Counting matching models…
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
I needed a simple card insert for "Twilight Struggle," so I made my own. It fits 42-44 cards in Standard American size with premium sleeves (90 microns), measuring 27 cm in height so it sit flush with polish cardbox cutout of Twilight…
Sukhoi Su-57 fighter jet Wall Art Silhouette model. Adjustable size. I accept model suggestions.
I redesigned the original model in order to better fit to cz 457 lrp Please print with many walls and durable rolls
The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Imitation of .357 Magnum cartridges. I share 2 versions, one classic 1:1 and the other with a hole for the neck or on the handle. It prints really well.…
A Classic of Engineering Decorative Art Chassis-No. 57.591 (R. B. Pope) For quite some time, experts all agree that the Bugatti 57 SC Atlantic Coupé belongs in the most beautiful cars that were ever built. Its streamlined body is a…
needs to be gloued to the boat.
In addition to the commonly broken display hinges, I also had this latch break on an IBM P70 / model 8573 computer. As a result, the display would no longer stay latched closed. I measured the original part and created a rough replacement…
Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4, PLA.
Introducing the ultimate companion for your vintage DYMO 1570 label maker - a sleek, 3D printable wall mount! Designed to keep your trusty tapewriter within arm's reach, this model marries convenience with a touch of nostalgia. Crafted…
Please click ❤ LIKE ❤ if you appreciate my work 😊 Classic elegance and timeless design – now as a 3D printable wall piece. This Bugatti Type 57SC Atlantic model pays tribute to one of the most beautiful and iconic cars ever built. Its…
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
It was created for Ford Mustang, fits perfectly into the rim hub, precise measurements. Test on original Ford Mustang rims
Diesen Trichter habe ich genau so erstellt, dass er auf den 57 mm Siebträger einer Lelit-Espressomaschine (bei mir: Grace) passt. Dabei habe ich darauf geachtet, dass er innen bündig ist und außen begrenzt ist, damit innen das Pulver bis…
OneReach – Adaptive Back Grooming Extension for Philips MG5720 Achieving thorough back grooming is often a challenge – especially for individuals shaving alone or those with limited mobility. OneReach is a foldable, modular extension arm…
Foto ist ein Beispielbild. Photo is an example image.
I made this on Fusion in about 4 hours because I wanted switchbacks, blinkers, and running lights on my 2003 Tacoma in the upper corner by the headlight. It uses a 3157 bulb plug "90075-60060" OEM from Toyota. I used an LED 3157 bulb from…
Created with love for Radio 357 I traced the logo used on the website to create this keychain collection Available in four designs: Full name and logo Only full name Only logo and 357 Only logo No MMU needed, simple filament change at…
esta pieza es imprimida con la impresora 3d
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
So, I was making a CF-101B voodoo display for my grandfather and decided to make a J-57 turbojet engine (or something that approximates it) to go along with the airplane. The goal was to make a simple turbojet that went together w2ithout…
This model is compatible with the lego system.
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
Collection of metric cap nuts including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Modeled in Fusion 360. Sorry for not posting in a while, I was busy working on a few projects that I'll upload soon. I designed this as a counterpart to the F-22 I also designed. The shaping isn't 100% accurate, but it's pretty close. No…
This is a 3D model of the LEGO Star Wars Blaster #57899 in minifig scale. I'm currently working on a human sized version similar to this design which is split into multiple parts small enough so they can be fitted on most of the common…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.
24NOV2025: SOME CORRECTIONS AND CHANGES ARE REQUIRED. EXPECT ADJUSTMENTS BEFORE 01JAN2026 Both Fleischmann and Märklin have had a German "Eisenbahnkran" in their model program for decades. For many a boy in the 60s and 70s it must have…
This model is compatible with the lego system.
This model is compatible with the lego system.
Aliens APC, connecting pieces of filament, pins and gluing, m3x8 and m3x10 screws needed viz galeri fotos APC wheels rotate and turn in sync, rotating and sliding cannon, rotating front cannon, sliding side doors, interior from side door…
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
Threads into the filter for a secure seal so the filter can be removed from the tight space without spilling oil. Suits: 2013-2019 Dodge Ram Cummins Chrysler Part 5083285AA Oil Filter
My take on a single shot adapter for the 22LR CZ457. The main difference between this and other single shot adapter designs is the integrated spring on the front that lifts the bullet such that it enters the barrel chamber without…
Zentriering von 57.1mm auf 66.6mm in 10mm und 12mm tiefe Hub centric ring from 57.1mm to 66.6mm in 10mm and 12mm depth NEW VERSION ONLINE V2-→12mm V3-→10mm Gedruckt in PETG//Printed in PETG 0,12mm Qualität//0.12mm quality 0.4mm…
;tldr - Quick Start: Select the model (! Use Prusa Slicer 2.6.0 or newer ! ) - “Direct Drive” for the MK4 or “Bowden” for the Mini+., Additionally, you can select a layer height to test. Simply load the file in Prusa Slicer and slice the…
This model is compatible with the lego system.
drapeau de mise en sécurité pour CZ455- 457 0.20 pla support seulement sur le plateau
Modeled a simple wall mount to hold the STIHL BGA 57 Leaf blower. Printed in Prusament PETG
This model is compatible with the lego system.
A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.
1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines 8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid. 2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.…
Empty chamber / magazine flag for CZ 455, CZ 457 rifles in 22LR. LH versions including.
I printed from ABS. Place it on the reverse side to print a stronger pin than in the photo. Use support! After printing, stick anti-slip material on the back and top for better performance.
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
This adapter fits on the Bosch GKS 18V-57 circular saw. It slides over the back and then attaches with a screw on the front. So it won't come of the saw. If you wan't to use the screw on the front of the saw to attach the adapter you need…
This model is compatible with the lego system.
.357 Magnum, also known as .357 Smith & Wesson Magnum or .357 S&W Magnum, is a centerfire handgun cartridge designed in the United States of America by Elmer Keith, Phillip Sharpe, Douglas Wesson, and Smith & Wesson in 1934. Print this…
This is the second rendition of my first case ( here ). The case got an entire overhaul while mantaining the low profile gpu sandwich design. It consists of 10 pieces, it can be printed with a small printer and does not use threaded…
Someone at work asked me to make a replacement Safety 1st Everfit & Grow and Go car seat cup holder after his kid threw one of them out the window while they were driving. I used a caliper and copied the one he had left to the best of my…
This model is compatible with the lego system.
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
This model is compatible with the lego system.
Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…
This stand for a Logitech Ergo M575 trackball mouse will give the mouse an angle of 30 degrees relieving strain on the users arm for a comfortable experience.
Two holders: for dual toothbrush (3 different versions) for quad heads The thing was inspired and partially remixed from following sources: https://www.thingiverse.com/thing:1916335 - for toothbrush holder v2…
Round Hat block stretched to 105% in X direction and 95% in Y direction Printed with 6 perimeter layers and 2% infill
The original one is very good, but I preferred to move it on a support more towards the back of the stand so that the millennium falcon is more centered, I find it prettier visually.
Wiki Link: https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS) Add a filament change about there for the 2-color look.
1:200 Desk Model of the Boeing 727-200. The .3MF file contains all the parts for the print with seams and supports added. Use the STL to print individual parts. Requires glue for assembling.
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 3/8in Ratchet…
This model is compatible with the lego system.
Gwr 57xx 5700 class model rail model train british rail steam locomotive tank engine
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
This Cable Cahin was inspired by Marius Hornberger design Its redesign to fit my needs with endconnectors This is for my PrintNC machine.
CZ 515 - 22LR 10 round magazine Fully DIY 10 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
Description This is a switch blank for a Golf Mk1 dash. Specifically, I designed this for the pictured area of my 1991 Cabriolet, above and below the hazard and defrost switches to the right of the instrument cluster, but it should fit…
The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge that was used as the German service cartridge in both World Wars. Category: Sport & Outdoors
CZ 457 Bore Cleaning Guide With Bolt Catch.
This model is compatible with the lego system.
This is my take on the AR-57 for airsoft. The Echo 1 version is hard to find in my area and I really wanted to get one, so I decided to make one for my ICS. This will work with base ICS lower Receivers along with the CXP Receiver. The…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…
I have this battery-powered saw, which is pretty good but had one big flaw. The dust collection adapter didn't fit the standard 35mm diameter hoses. Not even the hose from the Bosch vacuum. They always came loose. I don't have any other…
Blank cover for the VW Polo 6N1 or SEAT IBIZA, INCA, CORDOBA
Korth magnum sport 357 full scale model
This model is compatible with the lego system.
A 45° wedge stand to hold the Logitech M570 trackball mouse. Held in place via ball and battery holes. Place to store battery cover. Find ergonomics better than flat and takes up less space. Print instructions Wedge print is hard plastic.…
A replacement battery cover for a Logitech Ergo M575 trackball.
Ergonomic base for the Logitech m575 trackball; differently from other similar models, this does hook to the bluetooth usb dongle slot and the thumb-ball hole, allowing for a far cleaner look!
This is the perfect coffee / espresso tamper in 4 different sizes: 57mm (Ascaso), 57,35mm (Lelit), 58mm (most of the other brands with 58mm grouphead) and 58,55mm (Lelit). I'm using the 57mm version with my Lelit PL41TEM and the Ascaso…
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…
This clamp is perfect for combining shure sm57 and other small diaphragm condenser mics and having them aligned. It is useful for hihats snares guitar amps recordings and much more!!!
The .357 Smith & Wesson Magnum, .357 S&W Magnum, .357 Magnum, or 9×33mmR (as it is known in the unofficial metric designation), is a smokeless powder cartridge with a 0.357 in (9.07 mm) bullet diameter. It was created by Elmer Keith,…
lego technic half beam cam Print Settings Rafts: No Supports: No Infill: 100% Category: Mechanical Toys
This model is compatible with the lego system.
Two simple arms/props to hold open the lid of the 57L (15gal) Fluval Flex aquarium. They are long enough so that they just fit diagonally on a Prusa MK3S printer bed (just a smidge over 29cm in total length). Update: Two shorter…
A stand to make the Logitech M575 angled at 30 degrees for ergonomics. This will lock tightly to the bottom of the mouse
M3 DIN562 square nuts are difficult to find in North America from retailers like Amazon, but M3 square nuts meeting DIN557 specifications are very easy to come by. Because of this, I slightly modified the original Prusa i3 MK3S print fan…
This is a CZ 457 22LR Rifle Empty Chamber Indicator (ECI) Magazine used with a MDT ACC chassis. Filament: Prusa Orange PETG
Printed in TPU/FLEX Tire 43.2 x 28 S Balloon Small : Part 6579 | BrickLink Wheel 43.2 x 28 Balloon Small with Axle Hole (+ Shape) : Part 6580a | BrickLink
Plastic follower for CZ 452/455/457 metal 10rnd magazine reduces friction and rattling. Fits magazine on the picture. I don't know if it will fit other 5 or 10 round magazines. Print on the side with supports.
CZ 512 22LR - 15 round magazine Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
