemorative coins. Utilizing a sleek, minimalist design, the stand is a perfect…
Design Concept This display case provides a convenient and organized way to showcase your UK 50p coin collection. Its sleek design ensures each coin is prominently displayed while being securely held in place. Purpose The display case is…
An adapter for the 1650pz stock lens to use 49mm polarize filter have to replace the frontal glass retainer ring with the spacer.
Soft jaws printed with TPU for a Wilton Tools 550P vise. Fits perfect.
Note: the reason the image is different is because it was originally designed for another print but I realised it could be its own part
