104 models
Locking device to lock clutch housing, used on BMW R1150 motorcycles. BMW part number - 11 5 640. Printed in 100% infill with PETG. Works and holds perfectly, even with those five 40Nm and 32° torque settings for flywheel bolts.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I used Sneaks “raspicamcover_lense.stl” and moved the hole from the bottom to the top and added a few bosses to hold the camera against the base.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Se requiere un tornillo de 1 mm, similar al utilizado en reparación de lentes.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
A mount which will let you attach a Raspberry Pi Camera to 40mm Fan Spacing, you can share the same screws with a fan if they are long enough. I couldn't find a similar mount so I decided to go ahead and try to make my own with Fusion360…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Bin for IKEA SKADIS. Hooks need support. Size: A box can be in standard shape , or equipped with a wave and/or separator and/or hexagonal bottom. The separator is not available if the hexagonal bottom is present. Folders: There are 564…
Even after 5 times of printing the AngryCam OV5640 mount of "chri.kai.in" I could not get the thing to print and fit together correctly. The tolerances seem quite tight and you need an extremely precise printer to get good results. Apart…
This is a simple mount for the OV5647 style IR-Cut Cameras that mounts to the Articulating Mount by Sneaks. It has cutouts for 9mm heatsinks, as seen being used for the Raspberry Pis. Simply mount the Camera by pushing it into the Top…
This model is compatible with the lego system.
This is a dead simple camera case for the OKdo OV5647 5MP Raspberry Pi Camera with M12 Lens compatible with the Articulating Raspberry Pi Camera Mount . It doesn't use the ball mount system but instead snaps directly into one of the link…
Voron v0.2 OV5640 camera mount. (100 degree AF on picture) No supports needed. (Voron v0.1) Depending on your bed adhesion a brim.
This model is compatible with the lego system.
Snap fit case for "New OV5640 ESP32 CAM Camera Module Kit WiFi Bluetooth Development Board (shown in picture)". I bought this board at AliExpress.…
This front cover fits the OV5648 USB Camera Module 68 with 120 Degrees, Auto Focu, Flash Light and Microphone with HD 5MP sensor. This specific model was bought from Aliexpress ( link ). The back cover is the same as the original v2 (…
case for HBV 5640 eg Voron 2.4 ---- BOM: 4x M3x10 or M3x12 2x M3x5x4 insert 3x M2x4 tapping screw to mount the cam ----
Just remixed cover to uncover the LED light. Used camera: https://s.click.aliexpress.com/e/_DF4iHKl
Print Requiriments: Filament: ABS, ASA, etc Layer heigh: 0.2 Perimeters: 3/4 Infill: 30% You wiil need only 1) M3 screw 1) T nut. 3) 2.5mm screws
I made this tool after getting a used 2018 Sierra Denali that must've been owned by a hamfisted degenerate; all of the cigarette lighter covers had been ripped off and broken. Finding this tool (Dorman 56457) was needed to remove the…
OV5640 camera the smallest tilting mount with an angle of 0-180° I was looking for a minimalist solution for the camera mount, but everything seemed massive and big, everything is beautiful, but it interferes with the printer's space.…
This is a simple remix of the cover from the original PanzerObserver2.4 camera mount. Check out the original design to see if it's what you need instead. I purchased this camera and it didn't need the extra hole that the original cover…
The case created for camera OV5648 which will be used for LightBurn software. LightBurnSoftware enables to use such camera for positioning things in the laser cutter.…
Assembled with 3mm bolts, freely adjustable. Confirmed works with autofocus and fixed focus versions of the OV5647.
Remix for PanzerObserver ( https://github.com/Slidr666/VoronUsers/tree/18599db8c29c9a272f852d1dac9ad5d014d0a496/printer_mods/Slidr/PanzerObserver2.4 ) cover, to house a different model camera (…
Another Remix of PanzerObserver with a different OV5640 model (FF-160 Degrees) and no logo. Original credits and assembly con be found here:…
This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…
This model is compatible with the lego system.
This is a case for the Arducam OV5647. It was designed to fit on this Cam Boom for the Ender 3, though it should be trivial to make other holders that fit it. The mounting hinge is sized for an M2 machine screw, and should be snug enough…
This model is compatible with the lego system.
Imported from my designs on Thingiverse. Original upload was 13.09.2019 (dd.mm.yyyy) I do most mechanical design. Can maybe do easy som very basic patching. Here my version of the part 6265644 which comes with the new 42099 truck. Print…
The original Creality K1 series camera is widely known for its unreliability and mediocre video quality. This model is a remix of the AngryCam camera mount that allows to install a much better third party camera, either IMX179 or OV5640,…
This model is compatible with the lego system.
Camera mount for the OV5647 Fish Eye Raspberry Pi Camera. Works great with: https://www.prusaprinters.org/prints/150154-elegoo-neptune-2-raspberry-pi-camera-arm
I made a minor change to nicoko's camera cover ( https://www.thingiverse.com/thing:4706284/files ) that works with the ender 3 camera mount ( https://www.thingiverse.com/thing:3294512 ). I'll include the files here, thank you to…
I combined this Camera Case for the OV5647 (M12 Lense) raspberry pi camera with the ball mount from the Articulating raspberry Pi Camera Mount
Minimalist camera mount OV5647 for Sovol SV06 - Hidden cable routing - Easy camera positioning - Does not go beyond the outline of the printer You Need: 1x Back Camera.stl 1x Front Camera.stl 1x Mount Arm.stl 2x Pin.stl If you like my…
Because I had previously used the ps eye camera I wanted to use the arms again and decided to adapt the housing for the IR camera. Therefore, it was also necessary to adjust the arm so that the connection was changed by 90 degrees on one…
Mount for a camera for the QIDI X-Plus 3. The camera is an Arducam 5MP USB camera from Amazon. Arducam 5MP Wide Angle USB Camera for Computer, 1/4" CMOS OV5648 Mini UVC USB2.0 Video Webcam https://amzn.eu/d/7XNr6zw Uses 2 high-quality…
I had a lot of 14mm heatsinks laying around, so I changed the NoIR Model to fit those. And because I wanted a blank front, I removed the lettering. You need 4x M3x10 screws to put together the front and the back. Thanks to @Paul_GD for…
OV5640 I use https://nl.aliexpress.com/item/1005004373450096.html No supports needed. (Voron v0.1)
Remix for PanzerObserver https://github.com/Slidr666/VoronUsers/tree/18599db8c29c9a272f852d1dac9ad5d014d0a496/printer_mods/Slidr/PanzerObserver2.4 just the cover, to a different model camera. Can be bought from here:…
1515 Extrusion Mount for OV5640 5MP USB Cam Designed around the Micron+ (180x180x180) and to be mounted on the top rear extrusion to view the whole bed.…
Retoque el modelo porque la cámara tenía mucho movimiento una vez puesta y le faltaba más ventilación para que no se cal
This model is compatible with the lego system.
I cobbled this together in TinkerCAD because it is a PAIN in the butt to find a camera mount for this specific board (the 36x36 board with the screws on each corner...) so! I made this! I jacked the mount point from one of the camera…
This model is compatible with the lego system.
For the stand use Organic support in PrusaSlicer 2.6. I've printed in PETG, Layer height of 0.2 mm, 15% infill on a Prusa MK3S+. Textured build plate. Needed hardware: (2) M3 nut (2) M3 square nut (insert square nuts before closing the…
Mounting box for InnoMaker CAM-OV5647 I designed this box to use with the excellent mount by lab27 https://www.thingiverse.com/thing:3121052 and the 180 degree remix of the arm by inomad360 https://www.thingiverse.com/thing:4514535 This…
For gantry mounted OV5640 Camera on Voron 2.4. It offsets the camera under the gantry so it won't be blocked by the X axis
This adapter will fit your 100x12mm true axle fork to a Thule fastride. Make it sturdy. PETG, 4 perimeters, 30% infill worked for me.
This is a remix of this mount by Whitefiretiger : https://www.thingiverse.com/thing:5559571 This is designed to work with this specific Arducam Enclosure: https://www.thingiverse.com/thing:5350571 This is also designed to work with this…
A camera mount for the “MakerHawk IR Fisheye Pi Camera OV5647” for the SV06. Designed to fit the modular mounting system arms, which can be found here: https://www.printables.com/de/model/185322-modular-mounting-system-arms-customizable…
Micron+ Front Camera Mount OV5648 3x M2 4mm - Scews Required
A new faceplate to suit the OV5640 camera
I got couple cheap camera modules for Raspberry PI from aliexpress (https://www.aliexpress.com/item/1005004549580517.html) (The one with 67 degree angle and IR modules) Thought to use one of them to monitor my printer - turned out camera…
I wanted a single bracket to hold a camera and a chamber thermistor, along with the camera being on the right side - closer to the Pi. Camera is set pointing down at 10 degrees for best visibility. Use M2x8 (or shorter) self tapping for…
Replace the original M6 threads on the OV5647 sensor (Arducam/Zerocam) to M7 threads with this casing. Before changing the threads, you need to remove the original M6 lens casing from the OV5647 sensor body. To do this, you can carefully…
About The axle of my cousin's playmobil broke, and a replacement part is no longer available. So I recreated the part from measurements of the original. The part is for the #5640 truck (see photos) Printing Use ABS or PETG Layer height…
I made this camera mount for my Prusa Mini+ and 5MP Arducam (https://www.amazon.com/gp/product/B0867C9SZP) Thanks to @andimoto I used a similar way to mount to the nozzle fan. This camera plugs directly into a Raspberry Pi running OctoPi…
This model is compatible with the lego system.
OV5547 Pi camera mount for a lack enclosure. I needed something quickly so knocked this up. It is designed to work with this camera housing specifically from Cults3D: https://cults3d.com/en/3d-model/tool/boitier-camera-rasperry-ov5647-ir…
3D Model of the Arducam Day-Night Vision Camera (Fisheye) OV5647 5MP linked below. LINK: https://a.co/d/fcFQiCM
A wrench for focus adjustment of LILYGO OV5640 camera See the original model for the camera holder.
Adjustable frame for lack table enclosures
Under desk mount for the Anker 564 USB-C Docking Station.
The story is that I broke this part in some friends dishwasher when I was over for the weekend. Had the model been available back then, I would have stood a chance to print it and leave their place with a fixed dishwasher. Since I had to…
This make, holds the small camera on a pillar in place. It is a friction fit on the screws for the belt tensioners. This version has a 30° angle and fits for my needs. You can just put the camera on it and fix it with two zip ties. It…
This mount is for the metal case enclosed Arducam OV5648. I used this one . It will only work on the Switchwire if it is the enclosure is not used. there is not room for the front panels. BOM: 1 x M3 heat set insert (3x5x4) 1 x M3 6mm…
Front and back pieces should fit together snugly and remain in place with/without glue.
A simple replacement paddle for MFJ-564 Iambic keyer. Model is ambidextrous. The mounting holes are designed for 2mm bolt diameter. If you like my work and wish to support me then you can buy me a coffee ! Print Settings Printer: Elegoo…
Simple mount for an OV5640-type USB camera to fit on the front bar of a Micron+. May fit other printers with 1515 frame. Angle of camera and screw holes were chosen for my camera, but they seem to be fairly common across generic OV5640…
The wheel hub was damaged and instead of spending $100 for a new wheel assembly, I just created this model. I suggest putting a drop of lubrication inside the hub. I made these from ABS. Long term testing needed.
Mount fitting cheap Arducam: https://www.arducam.com/arducam-ov564 Changed also connection pins by +0.1 mm to tight fit.
I needed a camera for my Voron Trident that would fit to the underside of the front rail due to the lighting ( Disco on a Stick ) being fitted to the inside of the top rail and not hit the toolhead. I wanted to make the camera adjustable…
remixed to fit this mount better. https://cults3d.com/en/3d-model/tool/boitier-camera-rasperry-ov5647-ir
This model allows you to mount an Arducam OV5647 Raspberry Pi Camera to the X-Axis Motor Mount, providing a stable mount that moves with the Z-Axis vertically. Designed for Prusa MK3S/MK3S+. Compatibility with other printers is possible…
Couldn't find any mounts for this combination, so made my own. Holds an arducam ov5647 and an HDMI-to-CSI adapter board on the back using standoffs. Uses M3x8 screws on the joints, mounts to extrusion using an M5 screw (allows for…
NUMERO DE PROYECTO: 33564. AUTORES: Fabio Martinez Mostajo - Nicolas Emilio Montero Gutierrez. ASESOR: Luis Augusto Ortega Zeballos. ESCUELA: La Salle Tarija Particular. CATEGORIA: Ciencia Aplicada.
A replacement hood rubber mounting for many BMW models. This is a replacement for BMW part number 13411705564 . I created this part specifically for my BMW E28 535i but it is used on the E30, E36, E46, E34, E39, E24, E23, E32, E38, E53,…
Eine Wandhalterbox für die Marantec Digital 546. Print Settings Printer: Selfmade Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 or more Filament: noname PETG or PLA Notes: have fun Category: Tools
Printed from ABS-T, mount plate facing down with supports without any problems. Probably will fit also other ACS gascolators.
Model to replace the IKEA part #156433 Finnala Sofa and Ottoman Connector
These OV5640 camera modules are super cheap (under 10€) on AliExpress and are perfect as 3D printer cameras, so I designed a mount to put them on the inside of the Creality Printer Tent. Prints within a few minutes and without any…
ORGANIZZATORE GT564 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
I created a slightly taller foot for the Rowenta VU5640 fan. My vacuum robot was constanly driving onto the base of the fan. I printed it from TPU / flex. As I have two different versions of the Rowenta VU5640, I can tell you the both…
modification for OV5647 camera modul
Stand for my leitz 5645 for gridfinity, non-stackable Thinkercad link: https://www.tinkercad.com/things/bmbQyFMIKMm-leitz-5645-gridfinity
Plant Cam: Square Press-Fit Socket for Autofocus OV5640 Plant Cam is a compact timelapse camera made exclusively for plants. I started this project with the goal of spotting problems early, understanding when to water, and monitoring my…
This is a camera mount for the Waveshare OV5640, adapted from Voxel3D_NL 's HappyCam. Motivation I preferred to put a chamber light strip on the inside edge of the 2020 extrusion, so I wanted the camera to mount beneath the extrusion…
Ive created this OV5640 camera holder for cheap AliExpress cameras to observe my prints remotely with Octoprint. Ive used the existing Creality Nebula holder for mounting the piece and added the HappyCam holder to hold the OV5640 PCB with…
This is just a remix to fit my DuraTech 1564 Soldering station (TS1565 Pencil). https://www.printables.com/model/401191-heat-insert-drill-press/files
I created this to utilise PanzerObserver's OV5648 Camera Mount in my Voron Switchwire prior to attaching the panel enclosures. It allows the camera to be positioned high up at the front as if attached to the top panel. The model uses a…
A printable holder for a Raspberry Pi Zero 2 W and an OV5647 camera module or similar compact Raspberry Pi camera. It is intended to give a stable camera view of a 3D printer running Klipper with Mainsail. What this is for Use the holder…
A small and simple 2020 extrusion mount for an OV5640 camera to be mounted just below the docks on the buffer crossbar. Uses (3) M2x6 self tapping screws to secure the camera to the mount. Two mount options are provided with a slight…
Modified main housing for PanzerObserver Micron Remix in order to allow fitment of Arducam OV5640 with heatsink. Mine unexpectedly came with heatsink and would not fit, but I thought it would actually not be a bad idea to use it anyways…
A remix of KeepTheBOX's ESP32 Camera Mod for CORE One, which follows the Buddy3D camera's three-magnet corner mount. All credit for the design goes there, and like the original this remix is CC BY-NC-SA 4.0. It's built for a Seeed XIAO…
Parametric 6.8cm tall object with rounded circular geometry and a voronoi pattern. Engineered for precise 3D printing.
Under desk mount for the Anker 564 USB-C Docking Station.
